Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

HobbyKing ™ Typhoon 3D Balsa 1250mm (ARF)

Generating Links

HobbyKing ™ Typhoon 3D Balsa 1250mm (ARF)

Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9110000031-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

El HobbyKing Typhoon ha sido construido exclusivamente para 3D. Esta balsa y contrachapado airfame llega casi listo para volar con enormes superficies de control y una carga alar la luz, la receta perfecta para algunas acrobacias aéreas extremas!

Al abrir la caja que son recibidos con un alto nivel de fabricación. Sólo tiene que instalar hardware, electrónica, y el montaje final completa a estar listo para volar. modeladores experimentados pueden tener el Typhoon listo para volar en una noche o dos de trabajo.

Las superficies de control están articuladas con bisagras CA estilo. Ala montado servos de alerones y una cola montado servo del elevador mantiene barras de control corto y preciso, mientras que el servo del timón está montado en la delantera con los cables de tracción-pull corriendo a la espalda, manteniendo el peso adicional de la cola.

tren de aterrizaje de aluminio y fibra de vidrio pre-pintado de la capucha y pantalones de la rueda completan paquete integral del Typhoon. Justamente proporcionando el tipo de motor, la batería y la electrónica, unos adhesivos de construcción, y ya está.

El muy atractivo HobbyKing Typhoon 3D ofrece un rendimiento excelente tanto para el piloto 3D y el volante deportivo. Esta es la perfecta modelo redonda para el intermedio al piloto experimentado, ya que se ve bien, vuela muy bien, es práctico y no cuesta la tierra, no se puede pedir más!

caracteristicas:
• casi listo para volar - el montaje final completo, e instalar su elección del sistema de la batería y la radio
• Construida de balsa y contrachapado luz fuselaje
• 2 piezas alas de plug-in
• combinación de colores de alta visibilidad con los colores superior e inferior distintos para una fácil orientación
• Las superficies de control de gran tamaño para un rendimiento impresionante 3D
• Pre-pintado en carenado de fibra de vidrio y pantalones de la rueda
• paquete de hardware completo que incluye los cables de tracción-pull de timón

Especificaciones:
Envergadura: 1250mm
Longitud: 1106mm
Peso: 1350 g w / o de la batería
Ala Área: 29,13 dm2

Necesario:
Transmisor y receptor de Canal 4
Servos: 4x 12g metal gear digitales
Control de velocidad 40A sin escobillas
35mm Outrunner Motor (500-600 vatios)
Batería 3S 11.1V 2600mAh LiPoly 2200 ~

  • Typhoon EP
Subir video

Regístrese para subir videos, por favor registrarse o registrarse

Regístrese para escribir reseñas, por favor registrarse o registrarse

Kevin | Comprador verificado

  • Overall
  • Value
  • Quality

typhoon

Dec 17, 2017

definitely under NO circumstances, try fly this without removing the skin from elevator and fill all gaps with balsa and then reskin. i have bought 2 of these and both had epic elevator collapse. the first plane was destroyed after the elevator broke up mid flight and jammed in rudder. i had a close call with the second one and have now reinforced elevator, and hope to enjoy more flights with it as they do fly great once modified.

Kevin | Comprador verificado

  • Quality
  • Overall
  • Value

typhoon

Oct 11, 2017

just received my second one of these. i did not realise the hinges in the elevator were not glued properly and had a failure mid air and run out of luck, altitude, and ability and turned the typhoon into a tropical low. it did however fly like a dream before the appocolypse..look forward to getting the new one airborne soon

Parvulescu | Comprador verificado

  • Overall
  • Value
  • Quality

Installation, flight, defects

Oct 30, 2016

The engine used is a Turnigy D3542 / 6 1000kVA.
Corona 939MG Metal Gear Servo Servo are 2.5kg / 0.14sec / 12.5g.
The battery is 2200mAh 3S 40C Turnigy
The propeller 11x5,5
ESC TURNIGY Plush 60amp
Glues used: Epoxy and CA glue.
I installed servo on ailerons. The problem is that the cut is larger than the servo. I cut some rectangles of plywood and I glued with epoxy on the inside.
Wing cross pins in the aircraft fuselage must be stabilized with care. The holes are not centered.
The hinges of the ailerons must be positioned perpendicular to the slit wing to penetrate CA glue. This is not mentioned in the manual.
I mounted horizontal stabilizer, and when I mounted the elevator I bent wire that fixes the two sides of the elevator. Care should be taken. I turned this after curing epoxy.
Vertical stabilizer after removing the foil must be mounted at 90 degrees to the horizontal stabilizer. To me have a little movement.
At the rudder I added another hinge.
I added the rudder servo for some rectangles of plywood on the inside in order to fix the servo.
To fix the hood must stick pieces of balsa fuselage. In this manual is not detailed. The screws must enter those pieces of balsa.
Be careful not to move the bonnet and engine to rub it.
Cross holes in the motor does not match the holes made by the manufacturer.
I cut a piece of plywood and we stuck it behind the bed frame. I gave other holes.
First flight - horizontal stabilizer was broken in flight. I had to reinforce it with pieces of balsa placed diagonally.

Finally stabilizer was broken in the air. Total destruction. Stabilizer poorly designed.

maverick4you | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

May 12, 2016

Semplicemente perfetto! acquistato quando in promozione e' stata una piacevole sorpresa. Molto simile nelle dimensioni al Su-20 classe 30 della Sebart.
Costruzione ottima e copertura perfetta. in volo e' visibilissimo.
il mio l'ho motorizzato con un Turnigy 35-42/6 da 1000kv esc da 50A, elica APC 13x6,5. con una batteria 3s da 2200mha il modello e' perfettamente bilanciato.



Simply perfect! purchased when in promotion and 'was a pleasant surprise. Very similar in size to the Su-20 class of 30 Sebart.
excellent and perfect cover construction. in flight and 'highly visible.
I have my motor with a Turnigy 35-42 / 6 1000kV esc 50A, propeller APC 13x6,5. with a 3s battery 2200mha the model and 'perfectly balanced.

V-Man | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Sep 13, 2015

Got this plane in the recent "free shipping" sale. Not sure I would have gotten it if I had to add $70 in shipping and custom fees, so thanks HK. It's pretty nice! Needs quite a bit of work, tighten up the covering job, some glue joints need attention, locating holes for servos and pushrods. Cowling paint job is a bit sloppy; will need cooling holes cut into it. The tail surfaces will need reinforcement they're way too thin and flimsy to stand up to violent 3D maneuvers (I will add a carbon spar). Nice touch, though, all the control surfaces are pre-hinged, just glue it together. Manual is poor but anyone who assembled a plane before will do just fine. Overall, I'm happy with my purchase.

Archivos de clientes
Typhoon EP Manual Download [576]
Unboxing Download [1321]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios