New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

HobbyKing Dual tormenta F3P Ultralite EPS biplano 3D cubierta w / 850mm Motor (KIT)

HobbyKing Dual tormenta F3P Ultralite EPS biplano 3D cubierta w / 850mm Motor (KIT)

Discontinued Product

Please continue searching for a similar product.
SKU:
9095000007
WANT FREE SHIPPING? Click here to find out more!

La tormenta dual es la última adición a nuestra gama ultralite modelo 3D F3P interior.

Construido a partir de una combinación única de tablero de la espuma, película de peso ligero y de refuerzo de carbono. El resultado es un fuselaje extremadamente ligero que es más rígida que la mayoría de espuma '' completa aerobats interiores. No estamos bromeando - Las puntas de fuselajes desnudos ensambladas las escalas en un diminuto 55 gramos y es rígida!

La tormenta dual es una máquina F3P que va en serio, que tiene las características de vuelo precisos, está libre de torsión del fuselaje en vuelo y súper ligero de peso!

Este kit incluye un outrunner sin escobillas 1700kv y GWS estilo de 8 x 4 de la hélice, junto con 2 diferentes tipos de frenos de aire para los chicos hardcore.

Especificaciones:
Envergadura: 850mm
Longitud del fuselaje: 830mm
Motor: sin escobillas 2204 1700Kv Outrunner (Incluido)
Hélice: 8x4 (Incluido)
Peso del vuelo: 115-140g (. Vuelo inc listo batería)

Se requiere:
ESC: 10-12Amp
Servos: 6-8 g servo micro x 3
Radio: 4 canales
Batería: 7.4v 2S 300-600mAh Li-po

  • SKU (Número de Referencia) 9095000007
  • Brand HobbyKing
  • Capacidad ( mAh ) -
  • Peso 1150.0000
  • Longitud 940.00
  • Packaging Width 70.00
  • Altura 270.00
  • HK Dual Storm
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Flight performance is good but slow rolls, and expected more brittle.

different from what is written in the box with the Web.

The spec is written in the box.
Wingspan: 780mm
Fuselage Length: 850mm
Motor: Brushless 2204 1700Kv Outrunner
Propeller:8043SF or 8040HD
ESC: 6-10Amp
Servos: 4-6g micro servo x 3
Battery: 7.4v 2S 250-450mAh Li-po
Flying Weight: 115-140g (Flight ready inc. Battery)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flight performance is good but slow rolls, and expected more brittle.

different from what is written in the box with the Web.

The spec is written in the box.
Wingspan: 780mm
Fuselage Length: 850mm
Motor: Brushless 2204 1700Kv Outrunner
Propeller:8043SF or 8040HD
ESC: 6-10Amp
Servos: 4-6g micro servo x 3
Battery: 7.4v 2S 250-450mAh Li-po
Flying Weight: 115-140g (Flight ready inc. Battery)

Very good, light, fairly simple to build and great flying characteristics!

https://www.youtube.com/watch?v=7uEOFgJjAGc&list=UUlXevkn7INSuCmaK5TJQThA

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good, light, fairly simple to build and great flying characteristics!

https://www.youtube.com/watch?v=7uEOFgJjAGc&list=UUlXevkn7INSuCmaK5TJQThA

I absolutely love this airplane!! It is an amazing airframe. It can fly hardcore 3d or f3p at walking speed like its on rails. It fly's inverted with NO INPUT and knife edge flight is done with no coupling. It will do flat turns with no aileron input. I have the cg about 1/4" farther back then the recommended cg. I used the included (2202) motor, a Hobbyking blue series 12amp esc with the shrink wrap cut off and the motor wires directly soldered to the esc. My motor leads are about 1" long (this helps prevent timing issues as well as cuts a little bit of weight off) i used Hitec 5035 digital nano servos and a Spektrum AR6100 with the case cut off for a receiver. I am using a 2 cell 180mah 25-40c nano tech pack. I painstakingly built the airframe absolutely square (took about 3 hrs on just the airframe) and used the foam safe CA very lightly as i did not want to add too much weight from the CA. It dose not come with air-brakes, and the cabbain struts are not covered so I Mylared them to add the side force area. also the included servos arms are too short to be used as pull pull arms so I just used a set of Du-bro micro arms to get the appropriate length for a pull pull system. My true flying weight is 111 grams! this airframe makes me want to try the MXS-R or the Saturn f3p airframes. I urge caution when building or transporting the airframe as it is extremely delicate.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I absolutely love this airplane!! It is an amazing airframe. It can fly hardcore 3d or f3p at walking speed like its on rails. It fly's inverted with NO INPUT and knife edge flight is done with no coupling. It will do flat turns with no aileron input. I have the cg about 1/4" farther back then the recommended cg. I used the included (2202) motor, a Hobbyking blue series 12amp esc with the shrink wrap cut off and the motor wires directly soldered to the esc. My motor leads are about 1" long (this helps prevent timing issues as well as cuts a little bit of weight off) i used Hitec 5035 digital nano servos and a Spektrum AR6100 with the case cut off for a receiver. I am using a 2 cell 180mah 25-40c nano tech pack. I painstakingly built the airframe absolutely square (took about 3 hrs on just the airframe) and used the foam safe CA very lightly as i did not want to add too much weight from the CA. It dose not come with air-brakes, and the cabbain struts are not covered so I Mylared them to add the side force area. also the included servos arms are too short to be used as pull pull arms so I just used a set of Du-bro micro arms to get the appropriate length for a pull pull system. My true flying weight is 111 grams! this airframe makes me want to try the MXS-R or the Saturn f3p airframes. I urge caution when building or transporting the airframe as it is extremely delicate.

how do i embed a you tube video onto hobby kins discussions or reviews page??
[youtube]sNTPc6wI2v4[youtube]

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

how do i embed a you tube video onto hobby kins discussions or reviews page??
[youtube]sNTPc6wI2v4[youtube]

Here's a flight video of this plane Just copy and paste this link to se it

https://www.youtube.com/watch?v=sNTPc6wI2v4

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Here's a flight video of this plane Just copy and paste this link to se it

https://www.youtube.com/watch?v=sNTPc6wI2v4

Plane has arrived and It assembled. I got a chance to fly it outside in a bit of a breeze It flew well But doesn't like wind at all. Hovers and 3d flying is so easy it made me look like a instant expert. using a 10 amp esc and a 300 mah 2s pack. I assembled it with 5 minute epoxy I hate foam CA. It is under 140 grams flying weight. ridged???. Well I guess its a mater of what ridged means to you. Control surface flex easy and leading edge f wings flex if you breath on it to hard BUT it doesn't seem to effect its flight. Its very VERY delicate I doubt that it will last me long BUT I ill try to make it last It is very VERY nice little plane. I might try to make a protective box for it so it an last forever. That would make a big difference. for price and quality id say 5 an 5 toughness a zero But that's not in the rating choices If you want to fly easy champion like 3d inside or in no wind days buy this planes its excellent.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Plane has arrived and It assembled. I got a chance to fly it outside in a bit of a breeze It flew well But doesn't like wind at all. Hovers and 3d flying is so easy it made me look like a instant expert. using a 10 amp esc and a 300 mah 2s pack. I assembled it with 5 minute epoxy I hate foam CA. It is under 140 grams flying weight. ridged???. Well I guess its a mater of what ridged means to you. Control surface flex easy and leading edge f wings flex if you breath on it to hard BUT it doesn't seem to effect its flight. Its very VERY delicate I doubt that it will last me long BUT I ill try to make it last It is very VERY nice little plane. I might try to make a protective box for it so it an last forever. That would make a big difference. for price and quality id say 5 an 5 toughness a zero But that's not in the rating choices If you want to fly easy champion like 3d inside or in no wind days buy this planes its excellent.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save