Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global

HobbyKing AT-6 sin escobillas EPO Plug-n-Fly

HobbyKing AT-6 sin escobillas EPO Plug-n-Fly

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
1415 g
SKU:
HKAT6-C
Descripción
del

La aviación norteamericana Texan T-6 era un avión de entrenamiento avanzado monomotor utilizado para entrenar a pilotos de las Fuerzas de Estados Unidos Ejército de Aire, Armada de Estados Unidos, la Real Fuerza Aérea y otras fuerzas aéreas de la Commonwealth británica durante la Segunda Guerra Mundial y en el 1950.
El HobbyKing AT-6 es una parkflyer EPO muy cuidadosamente diseñada. Este plano Plug-n-Fly R / C viene con una outrunner sin escobillas, todos los pre-instalados ESC y servos. Todo lo que necesita es una batería de 2S y el receptor.
El tiempo de construcción es de unos 15 minutos y no requiere pegamento.
La construcción de EPO dura mantiene el modelo de rebotar desde hace más fuerte y el motor de 2607 outrunner ofrece un montón de energía en tan poco como una 1000 mAh Li-Po 2S.

Especificación:
Envergadura: 750mm (29.5in)
Longitud: 570mm (22.4in)
Peso: 222 g (sin batería)
Motor: 2607 sin escobillas outrunner 1400kv
Objeto: 7 pulgadas
ESC: 10A sin escobillas
Batería: 7.4V 1000mAh 2S1P (no incluido)
Batería tamaño del compartimiento: 99x33x30mm
Servos: 5g x 3

Necesario:
Su TX y RX
7.4V 1000mAh de la batería lipo 2S

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    HKAT6-C
  • Brand:
    HobbyKing
  • Peso ( g)
    1415.00
  • Longitud
    795.00
  • Ancho:
    145.00
  • Altura:
    240.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This little plane looks wonderfull. Even opening up the box and putting it together gives you a sense of a great warbird. In the air it looks great with the colouring of silver and red.

What I would suggest is a bigger moter for more speed and a folding prorp. Do not try and fly this plane slow as it will drop a wing and once you stall the wing-tip there is no recovery. build the fire wall up as all crashes on this plane impacts on the nose and this would be the first area to collapse beyond repair.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used this as my first plane. I did use the flight sim to get used to it first. First 3 attempts were crash off launch. I got rid of the peanut throwing it for me and no probs.. Repairs easy with epoxy and still flys great afterwards. A real trooper! I use the half response switch on the radio and its very steady in the air.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome little plane to move onto from Bixler
With a 1000mAh 2S pushed all the way forward, 10g in the nose and a GWS 7x4 prop it will fly straight and level with your hands off the controls. I have also flown on a 3S 1000mAh without any trouble.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I had swap out standaard ESC and motor. It's now HK 25-30A ESC with Turnigy XP D2826/10 1400kv & nanotech 3S 1300mah 45C-90C. Prop APC 7x6. I have about 7 min flight time and unlimited vertical. Speed is about 100km/h. I want to try 4S on this so it would be a rocket!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
First time I got something from Hobbyking I was realy unhappy with. Needed to add a lot of weight for to get to the right COG. Parts didn't fit well, paint rubbs of extreamly easy, motor mount wasn't glued in right and and plane allways rolled to the right, no matter how I trimmed the ailerons (at every speed).. Crashed it several times. Lost one weekand and (premier for me) my nerves with the plane. Maybe I just got a bad one, nevertheless I will not give it another try.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Voici mon avis apres quelques mois d'utilisations :
C'est vraiment un superbe avion , il faut quand meme avoir des bases avant de le piloter mais une fois bien en main il est agrable piloter.
Au dbut je l'utilisais avec une lipo de 1000mAh 2S , helice d'origine 7X6
puis j'ai change la lipo pour une 1000mAh en 3S avec comme seul changement l'helice en 7X3,5 pour monter dans les tours et que l'esc ne chauffe pas trop .... du coup il vole bien plus vite .
Je rajouterai ausii qu'il est plutt solide car des crashs il y en a eu , il se recolle merveille , petit bemol quand meme sur la qualit des servos , j'en ai deja change 2 sur les 3 presents .
Verdict : pour le prix , il ne faut pas hsiter une seule seconde , foncez en acheter un ( il existe mme en jaune maintenant ) 60 euros TTC livr :)




believe the CG is the 2 small circle on top of the wing near the fuselage. With 7.4V 2S 1000mah batt stuff all the way in to the nose of the plane, the plane is balance when balance on that 2 small circle. - Motor model is Hobby King CC205AX-28 - Motor shaft is 2mm screw on - ESC is Hobby King 10A. - Prop used is 7x6 GWS RS. - comes with spare prop and prop cone - Took 15 min to assemble I am running on Turnigy nano 3S 850mah. Have to cut the batt compartment to fit. Running the original prop with 3S will over heat the motor after 3
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
awesome model, looks great on desk and is strong and duty.

Not for absolute beginner. After many crashes and lot of work for fix i found final solution:

she must be flown quickly, get speed and she'll fly stable.

use 3S 1000/1300 cell.

replaced esc with a 25 amp esc (to be honest pre istalled was working fine, no real need to replace, but it is a bit slow on reaching full power).

replaced motor holder with a stronger and bigger wood firewall (motor screws broken original one doing one of the many crashes she did).

use propsaver (very important) because even landing on grass often brake prop.

fix canopy ancourage because magnets are too weaks.

switch d/r on transmitter if is windy or not.



after that she flyes well, does loop, tonneau, inverted fly, and is responsive and fun. i get lot's of fun doing hard and spectacular manouvres even if I'm not an experienced pilot.



i'll get another when mine 'll be too damaged
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Order from DE warehouse. Deliver to Netherlands in 2 days. Package is well packing. Servo quality is rubbish!!! 2 cames broken. I recommend to change for another with quality. I fly it with zippy 2S 1300mah en it controlable. Maybe for beginner just keep it on 2S. With 3S you can start aerobatics flying.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
25 grams of weight in the nose and it flies like a dream. My 10 year old son just likes flying it,and like the combat with me. GWS 7*6 is the best prop for standard setup. Stock prop breaks very easy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ordered this AT-6 because of its nice silver with red colour combo, but what i've recieved today when it arrived is a all yellow, no decal AT-6. What a disappointment...
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • HobbyKing AT-6 Brushless EPO Plug-n-Fly

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.