El 3D PPE Reaktor es un modelo excelente para el vuelo acrobático 3D. Construido de espuma EPP estupendo, este kit puede manejar casi cualquier cosa que usted puede lanzar en él.
Sus grandes superficies de control ofrecen la autoridad extrema para maniobras 3D. Cuenta con un ala airfoiled con los mástiles de fibra de carbono incorporado por lo que es extremadamente rígido.
Alerones y elevador vienen pre-bisagra que ayudan a mantener el tiempo de montaje a un mínimo.
Volar Peso: 250g ~ 290g
Manual de instrucciones Color
Su propio canal 4 de TX / RX
10 ~ 12A ESC w / BEC
HK2612 sin escobillas del motor Outrunner
5 ~ 6 g Servo x 4
Batería 800mAh ~ 1000mAh Lipo 2S
SKU (Número de Referencia):
Peso ( g)
- SKU (Número de Referencia):
Hands down the best plane to have fun with. Very durable. On my third one and will always have one with me.
First one was so beat up, I cut 12" off of front and installed wing back in front of H stab, a stubby now. Even more fun then stock!Hi All. So I bought one of these and I love it! Really nice to fly and easy to assemble. The only issue I have is the landing gear... Not very strong and the wheels are way too small. But once in the air it is awesome!!!!
Nice productQuick delivery, no damage. the model is really well done, recommended !!Great fun plane, and very good value for money. Mine suffered from some poor quality control issues. The fuselage horizontal section was well-off square and had to be cut away packed out with foam off-cuts and re-glued.Great plane. Goes together fast, flies well on the recommended setup.Great plane, but mine does not fly right. Used recommended equipment and found CG way aft. I am going to move battery behind motor in an attempt to get it more forward. Any suggestions please help.Great plane. Put all stock recommeded equipment in plane and it just does not fly right. Not sure why but it is a little twithcy and need to stay on top of it. GC is farther aft than where it says it should be (80-85 mm) Maybe I need to move batt behind motor mount to get more forward CG and it will make the difference. Any suggestions would be appreciated.Haven't tried this one yet but it's a great price and looks fineThis was fun! Performs all the basic 3d maneuvers and I would recommend this to anyone looking for a semi-advanced 3d flyer. Pros: Quick and easy build (you probably have all the tools already, up in the air in about 3-4hrs with accl ca), Large control surfaces for extra snappy turns and rolls. Cons: The landing gear (broke the first landing which was very gentle). It broke where the plywood met the fuselage. I'd recommend not putting the gear on, but be sure to put the carbon fiber tail rod in, as this really helps. Very fun.This is my 2nd Reactor, Love this plane, my first one was my daily flyer for a year, super tough, and it is a blast!