Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

HobbyKing X-coche sin escobillas de alimentación del sistema 3000KV / 45A

Generating Links

HobbyKing X-coche sin escobillas de alimentación del sistema 3000KV / 45A

Precio:

Now save ahorra 0,00 € 0,00 €

67,14 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9164000006
¿Envío gratis? ¡Haga clic aquí! aprender más!

Un sistema sin escobillas muy potente para cualquier 1/10 o 1/12 camión escala, coche o con errores, la serie HobbyKing X-Car ofrece un alto rendimiento y gran valor en un paquete fácil de usar combinado. Con este sistema, el motor y el ESC se emparejan para un mejor rendimiento que le ahorra la molestia de la elección de los componentes por separado a sí mismo. Simplemente soldar en sus conectores favoritos, instalar un engranaje de piñón y su listo para funcionar!

caracteristicas:
ESC

• Respuesta mejorada del acelerador, la linealidad del acelerador precisa, excelente aceleración y frenos fuertes
• Programable con la tarjeta de programación X-Car Hobbyking para realizar ajustes. (incluido)
• Detecta automáticamente el número de células dentro de la batería.
• Características de protección múltiples: Protección de baja tensión de corte, protección del sobrecalentamiento, protección contra la pérdida de señal del acelerador y el motor bloqueados protección.
• Compatible con NOVAK, PRL y motor sin escobillas ORION Sensored.
Motor
• Alta calidad de acabado anodizado CNC.
• temporización ajustable permite un ajuste fino.
• El funcionamiento Sensored asegura arranques suaves y aceleración.
• orificios de refrigeración grande para mantener la temperatura baja.
• El funcionamiento de alta eficiencia.

ESC Especificaciones:
Corriente continua: 45A
Burst actual: 190A
Resistencia: 0.0010ohm
Coche conveniente: 1/10, 1/12 y fuera de carretera
Batería: 2-3 células Lipo (5-9 células de Ni-xx)
BEC de salida: modo de conmutación / 2A 6V incorporado
Tipo de motor: los motores sin escobillas Sensorless y sensored
Modo de servicio: sólo hacia adelante o hacia adelante con marcha atrás (modo programable por el usuario)
Tamaño: 42 x 28 x 36 mm
Peso: 78g

Especificaciones del motor:
Modelo: 3650 Sensored
KV: 3000
Escala: 1/10, 1/12
Activa: 11,5 toneladas
Peso: 171 g
Diámetro: 36 mm
Longitud: 52,5 mm
Diámetro del eje: 3,17 mm

incluye:
45A sin sensor / Sensored sin escobillas CES
3650 de 11,5 toneladas (3000Kv) de motor sin escobillas
Tarjeta de programación Hobbyking X-Car
cable de sensor

  • Kv (rpm / v) 3000.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • Hobbyking X-Car Brushless Power System
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

cascas | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 21, 2015

Awesome little power package very very happy with it. It has tons and tons of power. Installed mine in a 1/10 buggy and it outperforms the Nitro hands down super happy with my purchase would definitely buy again. I would recommend this system 2ne1

Breck | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 14, 2015

Just put this unit in my old Rustler. Very easy install, very easy to program. Stock gearing. I have run it on a 6 cell NiMH and a 7 cell NiMH. Very smooth acceleration but not as fast as I expected out of the box. I have just programmed the esc for 3.2v cut off and am charging a 3s lipo. With both NiMH batteries there was zero heat on the motor even after running it hard for the battery duration. I think that the gearing may need adjustment for speed when using NiMH, but it may be perfect for a 3s lipoly. Very pleased with this unit.

Dr_Doernander | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 03, 2015

This setup is a very goof value for the money. I use it in a 1/10 scale monster truck and whoaa - it runs extremely well and fast. Because of the sensor there is no stuttering an low speeds. Be sure to read the manual carefully because in sensor mode it is very important to use correct polarity on the motor wires.

kozobera | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 08, 2014

Replace Strada XB EVO 1:10 Buggy BER and brushed motor fed by Turnigy 4000mAh 2S 30C LiPo and works perfectly. Prior change the brushed motor heats 100C and even more. Now I am experiencing maximum 40C with more power.

bepilot | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 28, 2013

Works as it should on my Tamiya TT01 as wannabee drifter, on a 2S 5300mAh - runs at least 4 times a month since nearly a year now.
Initialisation at powering-up and reverse are sometimes erratic, but this could be due to my old analogic transmitter... Hit the overheat protection once, but was running on a sun-heated 52C carpet which was extremely grippy - my other colleagues didn't have those problems with their more high-end equipment.

the nerling | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 15, 2013

PERFECT combo for a nitro buggy conversion with a 3s great speed and tourque with my gearing
15t pinion 44t spur on hsp warhead using a 3s 2100 lipo good run times
if you need a brushless setup get this one

nick | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 06, 2013

Good on 2s lipo use this in my drift car nice and smooth only problem the motor can only be run on 2s lipo it dose not say on the web site but says in the manual have run on 3s but only runs for 5 mins then the power cuts to half don't no if that is because the motor not designed for 3s or its the esc overall verry good for the money on 2s

CHATCHAIAPI | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 29, 2013

i installed this set on GMADE R1 and run both 2s and 3s. motor and esc work very well only warm even at 100pcnt throttle. ESC very easy to program via program card and it come with full instruction manual.

crashd | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 08, 2013

Swapped out the old brushed system in my losi DT. MUCH better. Used stock main gear but put a 23t pinion on the motor. So far so good, more updates after racing (if it doesn't snow this weekend). The instructions read in fairly fluent chinglish, and are pretty understandable. I didn't need to play with the programming card as the esc defaults seem fine - again, after tweeking will update further.The motor leads could be a bit longer, but hey, its not a hobby unless you can solder bullet plugs and make extension wires. For under 70 bucks am quite happy with this.

felipe | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 01, 2012

Ive bought this to use with my Tamiya TB-01. The combo works great, cold and fast.
Recently Id swapped chassis, and installed the combo in my new Tamiya XV-01 PRO kit. The wiring, both sensor and A-B-C wires supplied with this combo are about 100mm in lenght which is about half the lenght needed for my new Tamiya kit.
If you are planning to run the same system, I recommend you to check out the wiring page at HK and get a 14AWG wiring/connectors and also the 200mm brushless sensor cable.

  1. 1
  2. 2
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!