Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

HobbyKing Multi-Rotor de control Junta V3.0 (Atmega328 PA)

Generating Links

HobbyKing Multi-Rotor de control Junta V3.0 (Atmega328 PA)

Precio:

Now save ahorra 0,00 € 0,00 €

20,35 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9171000011
¿Envío gratis? ¡Haga clic aquí! aprender más!

Sobre la base de la placa de control KK popular y ya bien apoyado, la tarjeta de control Hobbyking Multi-Rotor está trayendo Multi-Rotor locura de las masas con sus avances en calidad y precio!

La placa de control HobbyKing Multi-Rotor utiliza giroscopios japonés Murata piezoeléctricos que son menos sensibles a las vibraciones que giroscopios tipo SMD y también cuenta con el estado de la técnica de fabricación SMT para asegurar la calidad. Esta placa también utiliza una programable por el usuario Atmega328PA IC.

Especificaciones.
Tamaño: 50.5mm x 50.5mm x 23.5mm
Peso: 14,5 gramos
IC: Atmega328 PA
Gyro: Murata Piezo
Voltaje de entrada: 3.3-5.5V
Señal del receptor: 1520us (4 canales)
Señal de ESC: 1520us


¿Cuál es un tablero de control Multi-Rotor lo preguntas?

El controlador HobbyKing Multi-Rotor es un tablero de control de vuelo para multi-rotor de la aeronave (Tricopters, cuadricóptero, Hexcopters). Su objetivo es estabilizar la aeronave durante el vuelo. Para ello se necesita la señal de los tres en los giroscopios de mesa (balance, cabeceo y guiñada) a continuación, pasa la señal a la Atmega328PA IC. La unidad Atmega328PA IC procesa estas señales según la usuarios de software instalado y pasa las señales de control a los controladores electrónicos de velocidad instalados (CES). Estas señales instruyen a los CES para hacer ajustes precisos en la velocidad de rotación de motores que a su vez estabiliza su embarcación multi-rotor.

La placa de control HobbyKing Multi-Rotor también utiliza señales de su receptor sistemas de radio (Rx) y pasa estas señales al IC Atmega328PA través de las entradas ail, ele, Thr y Rud. Una vez que esta información ha sido procesado el IC enviará señales que varían de los CES que a su vez ajustar la velocidad de rotación de cada motor para inducir vuelo controlado (arriba, abajo, hacia atrás, hacia delante, izquierda, derecha, guiñada).

Nota: Un manual de usuario está disponible en la ficha archivos.
* Las regalías pagadas por cada unidad vendida a Rolf, el diseñador original KK.

  • Xcopter Scratch Built Stable Quadcopter
  • Xcopter Scratch Built Stable Quadcopter
  • Xcopter Scratch Built Stable Quadcopter
  • Xcopter Scratch Built Stable Quadcopter
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Doug | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 26, 2015

Got this board and it will not work on my quad. Tried everything and it will not even flash successfully. Board is dead. No lights flash. Nothing. Tried my buddy's board and all works good he tried this board and its dead. I always get the broken one. Just my luck.

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 04, 2015

I recommend the Flash tool for this. I know that they say it comes set up for a Quad but mine did not. I had to buy the kk2 board because when I went to buy the flash tool it was not in stock. I'm not going to complain because once i receive my flash tool Ill have to build another multirotor... :) o well...

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 22, 2015

Gut fr den Einstieg, jedoch ohne Erfahrung wo man wie drehen muss eher schwierig. Durch das Brett mit dem Display leicht zu toppen.

Narrow Boat | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 10, 2015

Easy to use basic control board works well as it comes.
Can be set up easily using the gyro adjuster pots without needing any fancy gear.
Only suitable for x copter unless you have a lead and PC software to change over to other configuration but for my first multirota its perfect.

Roshan | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 11, 2014

Great starter FC for your first quad. Definitely is limited in functions but you won't find anything this cheap. Annoying to configure and load firmware but otherwise it everything works out fine. Trimming the PID's can be frustrating but that is the case with any FC. Just watch some videos and try understanding it. The manual potentiometers are GREAT for first timers because you will be constantly changing them before getting it just right. Overall, I am glad this was my first FC. Taught me a lot and in the end I was pretty 'locked in' and happy with it. I have since moved up to Multiwii's and Naze32's but I would definitely recommend this as a first.

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 26, 2014

Good board easy to programm with USBasp

pilotoheavy | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 25, 2014

placa justeta. tal i com ve de fabrica es per quad .
funciona mes o menys be. pero li falta fiabilitat.
economica pero justeta.

Comode | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 10, 2014

1 crown, because the one i got doesn't work at all...
Moreover, there's a large amount of soldering flux left on the board and all soldering points are oxydized.
I didn't (and won't) contact the support center for a so cheap item so i ordered a new one to try again. Hope the next one will work !

Jared | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 18, 2014

The board will appear to not work when you get it. You have to hold your throttle all the way down and to the right for 5 seconds to get the board to "arm". A little led light will come on and everything works after that

Gusgus | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 14, 2014

Looks like a good board but i brought it for a tricopter and couldnt find any way to make it work looks like it would be perfect for a quad but now that i have the kk 2 board i wouldnt look at any thing else

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 9
Archivos de clientes
HK User Manual Download [506]
Muj Xcopter Download [2695]
KK Multicopter Manual Download [883]
No File Name Download [429]
Nützliche Links Download [58]
HK FC V3.0 User Manual Download [506]
KK Multicopter ISP pinout Download [768]
No File Name Download [506]
No File Name Download [2]
Flashing your Multicopter Controller Boa Download [1973]
  1. 1
  2. 2
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!