Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • USA

Placa de distribución de alimentación manía Rey Quadcopter

Placa de distribución de alimentación manía Rey Quadcopter

QTY:

Now save guardar 0,00 € 0,00 €

4,62 €
Stock:
Peso:
38 g
SKU:
9171000033

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

Diseñado en casa por el HobbyKing Enginerds, esta placa de distribución de energía útil tiene la misma impresión de pie como los tableros de control Multri-rotor y es la solución definitiva para el cableado de distribución de energía ordenada. Sólo tiene que utilizar conectores de 3,5 mm macho en sus CES y conecte una batería. El PCB es chapado en oro para la eficiencia óptimo y también cuenta con un puerto Bling (aka 2 pines JST tamaño de potencia auxiliar a cabo) Perfecto para los LED de alimentar o cualquier accesorio instalados en su Quadcopter .

Caracteristicas.
Actual: 4 x salidas 20A (MAX)
Entrada de energía: XT60 con alambre de 12 AWG
Potencia del motor: 4 x 3,5 mm enchufe hembra bala
Salida Aux: JST 2 pines compatible
Peso: 27,3 g (incluyendo cables)

 

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    9171000033
  • Brand:
    No
  • Peso ( g)
    38.00
  • Longitud
    120.00
  • Ancho:
    6.00
  • Altura:
    100.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
A little bigger than the photo shows. It's 10 cm X 10 cm or something near to that.

The power in cable seems fragile because it's a 90 degree connection. I believe it can handle more then 80A, something like 90 or 100A for some seconds.
Quality
Value
Overall
Quality
Value
Overall
Works great! Clean Install!
Quality
Value
Overall
Quality
Value
Overall
perfect distribution board for 250 racer drones
Quality
Value
Overall
Quality
Value
Overall
perfecto para mi quad copter y muy limpia coneccion electrica
Quality
Value
Overall
Quality
Value
Overall
good materials, simply and easy to assembly. it's a good and valid product!
Quality
Value
Overall
Quality
Value
Overall
This a need for a quadcopter. Very good quality
Quality
Value
Overall
Quality
Value
Overall
this board is really helpful and good quality for its price. also the female bullet plug are not centered on each side which might cause problems for some people.
Quality
Value
Overall
Quality
Value
Overall
After I installed this product in my Quad with nylon bolts and rubber mounts I found it was leaking nearly 4 volts into the aluminium frame. After taking it of the frame I found it was leaking volts through the rubber pad on the bottom of the board. Who has heard of rubber passing electric current, that pad is there to stop this happening. Don't buy until they use a better rubber product. If you have already installed this in a Quad my advice is to check for voltage leak before you fly again, these batteries do not like shorts. Albert.
Quality
Value
Overall
Quality
Value
Overall
Distributes power effectively without problems.
Quality
Value
Overall
Quality
Value
Overall
ottima! la monto su tutti i miei modelli
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.