New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Hobbyking inalámbrica de batería Rastreador w / 869Mhz Batería libre

Hobbyking inalámbrica de batería Rastreador w / 869Mhz Batería libre

Discontinued Product

Please continue searching for a similar product.
Peso:
149 g
SKU:
HK-Traker869
WANT FREE SHIPPING? Click here to find out more!
¿Te gustaría poder saber su voltaje de la batería Lipo, mientras que usted está volando?
¿Quieres ser capaz de saber con precisión cuando el paquete está a punto de caída de tensión?

La Nueva - y - Mejora Hobbyking rastreador de batería inalámbrica supervisa su LiPoly por el tapón de carga y envía una señal al receptor. Si una de sus células caer por debajo de 3.6v el LED para esa celda se volverá rojo. Una vez que la celda cae por debajo de 3v el LED parpadea y el zumbador de advertencia emitirá un pitido, para indicarle que debe aterrizar tan pronto como sea posible.
Esta unidad es también una gran manera de encontrar las mismas baterías caída de tensión en gran medida bajo carga.
El transmisor opera en la banda de FM y 869.0Mhz puede monitorear 2S a 6S baterías.

Especulación.
Transmisor Peso: 7 g
Peso del receptor: 35g (esta es la parte que tenga en su bolsillo)
la distancia de la señal: Alrededor 300-400mtr
Batería: 7.4V / célula 2 (Incluido)

Uso;
Asegúrese de que el receptor de mano está activado y se ha seleccionado el número de células en primer lugar. Una vez hecho esto, a continuación, conectar el transmisor dentro del avión a la bujía de baterías equilibrio. Si no lo hace en este orden, la lectura será incorrecta.
  • SKU (Número de Referencia) HK-Traker869
  • Brand HobbyKing
  • Capacidad ( mAh ) -
  • Peso ( g) 149.00
  • Longitud 0.00
  • Ancho 0.00
  • Altura 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is not a good product. Mine works as long as the transmitter is less than one meter from the receiver. The transmitter label is pasted on backwards, reversing + and - indications. The receiver battery is a 1S lipo and I charged it first. There is nothing written on it so I charged it at .1 A. I would give it zero stars but that is not a choice.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is not a good product. Mine works as long as the transmitter is less than one meter from the receiver. The transmitter label is pasted on backwards, reversing + and - indications. The receiver battery is a 1S lipo and I charged it first. There is nothing written on it so I charged it at .1 A. I would give it zero stars but that is not a choice.

Not recommended. Beeps all the time when throttle is on. Really unuseable...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not recommended. Beeps all the time when throttle is on. Really unuseable...

Con un motor de alto consumo te avisa de bateria baja con normalidad ya que si el voltaje de la bateria baja por debajo del minimo que opera el aparato salta la alarma pero al cortar algo de gas para la alarma, es muy util cuando vuelas cerca y con un avion poco planeador.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Con un motor de alto consumo te avisa de bateria baja con normalidad ya que si el voltaje de la bateria baja por debajo del minimo que opera el aparato salta la alarma pero al cortar algo de gas para la alarma, es muy util cuando vuelas cerca y con un avion poco planeador.

Works great!

Starts beeping intermittantly when my battery is at about 50%, beeps continuously about 1 minute before my low voltage cutoff happens. Very good investment!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great!

Starts beeping intermittantly when my battery is at about 50%, beeps continuously about 1 minute before my low voltage cutoff happens. Very good investment!

Bought two of this and use them in my twin motor catamaran with two 4S 5000mah Turnigy li-pos and this "tool" is very helpful to protekt your cells.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought two of this and use them in my twin motor catamaran with two 4S 5000mah Turnigy li-pos and this "tool" is very helpful to protekt your cells.

Nice product.The only thing that wasn't good was the bad battery that was included.I use it with another battery which is external cause it is bigger.No reply to my email at all and no spare battery to buy extra for this item...Anyway... if you are lucky and your battery is ok , then this product is fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice product.The only thing that wasn't good was the bad battery that was included.I use it with another battery which is external cause it is bigger.No reply to my email at all and no spare battery to buy extra for this item...Anyway... if you are lucky and your battery is ok , then this product is fine.

It works butt it beeps earlier then what i want.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It works butt it beeps earlier then what i want.

First, there was only partially function. Then i have found out, that the connector case-side makes not sure connection, it seem's to bee a little smaller with the pins. So i have soldered an other one (f)-JST, and since there, it's perfect!

I also have mounted a little 2S-Buzzer for the internal Lipo on top of the case.

This is a absolutly perfect tool, and i'dont want to miss them - and it's also fantastical cheap!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First, there was only partially function. Then i have found out, that the connector case-side makes not sure connection, it seem's to bee a little smaller with the pins. So i have soldered an other one (f)-JST, and since there, it's perfect!

I also have mounted a little 2S-Buzzer for the internal Lipo on top of the case.

This is a absolutly perfect tool, and i'dont want to miss them - and it's also fantastical cheap!

This item is working exactly the way it is described. A very good solution for my receiver lipos that power my Turnigy Power Unit for my bigger planes instead of placing a volt watch that needs another channel on the receiver.

The only con about this unit is wether shall I be able to find a spare receiver lipo with the same specs???? Thanks HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This item is working exactly the way it is described. A very good solution for my receiver lipos that power my Turnigy Power Unit for my bigger planes instead of placing a volt watch that needs another channel on the receiver.

The only con about this unit is wether shall I be able to find a spare receiver lipo with the same specs???? Thanks HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

, .. . , ,

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!