Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Jumper 260 Plus Quad Copter (ARF)

Generating Links

Jumper 260 Plus Quad Copter (ARF)

Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
650000002-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

Jumper 260 Plus Quad Copter (ARF)

El puente 260 Plus cuadricóptero está diseñado con los entusiastas en mente. Este quad es ligero, con un alto rendimiento, por lo que es idea para el vuelo FPV o 3D realizar. Su instalación sencilla rapidez con la que se pone en funcionamiento y volando. También puede determinar el tren de aterrizaje que quiera con el tren de aterrizaje estilo blando o duro. El marco y los brazos están hechos de fibra de carbono fuerte. El kit viene con un kit de baja adicional en caso de que no desea añadir el engranaje de la cámara.

La junta central es una tarjeta de alimentación integrada con el controlador de vuelo integrada Naze32 dar una rápida respuesta fiable. Para FPV el kit viene con una cámara de 600 líneas de TV, con soporte ajustable, y el transmisor AV 5.8mHz 200mW. El tren de potencia comprende el ámbito 2804-2300KV motores con BlHeli 20A CES 6045 y hélices para darle un excelente rendimiento. Construido en LEDs que muestran el camino a seguir.

Este quad es una gran relación calidad-precio y le dará horas de entretenimiento y diversión.

caracteristicas:
• Potentes motores 2804-2300KV
• BlHeli 20A ESC, para una respuesta rápida, suave del acelerador
• 6045 Hélices (CW y CCW)
• Placa de distribución de energía y la electrónica intergraded controlador de vuelo (con conector XT60)
• Naze32 sistema de control de vuelo, micro procesador ARM de 32 bits de alta velocidad y respuesta rápida
• Controlador de Vuelo Cleanflight y Baseflight compatibles
• SBUS, método del receptor DSMX
• Viene con brillantes luces LED para indicar la orientación de un multirotor
• Construcción de fibra de carbono fuerte (placas de 2 mm, tubo de 15 mm para las armas)
• Tren de aterrizaje puede ser configurado para tanto el engranaje estilo blando o duro

Especificaciones:
Materiales: Marco de fibra de carbono (2 mm) y los brazos (tubo de 15 mm)
Distancia entre ejes: 260 mm
Control de vuelo: Naze32 (baseflight, cleanflight)
ESC: 20A BLHELI
Sin escobillas del motor: 2804-2300KV
Hélices: 6045 (2xCW y 2xCCW)
AV del transmisor (TX): 5,8 g / 200mW
Cámara: CMOS 600 líneas de TV, Visual ángulo de 120 grados
Adaptador de corriente: XT60
Dimensiones: 250x250x65mm
Peso: 340g (con el transmisor de la cámara y el receptor AV sin y la batería)

Incluido:
1 x 260 Jumper kit Plus
1 x Manual de instrucciones

Necesario:
1500-2200mAh batería 3S LiPoly
5-6 canal TX / RX
Googles FPV / pantalla

  • Jumper 260 ARF Quad
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Nam Kyu | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Aug 18, 2016

Hello, I bought it during the hot sale event at discounted price $50 recently. And had a chance to fly it outside. While assembly the parts, realized that the arm and body joint is not tighten using the screw. Though tighten the screw, the round arm cylinder was not fixed. I mean the arm cylinder turned around. However, the problem is my 3rd drone crashed to the ground on the 1st flight because the arm cylinder was rotated at max. throttle. The propeller, propeller bracket was broken and the arm cylinder was loosen. I think it has the problem from the design and that's reason sold it at discounted price $50. But, $50 is too expensive to pay for 3 minutes play. Crashed in minutes. On board controller and motors are looking good. but, there is a problem in the joint part btw. the body and arm cylinder. There are a lot of comment complaining that it's easy to be broken and need more repairing fees. Yes, it was correct and earnest comment. I should have heard that comment and didn't choose it. Please do not consider it as option. Strongly not recommended. target=_blank>Jumper 260 Plus Thanks, NamKyu

David | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Aug 09, 2016

Got on sale for nearly 1/4 of reg price. Flew one time and had severe oscillation. Motor mount is made from 2mm pcb and is very flimsy. One mount was cracked. Will require a new mount. Haven't tested FPV gear other than on the bench as I'm unable to fly waiting for parts.

Wolf62 | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jun 12, 2016

Love this quad. There are at least two build vids on it on the u-tube. I had a terrible time trying to get it to sink with my computer. Make sure the tiny dip switches by the usb hook up are correct. See you instruction pamphlet provided. I think it is 1,2 on, 3,4,5,6 off. "Jumper" is an accurate name. I had to tame mine down a bit. P.I.D sitting are as follows for mine, Lux Float, then change Roll to (P)1.8, (I)0.028, (D)35. Pitch to (P) 1.8, (I)0.028, (D)34 Yaw to (P)3.5, (I)0.40, (D)10. I had some trouble with the Yaw, as it seems a bit sluggish. I have flown mine with some rather big batteries , up to a 3 cell 3700mAh. Also, I got mine on sell and bought some extra parts. I suggest the hard plastic Landing gear until you get used to it, as I broke a motor mount.

MPradoG | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

May 03, 2016

I purchased this Quad a pair of weeks ago. At the begin, it's frustrating how poor the manual is. just a paper with a fair instruction about how to asemble it. No one hint or link to get the software needed to configure the controller. and the actual version of software does not match the instructions given at the basic 1 page manual. After a pair of days searching on the web, I have found software and drivers needed and I could configure controller. But unfortunately, given parameters don't give stability at all to the Quad. trying to land it softly, as soon as quad touches land, jumps about a meter or so... and then it stay touching and jumping... and if I cut throtle to land, quad touches and flip inverted broking props. I have quit after broke 5 sets of 4 props. Absolutely not good deal. (... and I'm not begginer in RC models, have more than 15 years on this)

Wolf62 | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Apr 19, 2016

JUMPER is a good name for this quad! I had to use "Lux Float" PID controller setting for cleanflight when I installed the after market props. ( I busted a lot of props as this quad will bounce on landing, and flip over. Now I remember to give full left rudder to shut it down as soon as it lands). To get Cleanflight to work, you will have to make sure and set the DIP switch to 1,2 on, 3,4,5,6 OFF, as per the instructions. For some reason I had to restart my computer also, after I installed all drivers. I suggest you install the "hard" landing gear first, until you get used to the Jumper, as the "light" gear does not add support to the motor mount. I have not tried FPV yet, as I am still getting used to it. I bought this on sale along with a bunch of replacement parts. This is my first race Quad, my other is the Quantum Venture. The Jumper has LOADS of power with a 3s Lipo. I have had problems with one fiber tube mount not tightening well, this the 4 crowns. The instructions could have been better. Other wise, so far, I am satisfied.

gutboy17 | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Nov 30, 2015

I started assembling the Jumper 260 and so far (1) of the LED connectors and the video camera connector on the integrated board have broken off. (1) of the LED connectors doesn't seem to be connected on the board as when the board is powered up that leg's LEDs don't light up. When I apply power directly to the leg's LED leads they illuminate. Everything else is working just fine. The quad is slightly on the sensitive side. I'm going to have to tone down the controls.

Archivos de clientes
No gimbal but camera w servo on channel Download [1527]
All electronics inside, servo for cam Download [1567]
Receiver Connection with Main Board Download [576]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios