Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Nube HobbyKing® ™ Surfer EPO FPV Planeador w / Flaps 2000mm (P & P)

Generating Links

Nube HobbyKing® ™ Surfer EPO FPV Planeador w / Flaps 2000mm (P & P)

Precio:

Now save ahorra 0,00 € 0,00 €

112,95 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9457000006-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

Sobre la base de la capacidad ya establecida de nuestro propósito construido cielo del ojo como un planeador FPV, nuestros diseñadores han sacado todas las paradas para mejorar las cualidades de vuelo del original y la entrega de las mercancías con el Cloud Surfer. La nueva configuración de cola en T permite mejorar la estabilidad y la capacidad de respuesta de control de vuelo, siendo ambos preocupaciones primarias con cualquier plataforma de la cámara FPV especialmente en la lenta velocidad de envolvente de vuelo, y la nueva imagen se ha hecho aún más distintiva por su elegante acabado en gris.

Este es un modelo grande que cuenta con una enorme envergadura de 2 metros, pero dicho esto, no hay necesidad de preocuparse de conseguir el Cloud Surfer a su zona de vuelo. Cuenta con un sistema de ensamblaje de ala plug-in de dos piezas que le permite ser transportado en casi cualquier vehículo de motor y una vez en su destino, es fácil y rápido de montar.

La escotilla dosel magnética proporciona un fácil acceso a la batería, el receptor y la cámara sin la sensación llena zona. Seis pesados ​​mini-deber de servo son pre-instalado, como es el potente motor sin escobillas fuera del corredor y ESC.

moscas más grandes mejor y esto es especialmente cierto con las plataformas FPV planeador y usted puede apostar que el Cloud Surfer sin duda encaja a la perfección aquí. Una enorme área del ala junto con solapas preinstalados asegura un vuelo estable y casi un-stallable que es exactamente lo que busca como piloto FPV.

Con el Cloud Surfer conseguir "allá arriba" es fácil con su potente outrunner 35 mm sin escobillas y 8 pulgadas prop. Combinados que proporcionan el Cloud Surfer con una tasa de ascenso excelente y una vez que llegue a su altitud deseada es simplemente un caso de dar marcha atrás a su acelerador y estableciéndose por alguna primer vuelo sin motor FPV tasa.

Construcción robusta de espuma EPO es fácil de montar debido a la cuentan las partes mínimas y la cúpula frontal transparente da una visión hacia delante sin restricciones para su acción y / o la cámara FPV.

El Cloud Surfer es todo lo que busca en un gran escala y construido plataforma FPV / cámara. Es fácil de construir y configurar, fácil de volar y, sobre todo, una excelente relación calidad-precio.

caracteristicas:
• Construcción resistente EPO
• Formato de Plug and Fly, Basta con añadir una batería y Reciever!
• gran tamaño Ideal para Flying estable en una variedad de condiciones climáticas
• Nariz único montado en la cámara domo transparente
• configuración única cola en T
• Rueda de aterrizaje pre-instaladas
• Flaps PREINSTALDO
• Canopy magnética grande
• Instalaciones de la 2pc del ala para facilitar el transporte
• Potente 35mm sin escobillas Outrunner
• Ampliación de capacidad de carga útil
• Tubo de ala grande CF

Especificaciones:
Envergadura: 2000mm
Longitud: 1100mm
Peso: 1400g
Área de ala: 46.3dm2
Carga alar: 29,2 g / dm2
Servo: 6 x 17g Mini
ESC: 30A w / BEC
Motor: 3536 sin escobillas Outrunner 900kv
Objeto: 8 "x 6"

Todas las instrucciones de hardware y Incluyó

Se requiere:
Su propio canal 6 TX / RX
2200mAh 3S Lipo batería (min)
Pegamento o espuma de espuma de CA seguro y Kicker

  • DIY Parts for the HK Cloud Surfer FPV
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Zsolt | Comprador verificado

  • Overall
  • Quality
  • Value

The best you can get

Mar 15, 2018

Pros:
- easy to put together
- Tons of space to fit all your gear, batteries, etc
- Flies amazing, floats thanks to its flaps, if configured properly
Cons:
- foam is soft and flimsy - careful when putting it together. I simply laminated it in a single piece ;)

Henrique | Comprador verificado

  • Overall
  • Quality
  • Value

NOT GOOD for beginners

Nov 23, 2017

I'm a beginner and this plane give me some headaches that I would not recommend if you're a beginner. Foam is very cheap and flimsy and breaks easily. If you're experienced and already have a lot of FPV stuff, I'd say go for it.

Jerry | Comprador verificado

  • Overall
  • Quality
  • Value

Nice Sailplane, Powerful motor, Long flight times with 3.3hr battery nice aileron/elevator cruising banking.. flaps work great.. EPO is EPO..

Sep 11, 2017

The plane flies great! With a 3.3amp hr battery this bird can fly for an 45 minutes or more!
It looks great in the air. When you build it, make sure you buy yourself a balance tool and locate the battery in it's proper spot because an airplane that is tail heavt only flies once.
A member at the R/C club I belong to balanced my CloudSurfer for me. If you are using the 3.3amp turnigy lipo sold here the battery should mount all the way up front. Also if you don't have any fpv equipment during the maiden flight.. like me you will need to add lead to the nose to balance it out. The assembly directions for configuring the r/c channels is wrong for anyone who flies USA mode 2. The elevator and alerons are reveresed. It's no biggie. I also used channel 7 for the flaps and mixed channel 6 so I can use a knob on my radio to tweek the flaps. It really flies well.. You can easily steer the bird with alierons only.. I have not had to use the rudder. The wings have stayed in place even during flights with hard banking. My last flight I did run into an issue. I banked hard into a thermal... cut the motor, banked and gave the elevator some down.. went into a dive as planned.. but I got too close to the top of the corn in a corn field, paniced.. accelarated too hard whild banking and climbing away.. I ended up plowing into the corn field. The only damage was the top of the fusealage wing assembly area. This are is the Cloudsurfers weak spot. The crash was not hard enough to damage the fuesalge, but the wings on impact ripped out of the fuesalage. The EPO glue I purchased from Hobbyking appears to be great... I'll fly it again next Saturday.
It is a fun plane to fly.

gouret | Comprador verificado

  • Overall
  • Quality
  • Value

cloudsurfer

Mar 17, 2017

recu le mien sans problème, assemblage trés facile ,j ai installé une batterie graphene 3S 4000 MAH pour le CG, qualité de vol très simple et calme, je dirais meme qu'il est gratteur comme un planeur ,premier vol avec cette batterie en temps calme de 40 minutes, je l'utilise en fpv avec une carte APM , le seul problème rencontré est l'hélice qui est mal équilibrée ,,bon vol a tous

Disapointed | Comprador verificado

  • Overall
  • Quality
  • Value

Purchased 07-03-2017 - reviec

Mar 07, 2017

What can I say, I purchased this plane last week and the quality is so so bad and worst of all there are NO SPARES AVAILABLE FOR THIS MODEL.
1. The wings dont fit together flushly.
2. The servo holes are too big on the main wing making it a very sloppy movement.
3. The servo in the elevator holes are too small for the control rod.
The screws to attached the clevises are about 10 cm too long and protrude from the top of all the wings, they are also very sharp.
4. The rudder servo nearly rips the tail off where the throw is way to much and bends the rod to 35 degrees.
5. The foam is very bad quality and as the wings are only held together with friction, the foam on the wings is very easily dented.
6. The control surfaces are warped and do not line up properly with the wing.
7. The elevator section when screwed on is slightly twisted and does not sit straight with the fuselage.
8. This model is grey and the paint peels off very easily.
9. the horns and clevises are really small and flimsy and will very easily break with any kind of pressure.
10, its takes more that 1 x 2200 as reco by HK to balance this plane, not sure which clueless person wrote that!

BE WARNED.....


Sergio | Comprador verificado

  • Overall
  • Quality
  • Value

query

Nov 14, 2016

HK sell the replacement for the dome?

Sergio | Comprador verificado

  • Overall
  • Quality
  • Value

query

Nov 14, 2016

HK sell the replacement for the dome?

phamilton | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 15, 2016

Pros:
- VERY easy to put together
- Tons of space to fit all your gear
- Flies amazing, floats even in the crapiest air

Cons:
- foam is soft and flimsy - careful when putting it together
- CAREFUL with the CG... first flight was slightly back and landing was a nightmare

If the foam were of better quality, this plane would get my 5 crowns!

Gregory | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 07, 2016

Great plane just make sure you have the CG in the correct spot I needed to get a 5000mA battery to pull the CG forward. Once you get the wings on they are hard to get back off, not made to be removed after each flight for transport so you you might want to have a truck or large SUV to transport this plane to a field. Very stable in the air when you get the CG correct.

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 05, 2016

de petits ajustements au niveau du jeu dans les tringles. mettre un CG ? 75mm mais piqueur. H?lice horrible (direct poubelle pour la mienne) mais sinon un super planeur, ?a vole tout seul

  1. 1
  2. 2
Archivos de clientes
2X3S2200 lipo Download [370]
1 Download [412]
JN's CloudSurfer in flight Download [263]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios