Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

HobbyKing EPO Gran Escala de Anfibios

HobbyKing EPO Gran Escala de Anfibios

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
5680 g
SKU:
ICON-A5

Combine

essential items and
esc
battery
Descripción
del

Construido a partir de una fuerte espuma EPO con retrae el Gran Escala HobbyKing EPO anfibio está listo para su ámbito local o lago sin la necesidad de cambiar la configuración de un tren de aterrizaje de flotadores. HobbyKing EPO Gran Escala de anfibios también incluyó un timón dirigible para un mejor manejo en el agua, un 400 kv motor 3740 sin escobillas, 6 servos (5 x 17 g de superficies de control y de retracción frontal, 1 x servo MG 25 g para los retrae traseros) prop y el cono . Todo lo que se requiere es un 60A ESC, la batería y su propio transmisor y el receptor (Rx / Tx)

El modelo también incluye aletas opcionales en el diseño de las alas que hacen la adición de las superficies de control adicionales en un instante. Que se requieren 2 servos 17g adicionales para esta opción.

Con un área de gallo a cielo masiva y empujador sostener este modelo también haría un gran avión FPV.

Presupuesto:
Envergadura:
1800mm
Longitud: 1150mm
Volar Peso: 2,5 kg
Motor: 3740 400 kv sin escobillas
ESC: 60A (Obligatorio)
Servos: 5 x 17g y 25g 1 x MG
Batería: 22.2V 6s 2800-3200mah (Obligatorio)
Hélice: 12X6E
Spinner: 1.5in

Necesario:
ESC:
60A
Batería: 22.2V 6s 2800-3200mah
Servos: 2 x 17 g (para la opción de la aleta solamente)
Su propia Tx / Rx

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    ICON-A5
  • Brand:
    N/A
  • Capacidad ( mAh )
    No
  • Peso ( g)
    5680.00
  • Longitud:
    1110.00
  • Ancho:
    350.00
  • Altura
    455.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
hi guys,

I bought one of these in pieces. The seller lost the manual.

Any ideas where I could find a manual?

thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
WOW!! Had another two flights today of a friend's dam in South West of Western Australia, and just fantastic to fly a beautiful plane. When they come on line, just buy one, get it trimmed, and have a blast, cheers HK.

I have had this plane for some time now and can only fly when I have the chance of water, but it will also take off grass without the wheels, good training for water. WOW!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just recieved my large scale Icon a5. It is a beautiful model that is well assembled. The pre-installed retracts worked well. Although I did have to modify the plywood interior to fit a large metal gear servo. this in turn caused me to cut up the ply some more to allow room for the rudder servo. Luckily the people at HK thought ahead and left the control wires long making all the modifications run smoothly. I am using the stock motor with an eflite 60a esc and a turnigy 4500mAh 6 cell battery. Lots of power with short takeoffs. the model has excellent balance but you will need to turn down your travel on the elevator, seems the design causes it to be very reactive. Cant wait till my fpv gear comes in so i can test this bad boy for real.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi guys well my icon is finally ready to fly all in all pretty easy assempbly. A couple of points I would like to mention.

You will need to purchase an alloy nose retract as mine failed taxiing on Ashfelt, the plastic cam failed so alloy 25 size retract should fix that.

Secondly to scheibe the correct CofG I have mounted my 3300 6s turnagy under the leafing edge of the wing on a light ply tray.

Other than were good to go!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
got the plane with missing 2 servoes. the nose gear is very week, other than that the plane is super fine. it take off water like real one. i love it and all people will be attracted to it at the lake.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Maiden flight today, no wheels as I fly of grass in South Western Australia, lightish winds, about 10 knots.

Skidded off the grass, drew itself into the air, has a 6S 3000 mah battery, a bit nose heavy but punched into the air really well.

Once trimmed out, flew beautifully, did a slow look, rolled OK, did laps very easily and peace of cake to land.

Then I realised, I was too excited to use flaps which woud have made both take-off and landing MUCH easier, so all good, looking foreward to next flight. Buy it, you will like it! Water should be a real hoot!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent plane, but its too expensive the shipping cost to Europe.

When will this be available at the EURO WAREHOUSE ?

Please sent five plane ICON5 to DE WAREHOUSE



Regards
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got my icon a couple weeks ago, finally had a chance to build it and flew it today for the first time. I was a little leary, thought the thrust may be a bit low, but it flew beautifully on stock motor 12x6 prop, with power to spare. As in previous comments, it does have a tendency to dive when applying full throttle, just have to remember to pull up on the elevator. When taking off on water, pull full elevator to prevent diving when taking off, lands beautifully on water. Retract system is an absolute joke however, the only reason i'm not giving it full stars, i'm installing proper retract servos when i get a chance, have a couple spares laying around. I landed a few times on land already, no real problems with the front wheel, but it is somewhat flimsy so it will need to be replaced or strengthened.

Overall, except for the landing gear, this is the best plane i've flown to date (including my plastic bag specials), i get 15 mins flight time easily on a 6s 3000, and it has good payload capacity so i'll be setting up my FPV on this plane shortly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am working on this. The retract servo was not included as described. The screws in the nose wheel are very short. A lot of people have complained that it is weak but it seems OK but for the short screws. The plastic on the bottom around the nose gear does not cover the hole correctly. There is a massive cockpit area. It has a drain in that area. I plan to put some splash guards since water can be forced up through the guide tubes for the steering and nose retract. There is a water rudder. I plan to use the four included servos on the wings and larger servos in the tail and rudder. The rudder controls the rudder, water rudder, and nose wheel. A bigger servo should be used or separate steering and tail servos.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bear 2



Hi HK server, finished now



25d. For removing weight I would split the fuselage to remove the undercarriage steel cross shaft plus other bits and replace the steel square section tube reinforcement for the aft fuselage and fin. I could also remove the tailplane steel mounting bolts/nuts and support structure.

e. Rear fuselage reinforcement and gluing the tailplane to the fin are lightweight solutions.



26. The manufacture did a good job on the model shape, EPO mouldings and structural integrity, rigging, supplied servos and outrunner really are problems. In all the important bits are right and the rest can be fixed?



27. Hope the enclosed has made sense and will help with another build option.



Fly long and fly safe

verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.