Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global
  • USA

HobbyKing ™ Mini Guppy Pendiente Planeador Balsa 1165mm (KIT)

HobbyKing ™ Mini Guppy Pendiente Planeador Balsa 1165mm (KIT)

QTY:

Now save guardar 0,00 € 0,00 €

40,32 €
Stock:
Peso:
984 g
SKU:
9419000005-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

El HobbyKing ™ Mini Guppy Slope es un modelo brillante perfecto para aquellos que buscan entrar en planeadores de pendiente! Trabajar con el diseñador Europea Mitja Erman, el Guppy se ha refinado en un gran modelo de pendiente disponible como un kit láser de corte de balsa. Tiene un cono de nariz de plástico extraíble que le permite hacer esto un modelo de potencia si así lo desea.

Si usted nunca ha construido un kit de balsa antes, el Guppy es bastante simple que puede ser abordado por casi todo el mundo. Cuentan las partes bajas y construir simplicidad no puede ser mejor.

Para completar el modelo, tendrá CA pegamento, un rollo de material de recubrimiento, papel de lija, hobbyknife algunas otras herramientas varias, además de todos sus equipos electrónicos. Con cuentan las partes bajas, toda la estructura del avión se puede construir en una noche. Lijado pasar otra noche, otra cubierta, con una cuarta noche de instalar la electrónica. Esto significa que en menos de una semana, puede tener un modelo que ha creado usted mismo, personalizado la manera que le guste.

El kit cuesta HobbyKing ™ Mini Guppy es un gran modelo pendiente de elevación más ligero que todavía puede manejar los vientos más fuertes con facilidad. A medida que el modelo se puede romper fácilmente para caber en una caja pequeña, es fácil de llevar alrededor, o mantener completamente montado para cuando los vientos son correctas. También disponible como un plug y volar, pre versión incorporada.

Enchufe y volar versión disponible aquí

caracteristicas:
• Versión Kit - incluye todas las piezas cortadas con láser, láminas, y el hardware
• Instrucciones de fotos ilustradas incluidas.
• El modelo Super divertido, luz ligera pendiente
• Diseñado para pendiente o se puede convertir en energía eléctrica

Especificaciones:
Envergadura: 1165mm
Longitud: 710 mm
Área de ala: 13.4dm²
Fuselaje Peso: 180 g


Necesario:
2+ transmisor y el receptor CH (micro receptor recomendado)
2 x micro servos 9g
4.8 ~ 6V batería del receptor
UBEC regulador / Voltaje (si se utiliza la batería del receptor 2S LiPoly)
material de cobertura

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    9419000005-0
  • Brand:
    HobbyKing
  • Peso ( g)
    984.00
  • Longitud
    560.00
  • Ancho:
    200.00
  • Altura:
    280.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
The main downside with this kit is the lack of instructions and plans required to build the kit. The can get away with no plans but the instructions have to be very clear and can not miss out important details. The instructions you receive as part of the kit is a series of pictures which a way to small to see and when there is an important stage the instructional picture is split into 4 even smaller picture that you have no chance of focusing on.

I also received the kit with missing stock balsa for the underside of the glider. If I knew there wouldn't be any then I would not have bought this kit as it would be over priced. This again comes down to poor instructions as I don't have a checklist to check if all the parts are in the box.

You will enjoy the final product but be aware that it is a very small glider. More details on a motor conversion are needed in the kit as it does say it can accommodate a motor. I would also appreciate the layout of the electronics and how to install servos into the wing/fuselage.

I know that people say to expect this from Hobbyking but I have always received great products in the past. This is so close to a five star review, its just the poor instructions that have such a big impact.
Quality
Value
Overall
Quality
Value
Overall
This is a great sloper with a couple of modifications. I read bad reviews about the built kit and it is understandable, when you build it you can do the right modifications. Where the wing attaches to the front of fuselage is to weak, one bad landing and it will break. The nuts for the trailing edge don"t stay glued, all i did was create an index for the wing and use the good ole 2 rods and rubber-band trick. The rear elevator control is tricky, i just bent the wire around the small horn and did my adjustments at the servo. I also attached a motor and folding prop because the weight needed to balance the plane is the same as a motor and ESC so why not!!! I guess what i am saying is you need some experience building. Flying the plane is a dream i love it, has a nice range from slow to fast. This plane has no rudder but you can modify that pretty easy, personally i think you don't need one on this model. Cant wait to fly it again!!
Quality
Value
Overall
Quality
Value
Overall
Overall a good kit. Fast and easy to build.
Biulding the kit:
1. A little skill is required to form the leading edge, wing tips and tail.
2. The wooden pieces for the wing mount nuts are weak - I set these in epoxy putty with a carbon strip under the supplied former with good results. 3. If you are not going to add a motor, form the nose out of balsa. The same goes for the canopy. These are only flimsy plastic.
4. Glue a piece of ply to the fuselage behind the wing to keep it pressed against the forward bulkhead - otherwise, the two tabs that hold the forward part of the wings are easily dislodged.
5. The plane is small, so use a color scheme that makes it easy to see in all directions and inverted. I used clear red on the underside of the wings, tail and fuse, clear yellow on the top of the wings.

Flight:
1. Add weight if it is windy and there is good lift. There is space next to the elevator servo. Make a lead block that fills the whole space and fasten it with a screw through the side of the fuselage.
2. Inverted flying is not very good due to the flat wing bottom.
3. Does not require very much lift in light conditions provided that you keep your speed up.
4. The plane is not very big and is relatively fast, so don't blink when you are doing a fast, low pass.

Overall, a fun and handy little plane
Quality
Value
Overall
Quality
Value
Overall
Overall a good kit. Fast and easy to build.

Biulding the kit:

1. A little skill is required to form the leading edge, wing tips and tail.

2. The wooden pieces for the wing mount nuts are weak - I set these in epoxy putty with a carbon strip under the supplied former with good results. 3. If you are not going to add a motor, form the nose out of balsa. The same goes for the canopy. These are only flimsy plastic.

4. Glue a piece of ply to the fuselage behind the wing to keep it pressed against the forward bulkhead - otherwise, the two tabs that hold the forward part of the wings are easily dislodged.

5. The plane is small, so use a color scheme that makes it easy to see in all directions and inverted. I used clear red on the underside of the wings, tail and fuse, clear yellow on the top of the wings.



Flight:

1. Add weight if it is windy and there is good lift. There is space next to the elevator servo. Make a lead block that fills the whole space and fasten it with a screw through the side of the fuselage.

2. Inverted flying is not very good due to the flat wing bottom.

3. Does not require very much lift in light conditions provided that you keep your speed up.

4. The plane is not very big and is relatively fast, so don't blink when you are doing a fast, low pass.



Overall, a fun and handy little plane
Quality
Value
Overall
Upload
Videos
  • Guppy Balsa Slope Glider

Upload video
Upload
Files

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.