Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

895mm Marco HobbyKing X930 fibra de vidrio Octocopter

Generating Links

895mm Marco HobbyKing X930 fibra de vidrio Octocopter

Precio:

Now save ahorra 30,10 € 30,10 €

Special Price 14,40 € 14,40 €

You save ahorra 30,10 € 30,10 €

Was  44,50 €

Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9171000117
¿Envío gratis? ¡Haga clic aquí! aprender más!

El marco Octocopter HobbyKing X930 es un marco de fibra de vidrio de alta calidad que ofrece tanto a los aspectos estéticos y de rendimiento. Construido a partir de peso ligero pero de fibra de vidrio extremadamente rígido y aluminio, el X930 ofrece una gran combinación de ligereza y resistencia.

Este marco se deriva de nuestros marcos multi-rotor ya populares de la serie "X", que ofrece una construcción similar y el estilo, pero ahora en una configuración octo. Se trata de una exclusiva HobbyKing lo que significa que no encontrará en ningún otro lugar!

La capacidad de elevación adicional de una configuración de octo hace que este marco ideal para llevar las cargas útiles más grandes, como los sistemas de cámaras y otros componentes electrónicos. Esto lo convierte en una plataforma de la cámara excepcional o simplemente un marco multi-rotor muy ágil y potente para la acrobacia!

El X930 cuenta con un grosor de fibra de vidrio de 2 mm bastidor principal muy bien acabado, gruesos brazos de aluminio de 1 mm cuadrado, de alta resistencia extendidos patines de aterrizaje de altura y de vidrio rígida soportes de motor de fibra. Este marco Octocopter es resistente construido y listo para llevar una carga útil en serio!

Ofrecemos una línea completa de productos electrónicos de multi-rotor tales como tablero de control multi-rotor, ESC, motores y mucho más, por lo que nunca ha sido tan fácil y asequible para obtener un avión multi-rotor en el aire!

Se incluye todo el hardware necesario.

Especificaciones:
Ancho: 895mm
Los agujeros de pernos del motor: 16/19 / 25mm
Cuadro Peso: 916g (w / salida de la electrónica)

Necesario:
tablero de control Multi-Rotor
15 ~ 25A Brushless ESC x 8
28-XX / 35-XX motor sin escobillas x 8
10 ~ 12 pulgadas hélice - 4 estándar de rotación / 4 inversa
2650 LiPoly ~ 3 ~ 3600mAh 4S
Su propia 4 canales transmisor / receptor

  • HK X930 Octocopter
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

JahNix | Comprador verificado

  • Overall
  • Quality
  • Value

Cheap - But Nasty

Oct 08, 2021

I impulsed bought this one night because it was heavily reduced. I think the only good thing about it is the aluminum arms. The glass fibre cut outs dont fit together well and even with the arms on, vibrates heavily. The price I paid I'm happy with the aluminum arms (I can 3D print a new base/frame etc) but this is a bit to basic project kit.

JoJo | Comprador verificado

  • Overall
  • Quality
  • Value

Excellent

Aug 19, 2021

good Quality and Price

Polverari | Comprador verificado

  • Overall
  • Quality
  • Value

Octocopter X930

May 05, 2021

Substitui os braços de aluminio por fibra de vidro e ficou mais leve.
Facil de montar. Bom para arrumação de fios e placas e tambem um bom suporte para as baterias.

Dave54 | Comprador verificado

  • Overall
  • Quality
  • Value

Octicopter frame

Feb 28, 2021

Very well made all cutting is exact. Goes together very easily

jaybay | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 01, 2016

excellent frame let down by the lack of a second deck but that said its very simple to achieve with the use of a few stand-offs and for example a glassfibre battery carrier wich is what i used but for the pricwe EXCELLENT VALUE FOR MONEY WELL THOUGHT OUT VERY LIGHT FOR ITS SIZE BUT IT REALLY IS A TRUE BUILDERS KIT AND WHILST A BEGINER COULD ASSEMLE IT TOO MUCH IS LEFT TO THE BUILDER TO WORK OUT FOR EXAMPLE MOTOR AND PROP SET UP AND THE SECOND DECK ALL IN ALL EXCELLENT IVE SEEN THEM FLOWN WITH ANYTHING FROM A 2212 MOTOR UPTO A E600 FROM DJI

joe19934 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 26, 2016

Ok where to start.....
Assembly - Instruction lol there are none unless you call a picture of the parts instruction.
It is pretty much straight forward however.
The fit is horrible! plan on using some epoxy and some extra fasteners on some area's.
I read on the International site that the motor mounts are the worst part.
I will use the stock ones but have found aluminum ones on EBay for like $35 for a set of 8
The directions show the mounts on top of the arms but the video and photos here have them mounted below..... I guess its preference but I may mount my mounts on the bottom.
I'm waiting on motors I plan on using Emax XA2212 820KV w/ 10or 11'' props.... I am going to try 2 EMAX 4in1 ESC's but may switch to individual ones if the don't work well.
I'll let you know how it flys when its all together... Oh and I have a NAZA Lite Flashed w/ V2 for a Flight Controller

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 19, 2015

WOW Riesig

Verarbeitung naja - ein bisschen hier und da nachschleifen musste schon sein

blenderking | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 07, 2014

It's a cool frame, I'm pretty sure the only octocopter frame on hobbyking. The only problem I have with it is that the legs don't actually fit into the frame. I had to sand them down and they still barely fit in. Then on the bottom of the frame the little skid things are so lose they fall off every other time I pick the thing up. It wasn't a hard fix, some hot glue did the job as the only hard force they will be experiencing is when they get pushed INTO the frame, not out, when I land but it was rather annoying to have to sand and hot glue the thing together. Don't let this turn you off it, it's a great frame and I would buy it again, it's only just shy of brilliant!

Christopher | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 30, 2014

Incredible frame for the price! I have about 10 flights now and here is what I have seen: motor mounts need reinforcing....I built my own by tracing the original mounts on aluminum plating and cut out...soo much better. The originals began vibrating and flexing. I could see cracks forming so better safe then sorry! While assembling the frame I wish I had used glue as well because skids and legs are beginning to loosen. The skids IMO need to be wider and longer....if the ground isn't perfectly level the copter can easily tilt over onto the props. I'm planning some more mods in the near future. Overall, great for what you are paying....just watch out on those motor mounts!!

Doobieman | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 09, 2014

This is an outstanding kit frame for the price. It's also HUGE! I'm pretty sure this won't fit in the trunk of my Audi without some dis-assembly (it's a small opening). It's slightly under 35 1/4 inches from motor center to motor center, or exactly 895mm. It's a bit difficult to assemble if you're mounting any extra carry gear (such as a camera/gimbal mount), only because 4 of the screws will require some finessing to get into place and tighten. This is something that should be addressed in a redesign. 5mm would make all the difference here. The landing gear seems a bit fragile, as do *all* low priced landing gear. I'd say there is enough clearance for a full sized DSLR, but my Nex 5t or n will fit without any issues. It might be time to get a van...

  1. 1
  2. 2
Archivos de clientes
Turnigy H.A.L. Gimbal mounted Download [1801]
Turnigy H.A.L Gimbal mounted 2 Download [2893]
Octocopter + KK2.1 Download [1896]
2 x 3s 2200 25c Lipo's Download [1823]
QBrain ESC x 2 Download [1454]
Octocopter motor with 8x45 prop Download [1481]
Sandwich box cover Download [1671]
Basic Rig Download [1326]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios