Estados Unidos
Shipped From:
  • United States (US)

550mm Marco HobbyKing X550 fibra de vidrio Quadcopter

550mm Marco HobbyKing X550 fibra...

El HobbyKing X550 es un marco quadcopter de brazos articulados de alta calidad que ofrece una gran apariencia y el rendimiento a un precio que no puede ser mejor! Construido a partir de peso ligero de fibra de vidrio todavía rígida y aluminio, el...

Now save guardar 0,00 € 0,00 €

21,65 €

Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!


El HobbyKing X550 es un marco quadcopter de brazos articulados de alta calidad que ofrece una gran apariencia y el rendimiento a un precio que no puede ser mejor! Construido a partir de peso ligero de fibra de vidrio todavía rígida y aluminio, el X550 ofrece una gran combinación de ligereza y resistencia.

Este quad cuenta con brazos que hacen que sea fácil de transportar y almacenar plegado. Los brazos son también dos colores diferentes para la orientación, plata y rojo, por lo que es fácil de mantener su quad volar en la dirección correcta.

Este marco quad también es compatible con una inclinación de la cámara opcional de montaje que permite realizar una amplia variedad de cámaras. (Por favor, ver artículos relacionados a continuación para montaje en cámara opcional)

Ofrecemos una línea completa de productos electrónicos de multi-rotor tales como tablero de control multi-rotor, ESC, motores y mucho más, por lo que nunca ha sido tan fácil y asequible para obtener un quad en el aire!

Todo el hardware necesario está incluido, sólo tiene que añadir su propia electrónica.

Peso: 312g (sólo imagen)
Ancho: 550 mm
Agujeros motor de pernos: anchura 19 mm

tablero de control Multi-Rotor
15 ~ 25A ESC sin escobillas x 4
batería de 2200mAh 3S 1800 ~ LiPoly
28-XX 1100 ~ 1300KV motor sin escobillas x 4
8x4 hélice - giro 2/2 estándar inversa

Nota: Todas las tramas de la serie X HobbyKing se compran directo de fábrica. Hemos trabajado en estrecha colaboración con los ingenieros de la fábrica para garantizar la calidad. Todas las tramas de la serie X son CNC fresado y corte con precisión a diferencia de muchos de los marcos baratos disponibles de Ebay o vendedores chinos que se perforan a mano en las fábricas de baja tecnología. La serie X Hobbyking también cuentan con gruesas placas GF principales para el stength añadido.


Información adicional

  • Contador de la cuchilla:
  • Diámetro X ( pulgadas ):
  • SKU (Número de Referencia)
  • Watt Hora
  • Peso ( g):
  • Longitud:
  • Ancho
  • Altura

Escribir Tu Propia Revisión

Sólo usuarios registrados pueden escribir sus opiniones. Conéctese o regístrese

Excellent job. My order from the East warehouse arrived super quick. All parts were in the box and the frame was as advertised. Easy assembly. Being in the U.S., the postage was very reasonable. Thanks, HK !
Great frame for the money. Fits a KK2 & PDB quite happily. Quality of the plates surprised me, nice clean milling & edges. The aluminium used on the arms is strong yet light, it does deform when you tighten stuff down but I had to seriously torque stuff before they bent. Only disappointments were the arms came scratched quite a bit, the anodizing is very light and doesn't take much to scratch through it. It was missing the 3x25mm bolts, you get what you pay for though.
Really good frame. Had no issues with it. Motors will mount with only 2 bolts. not a lot of room for FPV or camera stuff. Very stable and stiff. Extra width goes along way for stability in a quad, i would say that counts for a lot more than any carbon props will.

Lachko zlozitelny. snad vydrzi
Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good coveringg
The Red/Black does help with orientation but only up to about 100 yards; after that there isn't enough contrast to really tell the orientation. There weren't any instructions or assembly diagrams so it took a while to figure out what screws went where. They need to put an assembly diagram under the files tab. I assembled with a Q-Brain 25Ax4 ESC, unfortunately the area between the legs was just a few mm too small to fit the ESC so there wasnt really a good place to put it. Sturdy and handles some pretty hefty crashes well.
I got this frame recently and it is awsome!
It's strong and very light and the folding feature is awsome, just make sure you tighten the legs a bit and do about half a turn back so you can slide it but it wont be wiggly and loose.

Do note the guide doesn't tell you to use the washers a hole lot of times despite there being enough for any screw you'd be using so do add them each time!

The manual also overlooked the fact that the metal spacers should be placed on each leg bit so keep that in mind as well!

The KK board can fit exactly on top instead of the glass fiber piece you get so that is nice as well!

I would like to see the camera attachement to be stocked in europe as well though.
nice build quality

-good cutting


-extra plastic spacer

-easy to assemble
This frame is quite good value and I am pleased I chose it for my first quad. Like some others, it is a good idea to insert wood blocks in the ends of the arms to prevent them from being crushed by the mounting and motor bolts. The hardware supplied is good and adequate and includes a battery strap. It needs legs mounted on the main frame for landing as after a while or after a heavy landing the arms tend to bend up and have to be straightened periodically.
In this one I use a KK2.1 FC board and SK3 2830 Turnigy Aerodrive motors with 9x4.7 Turnigy props and 30 Amp Turnigy Plush ESCs. I use 2450 and 2650 35C batteries. It also goes OK with 1800 35C batteries.
I cut some rings off a broom handle to insert on the legs as ' landing wheels' just to give it a little more ground clearance.
It is a steady frame and can go like a rocket if you want it to, but is also very docile when required.
To sum up, I am quite happy with this frame.
primer intento de quadcopter
View all reviews
  • HobbyKing X550 Glass Fiber Quadcopter Frame

Upload video

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.