Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

HXT 2835 (380S) 3900kv sin escobillas Inrunner

Generating Links

HXT 2835 (380S) 3900kv sin escobillas Inrunner

Precio:

Now save ahorra 0,00 € 0,00 €

18,90 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
HXT2835-3900
¿Envío gratis? ¡Haga clic aquí! aprender más!

Tamaño del motor: 2835 (380S)
Velocidad: 3900kv
ESC requerido: 40A
Rango de voltaje: 6 ~ 12v
Sin carga Curr: 2.0A
Carga máxima: 40A

Diámetro: 28.2mm
Longitud: 37 mm
Frente Montaje Distancia del agujero: 15 mm
Montaje delantero Tamaño de la rosca: M3
Diámetro del eje: 3.2mm
Longitud del eje: 12mm
Peso: 102grams

  • Kv (rpm / v) 3900.00
  • Corrientes max (A) 40.00
  • Resistencia ( MH ) 0.00
  • Max Voltaje ( V ) 12.00
  • Potencia ( W ) 0.00
  • Un eje ( mm ) 3.00
  • B Longitud ( mm ) 37.00
  • C Diámetro ( mm ) 28.00
  • Puede longitud D ( mm ) 36.00
  • Longitud Total E ( mm ) 49.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Tester22 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 22, 2012

This motor is awesome. My config is 4S 35C 1800 mAH, 40A Plush, 5x5 TGS prop. Have had to End Pt Adj the Throttle of my 12FG down to 40pcnt to limit @45A WOT. With this setup my FUNJET ULTRA accelerates vertically out of sight!!!! I couls try 4.5X4.5 but!!!!!! Great motor!!! Using the limiting, motor is V warm on LDG after 8mins, but longevity should be OK.

Little-Acorn | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 06, 2011

I am using this motor with 3s 2200mAh 25C LiPo batteries and 40A ESCs, in both an EasyStar and a SkySurfer (or Bixler as HobbyKing calls them). Very good performance with an APC 5.5x4.5 prop, and out of this world with a Master Airscrew three-blade 6x4. It turns 21,100RPM on the bench with the MA three-blade, and can climb straight up out of sight. But a 1/2 throttle I've gotten a 26-min flight on the SkySurfer, while doing gentle climbs, occasional stunts, and two 10-second vertical blasts. An excellent motor for those planes, for both gentle flying and for wild&crazy. It would probably deliver high speed in horizontal flight, but these two planes aren't built for that so I haven't tried.

virdun | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 28, 2011

I have mounted this motor on a stryker F27c. the setup was a turnigy 2200mah 3cell lipo, 60amp turigy plush esc and the hxt motor. Well with 4.75*4.75 after 3 min flight motor stopped and landed. the motor was extremely hot. After some hours i tried a 6*4 prop and in less then a minute motor stopped again and again extremely hot and motor caput! What am I doing wrong?

virdun | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 26, 2011

I purchased this and mounted it on a stryker f27c. I had this setup, 60amp plush esc, 2200mah 3s 20c turnigy battery and the 2835-3900 motor. esc and motor got extremely hot with 4.1*4.1 prop. tried a 6*4 prop and killed the motor. have I done something wrong?? Was the motor defective????

virdun | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 17, 2011

I have mounted this motor on a stryker F27c. the setup was a turnigy 2200mah 3cell lipo, 60amp turigy plush esc and the hxt motor. Well with 4.75*4.75 after 3 min flight motor stopped and landed. the motor was extremely hot. After some hours i tried a 6*4 prop and in less then a minute motor stopped again and again extremely hot! What am I doing wrong?

Brian | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 01, 2011

Best motor for 68mm 6 blade edf. 55 amps using turnigy 4s 40c. Makes TWM J10 into a true fighter jet. My jets currently run all turnigy and HK products. My jets are fast and reliable!

christopher | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 03, 2011

Running this motor on 3cell 2200 turning a 4.1x4.1 apc at 30,000rpm. 25oz speed plane. Simply awesome!!! After repeted abuse it still runs strong. Cant wait for more to come available.

Tom | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 30, 2011

This is a great little engine. I am using this on my Funjet (original funjet - not ultra) and have had no problems. The engine is not getting hot at all. I'm running:



- 4.75 X 4.75 prop

- 80amb Turnigy Plush ESC

- Turnigy Nano-tech 11.1v 3000mah battery

- Turnigy Digital high torque bearing servo 16.2g/3.1kg/.16sec



I am very happy with all the gear I have purchsed from Hobbyking!

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 21, 2011

Exelente motor uso em uma asinha de velocidade com hlice 4.75x4.75 speed de 50A

chega a aproxim. 2ookh

craschtest | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 16, 2011

mont sur un Stinger (env 95cm) de topmodelcz, avec esc turnigy AE-45A, lipo 3S 2650mh, hlice 4,75/4,75 , a brul aprs 1min plein pot , autrement ,"" sa dmnage "" .

Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!