Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global
  • USA

KB45-10XL 1200KV sin escobillas Inrunner

KB45-10XL 1200KV sin escobillas Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
600 g
SKU:
KB45-10XL
Descripción
del

KB45-10XL 1200KV sin escobillas Inrunner
Kv: 1200 rpm / V
Peso: 557g
Eje: 6mm
Tamaño: 77x45mm
Voltaje: 36v
mayor potencia nominal: 2880W
Este motor tamaño cabrá nuestra mayor de 5 pulgadas y 4.75inch EDF perfectamente. (agujeros de montaje mismo tamaño del eje Y)

Seguimos a la espera de la fábrica para los datos más detallados sobre estos motores y se actualizará este listado una vez que lo tenemos.

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    KB45-10XL
  • Brand:
    N/A
  • Peso ( g)
    600.00
  • Longitud
    143.00
  • Ancho:
    58.00
  • Altura:
    58.00
  • Kv (rpm / v)
    1200.00
  • Corrientes max (A)
    0.00
  • Potencia ( W ):
    2880.00
  • B Longitud ( mm ):
    77.00
  • Puede longitud D ( mm )
    75.00
  • Max Voltaje ( V )
    36.00
  • Un eje ( mm ):
    6.00
  • Unit Weight (g):
    557
  • C Diámetro ( mm )
    45.00
  • Longitud Total E ( mm )
    97.00
  • Resistencia ( MH ):
    0.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
ok gl birmotor ben bu motoru 13,5mm EDF fan ile kullandm. altrmadan nce konnektrleri kontrol etmenizi tavsiye ederim.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
first impresion not bad.however, the rotor when turned by hand rubs on the stator windings.this shows a total lack of quality control.now I'm wondering if it's worth reclaiming or not?I guess some you win ,some you lose.hobby king it's the first time you've let us down.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Powerful motor running smooth.

I'm giving it only 3 stars because the front bearing getting shot after less than 1 hour run.

My application is a very high reving hotliner.

Propeller balanced. I guess the rpm is what shot it.

Replaced the bearing, and had no further problems.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fahrenheit-145 6/24/2010 7:00:00 PM

I have 2 of this in my ISIKLAR-1mCAT,powered with 2x6S2P A123 and it runs 82km/h with 2 X457 Octuras.

This low RPM helps the motors to be efficient enough.

Our Tests with different boats,Cells and Props let us learn that more than 7SLiFe is to much for them.Running-Time lower than 6min.let him alive(because the Magnets are overheating and then he dies!!).

First time we think high RPM with lower Prop-Diam
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Otimo relaao custo beneficio. Um montro de motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very great Motor, i'm using it in an 1/8 scale MonsterTruck like the MGT8.0 with 12,2:1 gearing, very good torque, it does an wheely at 20km/h and has an Maximum Speed which is about 65km/h, plenty for an MonsterTruck in this scale! After an Ride with my 6S2P LiFePos (15mins) it has an approximative temperature of ~50C. But i recommend you to solder the 4mm connectors again! Because they are not very good solderd! 5Stars for that Price/Power!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi

I have problem with this motor. I measured Idle Current and Temperature.

Ic=12A

T= 65C

This is ok???
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
extremely powerful motor, put on 5" fan with 6s batt and has trmendous thrust, be sure to notch the shaft and secure the edf to it, my fan flew off it b/c of the power of the motor, and motor seems to get warm after a few seconds of static thrust but some after market cooling will fix that i think
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
test engine:

7 blade fan 4.inch

4000 mah bat 6s



watt meter:

82 AMP.

1680 watts.

ESC 100A K-FORCE. VERY GOOD ....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A good price performance fore this motor. I will drill some holes in the front and back for using in a 5 inch fan unit for more cooling effect.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.