Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

HobbyKing® ™ Stearman PT-17 biplano OEP 1200 mm (PNF)

Generating Links

HobbyKing® ™ Stearman PT-17 biplano OEP 1200 mm (PNF)

Precio:

Now save ahorra 0,00 € 0,00 €

125,87 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
PT17-PNP
¿Envío gratis? ¡Haga clic aquí! aprender más!

El prototipo Stearman PT-13 Kaydet dos biplano asiento voló por primera vez de Wichita, Kansas en octubre de 1934. Equipada con Lycoming R-680 motores radiales, los primeros entrenadores, designados PT-13, fueron entregados al cuerpo de aire de Estados Unidos a mediados de 1936, junto con más aviones en 1937 y 1938. en 1940 la demanda para el entrenador aumentó rápidamente y superó la capacidad de Lycoming suministrar motores. Esto condujo a la versión Continental con motor, la PT-17.

La importancia de la Stearman PT-13 / PT-17 para el esfuerzo de guerra de Estados Unidos no se puede exagerar. Aproximadamente el 50% de todos los pilotos militares de Estados Unidos, que combatieron en la Segunda Guerra Mundial recibió su formación inicial de vuelo en este avión robusto. Otros 10.000 RAF y del Ejército de Aire pilotos utilizan el entrenador Stearman para la formación primaria, en British Escuelas de entrenamiento del vuelo en los Estados Unidos, entre 1941 y 1944.

Ahora es tu oportunidad de añadir este avión de entrenamiento militar icónica de su flota. Esta versión Plug and Fly de la PT-17 está construido a partir de espuma EPO ultra resistente, y bellamente pintado de un modo exacto con el esquema de época. Ambas alas están reforzadas con largueros de doble carbono asegurar una estructura rígida y reducir al mínimo la flexión.

Características tales como el esquema de pintura de gran detalle escala, cabezas moldeadas de plástico del cilindro del motor, tubos de escape y las patas del tren realmente llevar este modelo a la vida. Es muy difícil decir este modelo es de espuma cuando está en el aire!

El montaje es fácil gracias al manual de instrucciones detallado y partes claramente etiquetados para la estructura del ala. Siendo el enchufe y la mosca, los servos, motor y ESC son pre-instalado, lo que significa menos tiempo en el banquillo y más tiempo en el aire!

caracteristicas:
• Construcción duradera de espuma EPO
• Plug and Fly versión, sólo tiene que añadir su propio sistema de radio y baterías
• esquema de pintura Hermosa escala
• Fácil montaje
• mástiles del carbón duales en cada ala

Especificaciones:
Envergadura: 1200mm
Longitud: 940 mm
Altura: 390 mm
Volar Peso: 1650 g
Hélice: 12x6 (incluido)
Motor: 3648 850KV (incluido)
ESC: 40A (incluida)
Servo: 4 x 9 g (incluido)

Se requiere:
el transmisor y el receptor de 4 canales
batería 4S 2200 ~ 3000mAh LiPoly

  • Envergadura ( mm ) 1200.00
  • HobbyKing® ™ Stearman PT-17 Biplane EPO 1200mm
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Wolfgang | Comprador verificado

  • Overall
  • Quality
  • Value

Sehr schönes und einfach zu bauendes Modell - aber schlechte Anleitung

Mar 10, 2018

Sehr schönes, detailreiches Modell, habe es diesen Winter gebaut und werde es demnächst einfliegen. Die beigefügte 3-blättrige Anleitung ist gelinge gesagt ein Witz. Jeder hätte das Modell auch ohne diese Anleitung problemlos zusammenbauen können. Und das Wichtigste fehlt: die Angabe des Schwerpunktes. Hier hat (ebenfalls ein deutschsprachiger) User namens "Franz" angegeben, dass der Schwerpunkt 7 cm hinter der oberen Nasenleiste liegt. Danke Franz !

PEDRO | Comprador verificado

  • Overall
  • Quality
  • Value

Superb.

Oct 29, 2017

Excelent quality and scale like the Navy Cub.

Peter | Comprador verificado

  • Overall
  • Quality
  • Value

Help finding CG

Oct 27, 2017

Does any one know the location of the CG? The brief instructions don't mention it!
I am ready to fly apart from this!!!
Thanks

Carl | Comprador verificado

  • Overall
  • Quality
  • Value

Crashed 1st Flight!

Sep 20, 2017

Unfortunately I didn't read the reviews before I flew it; and it crashed and broke the fuselage in half along with a couple Cabane struts on the first flight; the CG was too far back (nothing in the instructions about CG) and it snapped on the approach to land when it got slow. However, I was able to fix it so it looked almost new and it got to fly again; I didn't see any spare parts listed anywhere so I had to improvise on the broken Cabane struts. It flew much better the 2nd time; I had added 5.5 oz of lead in the firewall to get the CG froward where it should be (not much room in there for lead). The instructions are VERY brief and if you've little modeling experience, this is probably not the airplane for you to start with; however, it only took me a day to assemble it for flight.This is pretty much a fun airplane, not extremely aerobatic, has a relatively slow roll rate, will do loops, eights etc. but don't expect it to be a Pitts. It fly's at 1/3 to 1/2 throttle OK Good value if your just looking for something to have a little fun with.

Noel | Comprador verificado

  • Overall
  • Quality
  • Value

Flies very realistically but needs some alterations.

Jun 18, 2017

Flew the model for the first time this morning. I had to put some weight under the cowling and had some help from an experienced flier. We used the buddy lead between two Turnigy transmitters. It flew really well after trimming by my expert flier. Now I will try to make it more realistic by painting the exhaust ports and air intake in silver. Highly recommended.

Noel | Comprador verificado

  • Overall
  • Quality
  • Value

Excellent product

Jun 16, 2017

Very beautiful scale model of the Stearman PT-17. Very accurate as well, not as mentioned in other reviews: the PT-17 had the 7 cylinder Continental radial engine which was beautifully copied in this model, NOT a 9 cylinder engine as mentioned in another review. Will however add the wing rigging and will paint the connecting rod covers in silver to make it more realistic. Will add a review after finishing the model and hopefully fly it.

nick | Comprador verificado

  • Overall
  • Quality
  • Value

PT17

May 15, 2017

Mine arrived safely and all went together well. I had to put a chunk of lead in the nose cone.
I used foam 2 foam glue for the tail plane as it came with no glue.
I used epoxy to glue in the wing roots.
This bird has now become a firm favourite and lands very well.It also spins like a top.
Well done on another great model Hobby King.
Regards, Nick.

nick | Comprador verificado

  • Overall
  • Quality
  • Value

PT17

May 15, 2017

Mine arrived safely and all went together well. I had to put a chunk of lead in the nose cone.
I used foam 2 foam glue for the tail plane as it came with no glue.
I used epoxy to glue in the wing roots.
This bird has now become a firm favourite and lands very well.It also spins like a top.
Well done on another great model Hobby King.
Regards, Nick.

nick | Comprador verificado

  • Overall
  • Quality
  • Value

PT 17 Stearman

May 14, 2017

My Stearman arrived two days ago and was in perfect condition on arrival.
Maidened it yesterday and am happy to say this plane is becoming a favourite.
I had to add a bit of lead to the inside of the engine cowling and I am running a 3700 four cell.
It flies beautifully and spins like a top, What is NOT to like about this well made darling.
This evening I took an air brush to it and added a little weathering to it to remove some of the squeaky cleanness away and to make it look a bit like a hard worked trainer.
Fantastic value for money.
Thanks Hobby King.

Lennard | Comprador verificado

  • Overall
  • Quality
  • Value

Nice model- Just make it better

Jan 22, 2017

Money for value, This is a Great model. For the size of this, There is nothing else on the market at this price. Do not use the supplied glue, Use 30 min. epoxy, and remove the paint where you need to glue, I use acetone, works great. Pre-fit and sand, carve and do whatever to make sure all parts fit proper BEFORE gluing. Yes, you may need better screws for the horns, and Yes, You may need touch up paint, But really, Make this into a great flying model, Use common sense, This is a model, It is not perfect, None of them are, You may need to drill, cut, sand, use different screws, Whatever, The electronics in this are ok, just ok, they work, But I put better esc's and servos in all my aircraft. Just because I don't know what brand the factory uses, But again, This plane IS a Great plane for the price. I would buy another one, Just because of the price, AND it does look really good in the air. This is a old model, But I do buy a lot of old models, Because everybody works the bugs out. But do the RC groups search, And you will see the info. Mine is very detailed as all my aircraft are. I loved building this to make it look good, Hope you will too. As far as instructions go, If you really need Instructions to build this,, then this plane is not for you. That is why i will not comment on other reviews. And spare parts are available, just do a search,

  1. 1
  2. 2
  3. 3
  4. 4
Archivos de clientes
Manuel for ESC Download [1468]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Related Tags

Accesorios