Mostrar : TODAS LAS CATEGORIAS 0 Aeronave 1946 Aviones 1108 Todos los Aviones 147

HobbyKing ™ Lil3Der mosca de la diversión Balsa 1016mm (ARF)

HobbyKing ™ Lil3Der mosca de la diversión Balsa 1016mm (ARF)

6 Revisión

Precio:

Now save ahorra 0,00 € 0,00 €

93,59 €

Ya comprado Discontinued Product

Please continue searching for a similar product.

Envío gratis en pedidos elegibles

SKU:

9110000032-0

¿Envío gratis? ¡Haga clic aquí! aprender más!

Comparte este producto y Gana 500 puntos (4,68 €) [ ? ]

Descripción del producto

El HobbyKing ™ Lil3Der es un modelo de la mosca de la diversión de estilo clásico que es a la vez dócil y ágil, dependiendo de la configuración. El peso ala grande cuadrada y la luz da una excelente maniobrabilidad a baja velocidad mientras que las grandes superficies de control significa que usted puede lanzar el Lil3Der alrededor con un mínimo esfuerzo. Hemos optimizado este diseño para darle una sensación de control de la luz.

El Lil3Der llega casi listo para volar, sólo necesitan una noche o dos por valor de tiempo de construcción para completar. El totalmente construido de balsa y contrachapado fuselaje es fuerte donde tiene que estar, pero en general muy ligero. Ha demostrado ser un modelo duradero, teniendo los golpes de volar es bajo y lento. El servo del elevador está montado en el fuselaje de popa proporcionar un corto vinculación, directa. Para ayudar a centralizar el peso, el timón está montado debajo del toldo / trampilla extraíble, utilizando cables de tracción-pull para una configuración precisa de arrastre, bajo. Un paquete de hardware completa con todos los cuernos de control, cables, varillas de mando, CA bisagras, pantalones de la rueda de plástico, ruedas y tren de aterrizaje está incluido.

Además de la gran área de ala para un excelente manejo baja velocidad, el Lil3Der también tiene una amplia gama CG. Esto significa que puede configurarlo con un buen control de lanza y un centro de gravedad conservador para un entrenador acrobático dócil, o poner encima de los controles y que sea tan salvaje como desee. Con un buen manejo del acelerador, que volará durante más de 10 minutos, incluso en un paquete de 1300mAh. Una de las mejores cosas de la Lil3Der es la sensación de control de balanceo luz. Los alerones siguen siendo totalmente eficaz, incluso en el más bajo de la velocidad aérea.

El HobbyKing ™ Lil3Der es un edificio rápido, divertido volar avión que seguramente será un éxito en el campo!

caracteristicas:
• Casi listo para volar - Añadir su elección de la electrónica y la planta de energía y luego completar el montaje final!
• El peso ligero de balsa y el fuselaje de madera contrachapada
• tren de aterrizaje de aluminio con pantalones de la rueda de plástico
• área de ala grande y el peso total baja
• Acceso ventanilla de la pila magnéticamente garantizado
• Los cables del timón de tracción tracción permite un control preciso, con menos peso en la cola
• plano de mosca Gran diversión que maneja bien el viento, pero brilla en condiciones de calma
• Amplia gama de CG para adaptarse a una variedad de pilotos.

Especificaciones:
Envergadura: 1016mm
Longitud: 924mm
Ala Área: 27.3 dm2
Volar Peso: 650 g

Necesario:
Transmisor y receptor de Canal 4
2217 1100kv Outrunner Motor
20A ESC w / BEC
Batería 3S 11.1V 1500mAh Lipo 1300 ~
4 x Servo 9g
prop 10x4.7
CA delgada
medio CA

Especificaciones del producto

Envergadura ( mm ) 1016.00

Videos

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Discutir 0

Temas

Ordenar por

Temas más recientes

Publica un tema nuevo

Revisión

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

David W | Comprador verificado

Overall
Quality
Value

Great plane when on sale....

Jan 14, 2018

Yes, the plane needs a bit of help from the builder, but with today's carbon fiber rods, the areas that need attention are an easy fix. Most builders HAVE the necessary items laying around, so when completed, this plane is a kick to fly and will last...as long as one doesn't slam it into the ground. Mine is way over powered at 500watts, but then, I like my planes to "dance" if you know what I mean. Wait for it to go on sale, and you won't be wasting your money....as others have said. I mean, an ARF for $50.00...how can one go wrong?????

rumble | Comprador verificado

Overall
Quality
Value

Customer Rated

May 29, 2016

I really enjoy this plane. it has plenty of room for the electronics, control surfaces work great. I used some epoxy on the center of the elevator, it was a weak point. this is my 2nd balsa plane and it has been in the air over 30 minutes and has survived 3 landings. I recommend this for beginners. I spent over $150 for my first balsa plane and it lasted about 90 seconds in the air.

I made this video of my 3rd flight
https://www.youtube.com/watch?v=6wV5PwoIluk

zen88 | Comprador verificado

Overall
Quality
Value

Customer Rated

Jan 10, 2016

buon modello leggero forse troppo e facilmente assemblabile, buone finiture ottimo per imparare acrobazie, non adatto al volo in condizioni di vento
unico difetto il piano di quota in particolare l'elevatore un po debole, da sistemare

GhiaMonster | Comprador verificado

Overall
Quality
Value

Customer Rated

Oct 26, 2015

Can't say much worse than everyone else. Found the same flaws both mechanically and manual errors. When I say manual I should say GUIDELINES. There are gaps and outright discrepancies throughout. For example, installing the elevator servo. The text specifically says to install the servo on the RIGHT side but all the pictures show the servo on the LEFT side. Luckily it doesn't seen to matter because the hole for the servo is cut out on both side and they're symmetrical. Unfortunately, the supplied pushrod is TOO SHORT.

If you've built planes before you CAN muddle through. I haven't gotten to the first flight yet so can't attest to that but I agree with the crappy design/materials. I've heard more than a couple *cracks* coming from the stringers and I usually aren't that ham-handed and am careful. They must have cleared out the "way too soft balsa" rack on this one.

By the way, I first saw this plane in the International warehouse and there were no reviews and the few comments weren't negative. I then switched to the US warehouse and just bought it. That'll teach me not to read BOTH sets. If I had, my $65 would have been spent elsewhere.

Khoysagk | Comprador verificado

Overall
Quality
Value

Customer Rated

Oct 08, 2015

Terrible plane. The construction is so weak the control surfaces will actually flex, bow or whatever you want to call it. Apparently all balsa is not created the same. It also came out tail heavy even with a 3S 2200mah lipo pushed all the way forward. It did fly well for as cheap as it is constructed, but forget about about doing any kind of precision maneuvers. I managed to hover it but even knife edge required a lot of speed. I tossed it in the trash after the first flight. What a waste of money and time.

David | Comprador verificado

Overall
Quality
Value

Customer Rated

Jul 01, 2015

I received this from the US East warehouse quickly enough however can build it since I have no manual which is on a CD, not a booklet or paper manual! When packing my order for the 3Der, person put packing tape over the data side of the CD so useless.
Online support NO help...they just referred me to setting up a part ticket to product specialist??? Huh! If your luck, 24 to 48 hours before they act...
So much for HK's fast and fair service. As for the plane, well it sits un-built until and "if" I ever see the manual.

Gary | Comprador verificado

Overall
Quality
Value

Customer Rated

May 20, 2015

The quality of the aircraft is just so-so. The assembly is fairly easy but there are numerous errors in the manual. The plane actually flies OK but nothing special. Of course, it came from HK so my expectations were not high, anyway

Manuales / Archivos

Archivos de clientes