Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Controlador de velocidad sin escobillas HobbyKing 30A BlueSeries

Generating Links

Controlador de velocidad sin escobillas HobbyKing 30A BlueSeries

Precio:

Now save ahorra 0,00 € 0,00 €

12,45 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
HKz30A
¿Envío gratis? ¡Haga clic aquí! aprender más!

Su no es "misterio", donde se realizan estas CES, ahora están disponibles a precios HobbyKing.

Construido con MOSFET de canal N importado y un ultra rápida Atmel MCU y los latidos del corazón hacen de este un alto rendimiento ESC con excelentes capacidades de sincronización. Este CES tiene un BEC 3A para servoalimentación fiable sólido.
Programable a través de un R / C controller.It le permite programar todas las funciones para satisfacer sus necesidades específicas, lo que hace que sea eficiente y fácil de usar.

caracteristicas:
Extremadamente baja resistencia interna
Súper suave y preciso linealidad del acelerador
Sobre la protección del calor y de la sobrecarga
Apagado automático cuando se pierde la señal o interferencia de radio se convierte en grave durante más de 2 segundos
Es compatible con los motores de altas RPM
la protección de armado de potencia (evita que el motor funcione accidentalmente cuando está encendido)
El nuevo software de programación avanzada

Funciones de programación:
ajuste del freno (se recomienda utilizar los frenos por sólo plegables aplicaciones apoyos)
Tipo de batería (Li-Po o NiCd / NiMh)
ajuste de corte de bajo voltaje
restaurar la configuración por defecto de fábrica
ajustes de sincronización (para mejorar la eficiencia y suavidad ESC)
empresas de nueva creación aceleración suave (para utilización con la caja de cambios y helicópteros delicados)
modo de gobernador (para aplicaciones de helicópteros)
La rotación del motor (hacia la derecha \ antihorario)
frecuencia de conmutación
Baja tensión de tipo de corte (reducción de potencia orirnmediate apagado)

Valores predeterminados de fábrica:
Freno: off
Tipo de batería Detección: Li-Po con la célula automática
Baja tensión de umbral de corte: Medio (3,0 V / 65%)
Configuración de sincronización: Automático
Aceleración de arranque suave: Medio
El gobernador modo: OFF
Frecuencia: 8 kHz
Suave Tipo de corte de voltaje: Reducir el poder

Especulación.
Cont. Corriente: 30A
Burst actual: 40A
Batería: 2-4 célula Lipo / 5-12 de la célula de Ni-XX
SBEC: 5V / 3A de salida
Tamaño: 25 * 43 * 9mm
Peso: 28g

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Jose Maria | Comprador verificado

  • Overall
  • Quality
  • Value

HobbyKing 30A BlueSeries Brushless Speed Controller

Mar 13, 2018

Very high quality ESC at a very affordable price.

Martin | Comprador verificado

  • Overall
  • Quality
  • Value

Having 6 of them on two identical tricopter setups with low Kv bell motors..

May 07, 2017

I've bought three of them for my custom made carbon fiber 700 tricopter setup and now another three for a identic backup clone.. Esc's are heavier due to alum. chiller but cofigurable for all kinds of motors including low Kv bell motors (there are three timing otions for this purpose).. Bench tested on max 35A with no problem to pulling more than 1200g.. Slightly warm, dual capacitors, fast atmel 328 MCU and programable with jumper card which i prefere over LED one (plug ESC, set jumpers to either positions, plug used old battery, beep twice, done), reversible, programable via Tx and has safe option for avoiding to spin accidentaly full throttle..

My setup: Talon foldable tricopter custom design (long booms) frame, D4023 850kv brushless motors, 30A blue series ESC + program card, MG servo, HK atmel 328 based fly control board (tricopter fw flashed using avr studio and flashing usb board), 5500mAh/25C LiPo, Trcv Turnigy 9x, Rcvr 8ch v2, Gemfan 12x4.5 props cw+ccw, AUW (all weight up) 1200g..

Michael | Comprador verificado

  • Overall
  • Quality
  • Value

GOV-Mode not availiable for Usage in my Helis

Apr 29, 2017

I ordered this one to use it with a HK250-GT FBL and I was unhappy to find out that GOV-Mode isn't availiable. Manual says, it has only an 'soft start' option in the Heli-Menu, but that has nothing to do with GOV functionality. That's why this item gets only 3 points in the 'overall' category.

Andrea | Comprador verificado

  • Overall
  • Quality
  • Value

Good Choice

Nov 08, 2016

Good Choice

Andrea | Comprador verificado

  • Overall
  • Quality
  • Value

Good Choice

Nov 08, 2016

Good Choice

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 04, 2016

i'll be testing these on the Y6 frame, should be nice

fogey | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 04, 2016

Got these for $6plus, I used the B.S. ESC's for years and NEVER had a problem.

Dozens in planes. You like ZTW.... guess what, ZTW makes them. I use one of these in a 8000kv motor on low timing. No problem all the way thru the throttle curve!

Mack | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 16, 2016

Ive bought one of these so far and Im very happy with how well it works and plan on buying more for my next build! Im running a 2212/6t 2200Kv motor with a 6x4 apc prop and a 3s lipo and the esc doesnt even get warm!

Pauluzz | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 12, 2016

Not the best ESC in the world. Ordered 4 and one wasn't programable with the programming card. During programming the ESC burnded out... So now I've ordered 4 Afro ESC's which have already proven to be reliable in my other multicopters.

Mack | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 03, 2016

Im running this esc on a ft versa wing with a 2212 6T 2200 kv brushless motor with a 6x4 prop works great doesn't even get warm!

Archivos de clientes
No File Name Download [175]
No File Name Download [4675]
esc programming Download [1751]
esc programming Download [1751]
Pads for simonk flash Download [667]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!