Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Hobbyking inalámbrica de batería Rastreador w / Free 869.5Mhz batería

Generating Links

Hobbyking inalámbrica de batería Rastreador w / Free 869.5Mhz batería

Precio:

Now save ahorra 0,00 € 0,00 €

28,81 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
HK-Traker8695
¿Envío gratis? ¡Haga clic aquí! aprender más!
¿Te gustaría poder saber su voltaje de la batería Lipo, mientras que usted está volando?
¿Quieres ser capaz de saber con precisión cuando el paquete está a punto de caída de tensión?

La Nueva - y - Mejora Hobbyking rastreador de batería inalámbrica supervisa su LiPoly por el tapón de carga y envía una señal al receptor. Si una de sus células caer por debajo de 3.6v el LED para esa celda se volverá rojo. Una vez que la celda cae por debajo de 3v el LED parpadea y el zumbador de advertencia emitirá un pitido, para indicarle que debe aterrizar tan pronto como sea posible.
Esta unidad es también una gran manera de encontrar las mismas baterías caída de tensión en gran medida bajo carga.
El transmisor opera en la banda de FM y 869.5Mhz puede monitorear 2S a 6S baterías.

Especulación.
Transmisor Peso: 7 g
Peso del receptor: 35g (esta es la parte que tenga en su bolsillo)
la distancia de la señal: Alrededor 300-400mtr
Batería: 7.4V / célula 2 (Incluido)
Uso;
Asegúrese de que el receptor de mano está activado y se ha seleccionado el número de células en primer lugar. Una vez hecho esto, a continuación, conectar el transmisor dentro del avión a la bujía de baterías equilibrio. Si no lo hace en este orden, la lectura será incorrecta.
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

giovanni | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 22, 2012

prejudice to the product I purchased and a great product that meets my visa application quality 'money. shame that you can not adjust the potentiometers so that' have a precision of the receiver when the battery discharge

johnno | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 27, 2012

A fantastic product! I have used it in both an RC boat and a touring car. The boat uses a large brushless motor that can use up to 80Amps and the monitor was fantastic at not only showing the current voltage of the cells but under acceleration it was also useful to monitor the overall health of the individual cells in the lipo pack, showing clearly that a couple of the cells where dropping voltage compared to the rest of the pack.

Cliente | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 24, 2011

I purchased this peace of garbage with great expectations, well at least with the expetation that it would work for more than 10 seconds. It seemed to work out of the box when i initaly tested it, put it away for a couple of weeks when i went to install it the reciever was completly dead. I maid sure it had enugh voltage , charged it to capasity and no love, the antenna broke off from the base of the unit and DEAD! save your money

Anthony | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 12, 2010

Unfortunately, everyone is right. This is a terrible product. I ordered it with the hope that the reviewers just got a dud unit. Well, only 2 out of the 6 cell LEDs work. Surely the factory can have better quality control than this! HK, ditch this product.

isaac509 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 07, 2010

This is really a terrible product. Not only were half the LED's burned out on the reciever when we got it, the transmitter seems to draw a lot of power from the battery.

I think you need to spend more for a decent solution.

Sunwalker | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 03, 2010

Funktionier ganz gut etwas mehr reichweite wrde nicht schaden

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 30, 2009

Super geniale Hilfe beim Modellflug dieses kleine gadget ist echt der Hammer

Valek | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 13, 2009

On first times beeps occur after 2-3 minutes of flight (usual flight time for my plane is 10-11 minute). And now alarm and beeps starts immediately after fully charged battery connection. Fully unusable. Not recommended.

| Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 18, 2009

I would appreciate a LiFe version ! I guess the potentiometers are trims for voltage measurement of cells 3 to 6, but it's just a guess, I didn't test it.

The channel is selected by jumpers on the transmitter and the receiver. For the 869.5 MHz I bought, the jumpers J1 and J2 are closed, J3 is open. 3 stars only because it starts beeping when one cell drops under 3.6V, so it beeps almost all the time. Louder beeps that occur under 3V are enough.

TERRY270 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 11, 2009

Excellent product. Using a 2x3s>6s splitter you can monitor 2 x 3s batteries in either parrallel or series. I am personally using HK's TWIN PACK CHARGE LEAD to monitor 2 3s packs in parallel for the same price as a splitter - simply don't use the heavy guage red & black > deans connector for this application.

  1. 1
  2. 2
  3. 3
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!