New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Noche HobbyKing FPV250 V4 azul del fantasma Edición LED folleto FPV aviones no tripulados (azul) (Kit)

Noche HobbyKing FPV250 V4 azul del fantasma Edición LED folleto FPV aviones no tripulados (azul) (Kit)

Shipped From:
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

15,66 €
Estado:
En stock
SKU:
366000033-0
WANT FREE SHIPPING? Click here to find out more!

Presentación de la edición HobbyKing FPV250 avión no tripulado Santo V4, un avión no tripulado de tamaño mini con gran FPV y noche volando capacidad de diversión.

El FPV250 es un mini drone FPV tamaño en la medición a un mero de 250 mm. Esta plataforma FPV multi-rotor duradero, de bajo costo es ideal para las carreras FPV o carrera de obstáculos de vuelo y en su campo local, y ahora con la plena longitud del brazo LED de revestimiento superior que iluminan el marco y los apoyos para la orientación translúcida y el ultra-brillante abajo hacia LEDs blancos que hacen todo el resplandor marco en el cielo nocturno y aún más visible en el día. El cuadro de distribución de energía del centro Incluido también ha incorporado un sistema de 5V UBEC para el uso de componentes aux.

El bastidor de una sola pieza es extremadamente duradero, que le da la confianza para ir FPV arrolladora y sin embargo, sólo pesa 110 gramos. La plataforma delantero está diseñado para manejar hasta una cacerola 2 servo y la inclinación de configuración de la cámara y la plataforma trasera compatible con el transmisor de vídeo, para mantener todo agradable y equilibrada. El FPV250 tiene un centro de la bahía lo suficientemente grande para los controladores de vuelo más populares e incluye una jaula de choque superior de protección. Hay cuatro ranuras de la correa integrados en la parte inferior para sujetar la batería en su lugar durante las maniobras de alta G. Los soportes de motor FPV250 pueden manejar cualquier cosa, desde un motor de 1506 a 2208 y los brazos ventilados proporcionar un montón de enfriamiento para su 7 ~ 12A CES.

El HobbyKing FPV250 es un Basher FPV de bajo presupuesto, listo para las carreras de obstáculos o temerarias Spec ClassFPV y ahora la diversión de vuelo nocturno. Es hora de empezar a practicar sus habilidades de FPV, temporada de carreras se está preparando para comenzar!

caracteristicas:
ultra brillante pantalla completa longitud del brazo montado LED
Todas marco claro que agarra las luces LED y resplandores
incluida la hélice claro que ilumine con los LEDs cara superior
• Construido en 5V UBEC y AP
• Una construcción de una pieza para una mayor durabilidad
• Ampliación de la jaula de vuelo 55x55mm protegida de la controladora
• Montaje Soporte para una cacerola 2 servo y la cámara de inclinación y transmisor de vídeo
• Amplia gama de opciones de motor y potencia
• tren de aterrizaje extraíble
• Incluye conjunto de 5030 prop Claro

Especificaciones:
Distancia entre ejes: 250 mm
Peso: 110 g
Altura: 106 mm con tren de aterrizaje y la jaula centro

Necesario:
4 x Motors 1506 ~ 2208
1 batería de 1300mAh 800 ~ 7.4 ~ 11.1V (2 o 3) células LIPOLY
7 ~ 4 x 12A de la ESC
1 x controlador de vuelo multi-rotor
de radio de 4 canales (6 canales recomendada para FPV y el uso FC)
engranaje de FPV (opcional)

  • SKU (Número de Referencia) 366000033-0
  • Brand HobbyKing
  • Capacidad ( mAh ) -
  • Peso 460.0000
  • Longitud 220.00
  • Ancho 20.00
  • Altura 220.00
  • HK Ghost Quad V4
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Nice cheap frame kit that is very easy to setup. just note there is a bit of soldering as you would expect. it is a very stable platform and flies very well. Just be wary the legs are a bit easy to break but they can easily be made from something else to replace them. I made a new one from a small piece of aluminium and it works just the same.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice cheap frame kit that is very easy to setup. just note there is a bit of soldering as you would expect. it is a very stable platform and flies very well. Just be wary the legs are a bit easy to break but they can easily be made from something else to replace them. I made a new one from a small piece of aluminium and it works just the same.

Like many, I snatched up a few of these in various colors during the 2015 cyber sale. They were practically giving them away. I found the lack of any instructions typically disappointing. But, I had put together the black models before so I pretty much understood what I was getting into.

The LEDs are definitely the reason to buy this. I find red and green to be poor choices for the bottom as I'm a bit red/green color blind and from a distance, it's difficult to determine orientation. Those of you with proper vision won't have any problems.

The power distribution board is a nice touch. Just remember that the 5V and 12V output pads are clean power for your flight controller and FPV equipment... don't try to power an ESC from the clean 12v pad like I did, or you won't get past 1/4 throttle on that motor.

The way your bolt down your PDB and FC to the frame is rather poor, but it works.

In summary, it's cheap. The plastic is indeed hard and brittle, but I haven't cracked mine yet. I think the bottom line is that after you spend over $100 for motors, ESCs, flight controller (and more for FPV), why would you want to put it all on a fragile frame? For me, it's a cheap and fun platform for spare parts. I'd buy it again, but not for building an FPV racer, just for a night time fun quad.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Like many, I snatched up a few of these in various colors during the 2015 cyber sale. They were practically giving them away. I found the lack of any instructions typically disappointing. But, I had put together the black models before so I pretty much understood what I was getting into.

The LEDs are definitely the reason to buy this. I find red and green to be poor choices for the bottom as I'm a bit red/green color blind and from a distance, it's difficult to determine orientation. Those of you with proper vision won't have any problems.

The power distribution board is a nice touch. Just remember that the 5V and 12V output pads are clean power for your flight controller and FPV equipment... don't try to power an ESC from the clean 12v pad like I did, or you won't get past 1/4 throttle on that motor.

The way your bolt down your PDB and FC to the frame is rather poor, but it works.

In summary, it's cheap. The plastic is indeed hard and brittle, but I haven't cracked mine yet. I think the bottom line is that after you spend over $100 for motors, ESCs, flight controller (and more for FPV), why would you want to put it all on a fragile frame? For me, it's a cheap and fun platform for spare parts. I'd buy it again, but not for building an FPV racer, just for a night time fun quad.

Good kit, but absolutely no instructions! Luckily if you google "FPV 250 build" there are plenty of guides online.
Quibbles:
The motor mounting plates do not have holes to fit standard 4 hole motors. These will need drilling (or just don't use them and mount direct onto the arms.
The LED strips are not marked, apply power to each one before you mount to determine the correct colour.
The BEC on my dist board did not work for 5 or 12V, didn't matter as I use the one on my ESC.
This kit works brilliantly with a standard KK2.1 board. I bought a KK mini and so had to make an adaptor plate for it to sit on so it could sit above the dist board.
The protective cage on the top will not fit once you have the dist board and FC fitted. You will need spacers to raise it. You will then also need to drill and tap the fitting holes to take a nylon spacer rather than the small screws supplied.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good kit, but absolutely no instructions! Luckily if you google "FPV 250 build" there are plenty of guides online.
Quibbles:
The motor mounting plates do not have holes to fit standard 4 hole motors. These will need drilling (or just don't use them and mount direct onto the arms.
The LED strips are not marked, apply power to each one before you mount to determine the correct colour.
The BEC on my dist board did not work for 5 or 12V, didn't matter as I use the one on my ESC.
This kit works brilliantly with a standard KK2.1 board. I bought a KK mini and so had to make an adaptor plate for it to sit on so it could sit above the dist board.
The protective cage on the top will not fit once you have the dist board and FC fitted. You will need spacers to raise it. You will then also need to drill and tap the fitting holes to take a nylon spacer rather than the small screws supplied.

I doubt anybody could complain about this frame. Using KK2 controller with firmware by Steveis. Baby beast 2206 motors and 12a afro speedy combo pack. Turnigy 3 cell 1400 mha battery and gem fan 6040 props, although the 5030 clear props it comes with are ok. Very stable, fast if required and easy to fly at night, I don't loose orientation as easily because the LEDs work awesome. The built it power distribution board is easy to work out. The motor mounting is a little confusing, you put it all together first or you can't slot the feet in later. Drill the mounting brackets a little bigger and use longer screws, but not too long so as to spear the motor windings.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I doubt anybody could complain about this frame. Using KK2 controller with firmware by Steveis. Baby beast 2206 motors and 12a afro speedy combo pack. Turnigy 3 cell 1400 mha battery and gem fan 6040 props, although the 5030 clear props it comes with are ok. Very stable, fast if required and easy to fly at night, I don't loose orientation as easily because the LEDs work awesome. The built it power distribution board is easy to work out. The motor mounting is a little confusing, you put it all together first or you can't slot the feet in later. Drill the mounting brackets a little bigger and use longer screws, but not too long so as to spear the motor windings.

Ich liebe diesen Rahmen. Sehr gut sind die Leds im dunklen , aber auch im hellen zu sehen.
Auch ist der Rahmen stabiler als man meint. Nach einem rasanten Flip ist er mir
sehr hard aufgeschlagen. Es ist nur eins von den vier Landegestellen gebrochen.
Sie knnen sehr leicht ersetzt werden. Ich habe jetzt den blauen und den orangen Rahmen.
Bin einfach zufrieden.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ich liebe diesen Rahmen. Sehr gut sind die Leds im dunklen , aber auch im hellen zu sehen.
Auch ist der Rahmen stabiler als man meint. Nach einem rasanten Flip ist er mir
sehr hard aufgeschlagen. Es ist nur eins von den vier Landegestellen gebrochen.
Sie knnen sehr leicht ersetzt werden. Ich habe jetzt den blauen und den orangen Rahmen.
Bin einfach zufrieden.

Customer files
No File Name Download [256]
No File Name Download [356]
No File Name Download [349]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save