Durante el vuelo de tensión Logger y analizador de mantenimiento (2S-6S)

• Overall
• Quality
• Value

Customer Rated

Jan 04, 2015

Remark: Calibration take some time and patience. Pushing A and B button at the same time is a kind of Russian roulette. Setting cycle time and LiPo/LiFe can be problematic. If for instance cycle time is set on 4 seconds pushing A and B to confirm (and you mistakably push A and B not exactly on the same time) the time is set to 3 or 5 seconds. Unfortunately you have to start all over at the beginning. Produce a graphic of the LiPo total voltage during the flight together with the hold the lowest voltage per cell is not possible. Its the graphic or the hold function.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 03, 2015

After calibration with a 6 S power source the In- Flight data logger works perfect. Just press button A just before flight and afterwards you know exactly the lowest voltage per cell during the flight. I set the sample rate or cycle time on 4 seconds which gives me 8 minutes measuring time. Dont forget to set the battery type on L (LiPo) Remark: during calibration be sure you A and B at the same time otherwise the setting changes un-intentionally.

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 12, 2012

display is not clear plusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplus

• Overall
• Quality
• Value

Customer Rated

Sep 15, 2011

This device is really useful for measuring the pre-flight voltage, minimum voltage in-flight, and voltage after the flight. The difference between the minimum in-flight and after flight voltages gives an indication of battery health. In my setup the difference is ~ 0.2 volt, and I can expect this to increase as the batteries age. I can use these results to adjust my flight time (transmitter timer) so that the battery voltage does not discharge too low in-flight.

• Overall
• Quality
• Value

Customer Rated

Jun 19, 2011

Disapointing - dosent show the correct voltage. First I thought my charger ballances wrong. Tried another charger. Both chargers show 4.20V on all 6 cells but the logger shows 4.20, 4.20, 4.17, 4.18, 4.19, 4.21
to bad for $20

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 13, 2011

must have tool. Wery good for indication of the health of the battery. For JST, XHT connectors

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 14, 2011

A nice little tool for managing batteries, but unfortunately can not PolyQuest connectors.

Otherwise, everything very well.

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 24, 2010

preciso, leggero, prezzo buono.

5 stelle

• Overall
• Quality
• Value

Customer Rated

Oct 20, 2010

t of a bad connection in it, as I sometimes have to press on the outer cover right where it says "in flight voltage logger" to get it to work. Probably a bad solder job... If it wasn't for that, it would definitely be a five star review. Reply to this..

• Overall
• Quality
• Value

Customer Rated

Oct 10, 2010

I think it will help to improve battery life too.