New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

HobbyKing® ™ Mini-3D GeeBee cortado con láser de 600 mm Kit (KIT)

HobbyKing® ™ Mini-3D GeeBee cortado con láser de 600 mm Kit (KIT)

Discontinued Product

Please continue searching for a similar product.
Peso:
550 g
SKU:
HK-Mini-GBKit
WANT FREE SHIPPING? Click here to find out more!

Una 1ra para HobbyKing® ™, un equipo de constructores tradicional! Este es el mismo modelo que el HobbyKing® ™ Mini-3D GeeBee ARF, que una vez construido, ofrece una combinación de un ala de ultra gruesas y grandes superficies de control para un excelente rendimiento 3D. Este kit ofrece un montaje fácil y una piezas cortadas con láser, por lo que no como los viejos tiempos de cortar costillas y largueros, por lo que es una opción ideal para la generación ARF / RTF para obtener toda nostálgico y rayar construir un avión nuevo, sin un tiempo de gran o compromiso financiero, obtener sobre la base de esos días de mucho viento!

Se ha construido correctamente la GeeBee es casi tan ligero como una Shockie espuma, pero debe ser lo suficientemente resistente para soportar un par de golpes, no mencionar que es más resistente a la erupción hangar, especialmente en lo que usted quiere mantener su esquema personalizado prístina! Siempre dicen que no hay nada más satisfactorio que ver a su modelo construido de cero a tomar el aire .... ahora es su oportunidad de experimentar!

especificaciones:
Envergadura: 600mm
Longitud: 550 mm
Volar Peso: 210g
4 canales (acelerador, alerones, timón, elevador)

Se requiere:
Su propio canal 4 RX / TX
1500kv Micro Outrunner
10A ESC
3 x 5 g servo micro
2s 800mAh Lipo
Ligera cubierta de película de su elección
Hardware

  • SKU (Número de Referencia) HK-Mini-GBKit
  • Brand -
  • Capacidad ( mAh ) -
  • Peso ( g) 550.00
  • Longitud 630.00
  • Ancho 70.00
  • Altura 180.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This thing is a lot of fun. The instructions aren't great, but that's kind of expected of a scratch build in this price range.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This thing is a lot of fun. The instructions aren't great, but that's kind of expected of a scratch build in this price range.

This airplane lazercuts are not all the way through. So I had to use my scroll saw to cut plane out. Why did I buy a kit if I had to cut it out?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This airplane lazercuts are not all the way through. So I had to use my scroll saw to cut plane out. Why did I buy a kit if I had to cut it out?

Kit arrived in UK just before christmas well packaged and undamaged, However the long stripwood parts were missing. I decided to complete model using my own strip parts. When reported to Hobbyking they made it so awkward to supply the info they required that I had to give up. Its a poor reflection on H.king and staff. If I was trying to be dishonest I would have claimed more than just the strips.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Kit arrived in UK just before christmas well packaged and undamaged, However the long stripwood parts were missing. I decided to complete model using my own strip parts. When reported to Hobbyking they made it so awkward to supply the info they required that I had to give up. Its a poor reflection on H.king and staff. If I was trying to be dishonest I would have claimed more than just the strips.

Great kit, only Issue I had was the manual calls for the fusealge to be built upside down. The vertical fin is on the wrong side of the fuse in the pictures.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great kit, only Issue I had was the manual calls for the fusealge to be built upside down. The vertical fin is on the wrong side of the fuse in the pictures.

1. The laser cut is not all the way through in some places.

2. Laser cut is smaller than the peice that fits into the openings meaning you need to do a trial fit up an a lot of trimming. Still better than die stamped, but could be a lot better.

3. Warped wood included so you will spend time straightening peices.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

1. The laser cut is not all the way through in some places.

2. Laser cut is smaller than the peice that fits into the openings meaning you need to do a trial fit up an a lot of trimming. Still better than die stamped, but could be a lot better.

3. Warped wood included so you will spend time straightening peices.

Kit is a complete kit. I used the item PRODUCT ID: NS12415x10 and PRODUCT ID: MH23146-4 for making the linkages. 2xHXT500 servos for elevator and rudder, 1xHXT900 for aileron. Some trimming needed for 9gr servo placing. Made the landing gear with 3mm carbon rods and PRODUCT ID: OR006-00601. Used PRODUCT ID: Tz12A as ESC and HXM2730-1300 as motor. Also there is a big mistake in the manual when placing the F part on the A part. Do not stick these parts according to the manual because in the manual F part is sticked under the A part, not over it! Thank you HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Kit is a complete kit. I used the item PRODUCT ID: NS12415x10 and PRODUCT ID: MH23146-4 for making the linkages. 2xHXT500 servos for elevator and rudder, 1xHXT900 for aileron. Some trimming needed for 9gr servo placing. Made the landing gear with 3mm carbon rods and PRODUCT ID: OR006-00601. Used PRODUCT ID: Tz12A as ESC and HXM2730-1300 as motor. Also there is a big mistake in the manual when placing the F part on the A part. Do not stick these parts according to the manual because in the manual F part is sticked under the A part, not over it! Thank you HK.

I found someone (BoingK @ RCgroups) who has built this:

Seems you need:
4 x horns
CA Glue
A 9g servo in the wing instead of the 5g
4 x Pushrods
some Hinges or Tape
Battery strap (for fixing the battery)

According to BoingK @ RC groups:
http://www.rcgroups.com/forums/showthread.php?t=1423870#post18116314

"C20 motor fits well once you trim the fibreglass base"
"400g of thrust with an 8 inch prop on 2-cell"
"weight 220g or so ready to fly"

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I found someone (BoingK @ RCgroups) who has built this:

Seems you need:
4 x horns
CA Glue
A 9g servo in the wing instead of the 5g
4 x Pushrods
some Hinges or Tape
Battery strap (for fixing the battery)

According to BoingK @ RC groups:
http://www.rcgroups.com/forums/showthread.php?t=1423870#post18116314

"C20 motor fits well once you trim the fibreglass base"
"400g of thrust with an 8 inch prop on 2-cell"
"weight 220g or so ready to fly"

Kit arrived well packaged and undamaged. Total weight including balsa sheets, instructions and clear plastic bag is 184g. The balsa is of uniformly grained, good quality wood. Instructions have pictures as well as text and are very easy to follow, they also specifically recommend the C20 motor, 8x4 props and a 2s 800mAh lipo.



I will post pictures and video of fully assembled kit upon completion.



I give this kit 5 stars, but shipping was expensive. This could be avoided if they stocked in local warehouses (USA, Europe, Australia etc). To help get better value from the shipping I bundled servos, ESC, motor, props, covering film and control horns with it. This worked out well and I would recommend it to others.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Kit arrived well packaged and undamaged. Total weight including balsa sheets, instructions and clear plastic bag is 184g. The balsa is of uniformly grained, good quality wood. Instructions have pictures as well as text and are very easy to follow, they also specifically recommend the C20 motor, 8x4 props and a 2s 800mAh lipo.



I will post pictures and video of fully assembled kit upon completion.



I give this kit 5 stars, but shipping was expensive. This could be avoided if they stocked in local warehouses (USA, Europe, Australia etc). To help get better value from the shipping I bundled servos, ESC, motor, props, covering film and control horns with it. This worked out well and I would recommend it to others.

Customer files
IS40:31 GeeBee 1 Download [485]
IS40:31 GeeBee 2 Download [494]
BeeGee Assembled2 Download [1507]
BeeGee Assembled1 Download [1546]
BeeGee Assembled Download [1484]
HK Mini GeeBee (Turkish Ed:)) Download [1476]
Manual Part 2 Download [1914]
Manual Part 1 Download [1865]
Mini-3D GeeBee Laser Cut Kit Assembly In Download [462]
Mini-3D GeeBee Laser Cut Kit Assembly In Download [462]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save