Corriente constante: 30A
Burst actual: 40A
Batería: 2-4S Lipo / 5-12s Nixx
BEC: 5v / 2A
Tipo de motor: sin escobillas sin sensores
Tamaño: 70 x 27 x 17 mm
Funciones de programación:
Modo de servicio: Adelante con freno / avance y retroceso con / Adelante freno y marcha atrás
Aceleración: 6% / 9% / 12%
Protección de baja tensión: Ninguno / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Iniciar el modo (el puño): Nivel 1 / Nivel 2 / Nivel 3 / Nivel 4 / Nivel 5 / Nivel 6 / Nivel 7 / Nivel 8/9 Nivel
Fuerza inversa: 25% / 50% / 75% / 100%
Tiempo: 0 ° / 5 ° / 10 ° / 15 ° / 20 ° / 25 ° / 30 ° / Automático
SKU (Número de Referencia):
Peso ( g)
- SKU (Número de Referencia):
VERY DISAPPOINTED WITH THIS PRODUCT. I BOUGHT THIS AS A REPLACEMENT FOR THE HOBBYKING HYDROTEK F1 AND IT EXPLODED AS SOON AS THE BATTERY WAS CONNECTED.
CHEAPLY MADE PRODUCT IN MY OPINION AND NOT DURABLE.I WOULD NOT ADVISE ANYONE TO BUY THIS PRODUCT.great product with a great valueWszystko OK
Działa jak powinien zakupiłem łącznie z 20 sztuk i zero problemów
Stosuje go z Akumulatorem PB12V 12Ah
Nic lepszego za te pieniądze się nie kupi .
Work well, nice value for money escNot a bad esc for the price, but it does seem to get a bit warm when in use. I use this for a tug boat application so over all it seems good for now.this is a very high quality product at a very good price. It can handle the current very well with almost no heat. it is a bit chunky making it hard to find space in a smaller model but with some time and effort it should fit in almost anything. The watercooling system is very easy to attach and the manual gives a very detailed specs of the ESC. with plugs pre-installed it makes your job alot easier and saves time. you will have to put on your own bullet connectors though but this i very easy and doesn't require any soldering. .Love the fact that its completely sealed and works great with a bl2848sl .For the price, this is a very good ESC for small size boats. It has reverse functionality with set speeds so if you are using it with a flex shaft it should not unwind it.
It's almost completely sealed (only part that is expose is the capacitors) so there is no fear of this getting wet. It has two water inlet and two outlet. If you have two water pick-up on your boat then you could use both ends or you could just loop one side with the other side.
It doesn't come with terminal connectors on either the battery lead or the motor lead so you have to either have these already or you purchase it at the same time. Most small size motor uses a 3.5mm gold connector so I would suggest to get this.
With the exposed capacitor, you can purchase liquid tape and cover this completely so that you have no fear of using your boat in salt water. Make sure you also use it on the back of the battery terminals and motor terminals.nagyon j termk n meg vagyok vele elgedve!!!This boat ESC is water cooled and is the same value as that in the stock hydroplane model. Should give the same performance.
781477237X6487X36.pdf download now [567kb] HK 30A ESC Modified Manual download now [309kb] HK_30A_BOAT_ESC_MOD_MANUAL download now [309kb] Programmierung Boat ESC 30A download now [2kb] HK_ESC_Boat_All download now [567kb] Using the HobbyKing Boat ESC Programming Card.pdf download now [126.92Kb]