Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

HXT 2040 (130L) 4850kv sin escobillas Inrunner

HXT 2040 (130L) 4850kv sin escobillas Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
100 g
SKU:
HXT2040-4850
Descripción
del

Tamaño del motor: 2040 (130L)
Velocidad: 4850kv
ESC requerido: 18A
Rango de voltaje: 6 ~ 12v
Sin carga Curr: 1.8A
Carga máxima: 25A

Diámetro: 20.2mm
Longitud: 42 mm
Frente Montaje Distancia del agujero: 16 mm
Montaje delantero Medida de rosca: M2.5
Diámetro del eje: 2,3 mm
Longitud del eje: 10mm

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    HXT2040-4850
  • Brand:
    N/A
  • Peso ( g)
    100.00
  • Longitud
    0.00
  • Ancho:
    0.00
  • Altura:
    0.00
  • Kv (rpm / v)
    4850.00
  • Unit Weight (g)
    N/A
  • Corrientes max (A):
    25.00
  • Resistencia ( MH ):
    0.00
  • Max Voltaje ( V )
    12.00
  • Potencia ( W )
    0.00
  • Un eje ( mm ):
    2.00
  • B Longitud ( mm ):
    47.00
  • C Diámetro ( mm )
    20.00
  • Puede longitud D ( mm )
    41.00
  • Longitud Total E ( mm ):
    56.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
put this motor in my F-18, added heat sink, running plush 40 esc with 3s1p 1300 40c lipo, on a gws 64mm 6 blade fan

test results:

amps, full throttle: 38a peak

watts: 412w peak

did not do a thrust test yet, but it seems impressive, the heat sink should help cool the motor, the motor I have is under the Turnigy name, B2040-4850, will test fly the plane today, the original motor was a Arttech 4300 kv, same diameter as this one, it was not very impressive just did ok, we'll see how the B2040-4850 works out

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Absolutely awesome performance.
I am using it on a Grupner mini Discus 2CT, with the stock folding CAM prop that comes with it. All up weight around 300 grams.

Fast climbs and nice glides. This motor fits PERFECTLY into the Graupner Motor Pod, so you can replace the stock brushed motor.

Draws about 34 amps, but delivers a lot of thrust.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor. I used 4 motors in homebuild model and they works great.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Came the engine in the work (load) has not yet been tested, is made like quality, was confused, udnogo have a small gap, the second all clear, as can we can remove the gap?

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
What is the actual length of the shaft on this!?!?!?
"E" (56mm) - "B" (47mm) = 9 mm NOT FIFTEEN?????
HK got it wrong with another motor I purchased also..
NOT IMPRESSED!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Installed this motor in a Hyperflow fan unit in a converted Funjet. It worked great, but on the 4th flight the motor quit and upon landing the plane the 35 amp speed control caught fire. The speed control didn't turn out to be the problem. The top cap of the motor, which screws on, came unscrewed from the motor case allowing the torque of the motor to twist the motor case and the three wires to the point that they shorted against each other and caused the speed control to ignite. Luckily the plane only had minor melting damage, but the motor is shot. Make sure you secure the top motor end with locktite. Other than that I was very pleased with the motor on a 3 cell 1550 pack.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great motor, running in 22" boat on 2s and waterjacket, has heaps of grunt.



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got this on a 5X4.5 prop and a 3s and its got lots of power. It comes in orange and says turnigy on it. better that way, purple is for girls
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Put in a GWS 55mm fan and got 27a. ESC failed at the field before flight, but should be nice and fast!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice Little Inrunner Motor



recommended for 55/64mm edf
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.