Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

HobbyKing ™ Mini palillo de corte láser 580mm Kit (KIT)

Generating Links

HobbyKing ™ Mini palillo de corte láser 580mm Kit (KIT)

Precio:

Now save ahorra 0,00 € 0,00 €

22,55 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
MINISTICKKIT
¿Envío gratis? ¡Haga clic aquí! aprender más!

HobbyKing ™ Mini palillo de corte láser 580mm Kit (KIT)

Esto es un reemplazo Mini palillo única célula. kit de fuselaje de balsa viene sin cubierta, tendrá que aplicar su propio. Esto es grande para una armadura de avión de reemplazo, o si se quiere construir su propio mini Stick de la tierra para arriba y elegir su propio esquema de cobertura. Este kit ofrece un fácil montaje y piezas cortadas con láser, por lo que no como los viejos tiempos de cortar costillas y largueros, por lo que es una opción ideal para la generación ARF / RTF para obtener toda nostálgico y rayar construir un avión nuevo, sin un momento de gran tamaño o compromiso financiero, obtener sobre la base de esos días de mucho viento!

Especificaciones:
Construcción: Balsa
Envergadura: 580mm
Longitud: 440mm
Volar Peso: 110 g

Incluido:

Balsa de células sólo w / salida que cubre

Se requiere:
Su propia 3 ~ 4 Canal TX / RX
C10 Motor 2900kv
5A ESC
3 x servos 2.5g
Batería 200mAh ~ 400mAh Lipo 2S
Ligera cubierta de película de su elección
Hardware
cyno pegamento

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Khim Tat | Comprador verificado

  • Overall
  • Quality
  • Value

Grest little plane

Nov 22, 2016

Bought 2 of these, built one with lots of lightening holes and wing built without planking the front except the center portion. Using the Orange rx with gyro. The plane is my goto plane and everyone in the flying field was impressed when they see the little stik ROG and land slowly and gracefully. HK, please bring this back to the International warehouse. I need a few of these to make up a biplane and a trimotor

RemoteQA | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 20, 2015

I bought this years ago to make up the weight in a parcel. And for years it gathered dust. But not any more. The almost total lack of instructions makes it more a jigsaw puzzle than a flying model kit. But go slowly and you will love it. The Laser cutting is Fab. Build on a rock solid flat board. I note comments about the cofg. I have not flown mine yet and I am guessing 20-25pcnt aft of the LE. (25pcnt is on the spar and that's traditional, should be a good starting point. I have really loved the build using super glue everywhere. The 4 push out pieces from the tailplane make great wheels. 2 for each wheel with opposing grains. There should be more like this !!!

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 13, 2014

awesome kit all the wood was cut perfectly. but the instructions on how to build it were very bland. "build the wing" well if you were in-experienced you'd think how am i supposed to build the wing?...yeah that part of the kit could use some work but the wood work itself well worth it for the money!

julien | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 04, 2013

Top plane, top fun :
Here is a video of the plane flying with a cox Tee Dee 0.020 :
wwwDOTdiydronesDOTcom/video/ptit-navion

hansest | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 14, 2013

One of the funniest planes in my collection :) This plane i use for my everyday flying. Many people have been impressed over this little plane. I use Turnigy SK3 2118-3100kv motor SKU: SK3-2118-3100 mounted on the outside on the front. A GWS 5043 prop SKU: GWS-DD-5043, and a Turnigy Plush 10 amp ESC SKU: TR_P10A. I bought a fitting Lipo with 500 mAh from my local store but this will do the trick: Zippy 2 cell SKU: Z5002S20C. With this combo the CG should be perfect and the plane goes like a rocket and straight up if you want, but its forgiven too if you slow down the throttle. I use 30pcnt exponential on the transmitter for more feeling with the movement.
I used regular white wood glue for assembly and red, white and black Oracover for covering. I also use carbonfiber landing gear SKU: OR032-00101 for lightweight, stronger and a nice look. The small foamwheels is SKU: OR006-01003. Look at the files section and select "MiniStick, hansest" for the build results of this plane

RC Venado | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 10, 2013

Very good laser cut quality, wood pieces very nice.

Cons: No plans. no problem for my 30 years building balsa models, but this is not a kit for someone who has'nt built a kit before.

HK, it would be nice to inchude the building plan in the kit.

hansest | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 05, 2013

One of the funniest planes i have :) This plane i use for my everyday flying on a football field nearby. In this plane i use Turnigy SK3 2118-3100kv motor http://hobbyking.com/hobbyking/store/__18112__Turnigy_Aerodrive_SK3_2118_3100kv_Brushless_Outrunner_Motor.html mounted on the outside on the front. A GWS 5043 prop http://hobbyking.com/hobbyking/store/__10034__GWS_EP_Propeller_DD_5043_125x110mm_6pcs_set_.html and a Turnigy Plush 10 amp ESC http://hobbyking.com/hobbyking/store/__4204__TURNIGY_Plush_10amp_9gram_Speed_Controller.html. I bought a Lipo from my local store but this i think are a suitable one http://hobbyking.com/hobbyking/store/__6788__ZIPPY_Flightmax_500mAh_2S1P_20C.html. With this combo the CG is perfect and the plane goes like a rocket and straight up if you want!
I used regular white wood glue for assembly and Oracover for covering included the iron crosses i cutted out from templates. I also use carbonfiber landing gear http://hobbyking.com/hobbyking/store/__4502__Carbon_Fiber_Landing_Gear_100mm.html?strSearch=or032-00101 for a lightweight and a nice look. Also i used a pair of small foamwheels http://hobbyking.com/hobbyking/store/__9858__Small_Wheel_Diam_20mm_Width_10mm_5pc_Bag_.html, on wheel axles i used a carbon rod. Picture of this plane can be seen under files section named MiniStick, hansest

LOPEX | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 18, 2012

non so ancora se vola ma a costruirlo ci si mette 15 minuti

GhiaMonster | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 05, 2012

First, where is the CG supposed to be? The (and I use the term loosely) "instructions" that come in the package on an obvious KIT are for assembling the ARF! An even then, the CG shows as being right at the back edge of the wing sheeting (30 mm) but SAYS 100mm (just short of 4") measured from the leading edge of the wing. Now since the wing chord is just about 5.25" wide I find this impossible.

When it came time to balance, I used the old school of 1/3 of the wing chord back from the leading edge, which works out to almost 45mm. I wondered why the darn thing porposed all over the place...grossly tail-heavy.



So now I'll balance at 30-ish mm and test fly again.



I've also jacked up the manufacturer about the lack of instructions and plans - actually got a response of "Really? We'll look into that". Sure.

Dr Totakt | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 12, 2012

A fun an educational build, without all the hassle of cutting balsa sheet like in the old days.

Supplied lasercut balsa was good quality, and the build went relatively easy for a newbie like me. Instruction sheet was hard to read (old eyes), thank God someone has been nice enough to upload an easy to read scan in the files section. : )

C10 motor suites this plane well, and it is a gentle flyer. CG is spot on with a 400mA 2S, and it sustaines level flight at 1/3 throttle or so.

Uploaded a few pics of my new pup in the files section.

  1. 1
  2. 2
Archivos de clientes
Mini Stick Plans Download [139]
Cox .020 Download [2076]
Cox .049 Black Widow Download [2387]
is40:31 Mini Stick twins Download [707]
Park 250 on Mini Stick Download [2012]
bare frame Download [57]
Park 250 on Mini Stick 2 Download [699]
Park 250/1811 test results Download [596]
IS40:31 Mini Stick Download [1838]
Dr Totakt, MiniStick Download [261]
  1. 1
  2. 2
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios