Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

HobbyKing ™ BL-82910 Brushless digital Servo HV / MG 11 kg / 0.11sec / 56g

HobbyKing ™ BL-82910 Brushless digital Servo HV / MG 11 kg / 0.11sec / 56g

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
125 g
SKU:
BL-82910
Descripción
del

El uso series de motores sin escobillas de bajo consumo Hobbyking sin escobillas para la vida del motor prolongado y por lo tanto la fiabilidad, los voltajes de funcionamiento de alta tensión también significan este servo puede operar directamente desde una batería Lipo 2S, eliminando la necesidad de dispositivos de reducción de tensión como UBECs y reguladores.

Especificaciones:
Voltaje: 6.0V / 7.4V
Velocidad: 0.13sec / 60 grados (6.0V) - 0.11sec / 60 grados (7.4v)
Par: 8.4kg.cm (6.0V) - 11kg.cm (7.4v)
Tamaño: 40 mm x 20 mm x 37,5 mm
Peso: 56.4g
Tren de engranajes: Completo aleación de titanio
Motor: sin escobillas
Carcasa: Centro disipador de calor de aleación
Cojinete de bolas: 3
Pedido: 300 mm HD con Universal / JR Plug

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    BL-82910
  • Brand:
    HobbyKing
  • Peso ( g)
    125.00
  • Longitud
    107.00
  • Ancho:
    30.00
  • Altura:
    72.00
  • Unit Weight (g)
    56
  • Par ( kg ) ( min . 0,01 kg )
    11.00
  • Velocidad ( Sec / 60 grados ):
    0.11
  • A ( mm ):
    44.00
  • B ( mm )
    40.00
  • C ( mm )
    40.00
  • D ( mm ):
    20.00
  • E ( mm ):
    55.00
  • F ( mm )
    30.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Sorry Hobbyking there is way to much backlash in the gears on the ones I Purchased and when you move the servo arm within the backlash the servo motor does not even try to compensate maybe the deadband has been opened to compensate for poor quality gearing clearances! Was going to replace my Turnigy 1266Hv's in my Trex 700 with these but in comparison these have superior gear tolerances and nearly zero play in them and hold really well. Its pointless having the reliabilty of brushless motor if its let down by the drive train to the servo output arm!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered 3 of these based upon the great reviews, and this is what I got:

1 - DOA
1 - major gear slop
1 - OK

I needed 3 for my heli so I had to return all 3 even though one was good. Based on my experience I will not buy these again. They looked promising but with 2 out of 3 being bad I cannot recommend. Maybe it is just my bad luck but I am done.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am starting with a 5 star rating. I have setup 3 of them on the tail of my edge540. The resolution and centering is perfect, speed is great and current draw isn't a concern coming direct from a lipo.
The included arms are a very tight fit which makes for no play I the linkage and control surface. The arms are a little flimsy compared to others, but I trust they are as strong as the servo.
At centre they all are quiet, and no whining from the servo. And into motion or transition they make your standard digital sound and gears sound smooth.

The case feels like quality with a solid feel and gear looks to be titanium as advertised and not copper or brass.

I have not flown yet, waiting for two more for my ailerons. Also have done most setup and testing with 6v, which would provide good enough performance for most setups. But have run direct from a lipo too. I plan to report back with more info and results!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.