Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

HXT 2040 (130L) 2080kv sin escobillas Inrunner

HXT 2040 (130L) 2080kv sin escobillas Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
100 g
SKU:
HXT2040-2080
Descripción
del

Tamaño del motor: 2040 (130L)
Velocidad: 2080kv
ESC requerido: 18A
Rango de voltaje: 6 ~ 12v
Sin carga Curr: 4A
Carga máxima: 19A

Diámetro: 20.2mm
Longitud: 42 mm
Frente Montaje Distancia del agujero: 16 mm
Montaje delantero Medida de rosca: M2.5
Diámetro del eje: 2,3 mm
Longitud del eje: 15mm

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    HXT2040-2080
  • Brand:
    N/A
  • Peso ( g)
    100.00
  • Longitud
    0.00
  • Ancho:
    0.00
  • Altura:
    0.00
  • Kv (rpm / v)
    2080.00
  • Corrientes max (A)
    19.00
  • Potencia ( W ):
    0.00
  • B Longitud ( mm ):
    47.00
  • Puede longitud D ( mm )
    41.00
  • Max Voltaje ( V )
    12.00
  • Un eje ( mm ):
    2.00
  • Unit Weight (g):
    N/A
  • C Diámetro ( mm )
    20.00
  • Longitud Total E ( mm )
    57.00
  • Resistencia ( MH ):
    0.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Despues de 3 minutos de vuelo con una 5x4, simplemente se paro. Giro en tierra a pocas revoluciones, poco despues paro total.

After 3 minutes of flight with a 5x4, just stop. Drawing on the ground a few revolutions, shortly after total unemployment
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bien et tres puissant pour le prix
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor has 4 screw holes in front and 4 in back.

Specifications in the product description are accurate.

Motor runs solid.

Will update once I have flown the glider it is in.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ein super Motor fr meinen Taschenflitzer. Dazu habe ich einen HK SS 18A Regler und einen Rhino 1050 2S Lipo. Luft tadellos.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
12A con una 4,7x4,7 con 3 celle e 450 grammi di spinta, il motore per si scalda un po'..

4 stelle perch arrivato con molto gioco assiale sull' albero, ma se si usa un'elica spingente non d problemi
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Burnt motor on first day. Runs really hot, Was using a 6X4, 3S 2200,20A ESC. and a rather heavy plane. Nice motor but for light plane and lots of cooling.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
3 moteurs achets, 2 hors service, les bobinages etaient abims et le fil en court circuit (visible par les trous d'aeration de la flasque arriere. La qualit laisse a desirer et surtout son suivi, selon les lots !

bref le cout de remplacement est inferieur aux frais d'envoi. Deception
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used it with a 5x5 prop in my Zagi XS in direct drive mode to directly replace the zagi 400 motor and a 2150mAh battery. I put clear silicon caulk under it so the heat would not melt the plastic and secured it with the zip tie in the same holes as the zagi 400. It lightened up the airframe and flys much faster.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
EASYGLIDER ELECTRIC.

-Fits perfect on my multiplex easyglider electric, just make sure to shorten/sand by 1 mmm those 2 stock motor screws that came with the glider, otherwise, the screws will hit the motor coil.

After installing this motor, and running it for 2 minutes at full throttle, it got hotter than HELL!

-Running on everything stock, but motor.

-Reading shows 9.5 Amp/105 watts @ full throttle

-3s Li-po, 1750mAh, 20C
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Help will this motor be ok in my easy glider 70inch wing
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.