Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

HobbyKing ladrillo rojo 20A ESC

HobbyKing ladrillo rojo 20A ESC

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
33 g
SKU:
RB20A-ESC
Descripción
del

Los CES HobbyKing Red Brick suele ganar el primer lugar por el estilo, a pesar de que tomarán los mejores puntos para la simplicidad y fiabilidad. Con un conjunto básico de programación cuenta con estas CES son una solución perfecta para aquellos que buscan un controlador básico pero robusto velocidad.

Los CES Red Brick han sido diseñados con la disipación de calor en mente. con disipadores de calor gemelas, el CES ladrillo rojo son ligeramente más grandes que muchos CES en su clase, sin embargo este compromiso de tamaño tiene por objeto ayudar a eliminar los problemas asociados con el sobrecalentamiento.

Especificaciones.
Amps max: 25A
UBEC: 5v / 2A
Las células: 2 ~ 3S Lipo
Tamaño: 48 mm x 26 mm 8 mm
Peso: 20 g (Alambres Inc)

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    RB20A-ESC
  • Brand:
    N/A
  • Capacidad ( mAh )
    No
  • Peso ( g)
    33.00
  • Longitud:
    190.00
  • Ancho:
    9.00
  • Altura
    70.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very cheap and reliable, local hobby shop are quite expensive and packing also nice TQ HB
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Juz mialem kiedys regulator tej firmy i byl okej, dlatego znowu zdecydowalem sie na ta firme. Lubie tanie i dobre regulatory i nie tylko.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This HobbyKing Red Brick 20A ESC matches the description and good tunes. Settings must be used for instruction and follow the recommendations. Recommend a good regulator.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Preis / Leistung unschlagbar
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this is a very simple and easy to use ESC.

i have one another Red Brick 30A ESC, and working properly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These ESCs are what you would expect. They are very basic and easy to use. They only downside is that I couldn't get them to work with a programming board. Also like everything from hobbyking it is hit or miss as far as working. 3 out of 4 that I ordered worked fine. Either order nicer turnigy ESCs or order an extra one of these just to ensure that you will have enough in case you get a dud.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
You can't even begin to guess the potential of this ESC with its weak stock firmware : do yourself a favor and re flash it with SimonK firmware. Here is a quick 'how-to' guide * How to flash (certain) Atmega based ESCs with SimonK firmware : You will need : 1- USBasp AVR Programming Device for ATMEL processors (PRODUCT *ID: 381000147) 2- Atmega Socket Firmware Flashing Tool (PRODUCT *ID: 332000007) 3- Download the kkmulticopterflashtool (it has the most recent versions of SimonK firmware) 4- Do a google search for SimonK firmware (you will find a spreadsheet in docs.google with all the compatible ESCs with photos !) 5- Remove the heatshrink wrap from your ESC. Make sure your ESC is the same as in the photo. 6- Align pin 1 dot of the socket flashing tool with the pin 1 dot of the Atmega chip. Press firmly and upload the firmware. Kkflashtool will tell you if the firmware has been successfully upgraded. Make sure you choose the firmware with the bootloader : you can then re flash your ESCs by using the 3 pin servo plug with a ESC USB programming tool (PRODUCT *ID: 9171000243) without having to remove the heatshrink. 7- Get some transparent heatshrink tubing (20 mm) from here.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works great so far, I've run it 36hrs straight at 12 volts and 12 amps, barely warm even with almost no airflow.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Simple to use ESC, does exactly what I need it to do. Quality is good and works well in my swamp dawg
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A very nice, small, light, and economical ESC for people that do not require special frills. This is an ideal choice for any application for up to 225W. I consider this ESC to be the perfect park flyer (and larger) choice.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
No File Name download now [167kb]

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.