KDA 20-40 15Encienda L sin escobillas Inrunner

• Overall
• Quality
• Value

KDA 20-40 15

Nov 14, 2007

Runs...



I tested it with the Hextronik 018 ESC, 2s Lipo (7,4V) and a Graupner Cam Prop with 4,7 x 2,4.



Before i run it, I opened it up. Yes, this is possible, just screw two M2,5 screws into the front motor shield and turn.



The motor has only one large magnet, the filling degree of the coppercoils is good. Be shure the motor is clean inside. I had some tiny glue crumbs between the coils and the magnet. Not much, the motor will work aswell with the crumbs.



The motor pulls about 10A and have about 30.000 rpm. It gets warm, about 40 to 50 C



For the german native speakers:



Ich habe den Motor mit einer Graupner Cam Prop Klapplatte 4,7 x 2,4 getestet. hierbei lief der Motor mit 2S Konion und einem Hextronikregler 018 mit ca. 30.000 u/min bei 10A



Aufgemacht habe ich ihn auch, das geht, indem man in das vordere Lagerschild zwei M2,5 Schrauben reindreht und dann das ganze Schild runterholt. Der Fllgrad der Kupferspulen ist gut. Der Magnet ist einteilig.



Subern sollte man ihn von innen auch, ich hatte ein paar kleine Krmel Kleber zwischen Spulen und Magneten. Er funktioniert auch mit den Krmeln



Der Motor wird warm, so ca. 40 - 50C, egal, ob nun mit oder ohne LSR.

• Overall
• Quality
• Value

2040-15L

Nov 14, 2007

Hi all



I use this motor in a little home made styro racer on a 2s 1300mah lipo pack (also UH) turning a 4.75x4.5 APC-E prop. Plane weight is about 400grams. Motor pulls 20A peak and 18.5A continious. Performace is stunning. The plane is lighter then with a speed 400 and 7 cells and power is a lot more.



Great motor for that price. When they are out of backorder I order another 3



Tom

• Overall
• Quality
• Value

KDA 20-40 15T sur MHZ Gecko

Nov 14, 2007

Mont dans un mini mono offshore Gecko, ce moteur m'a donn pleinement satisfaction ! Hlice K26 + lipos 3S2P 1800 mAh + variateur HXT 36, ca dmnage svre !!! Je le conseille sans hsiter :-)

• Overall
• Quality
• Value

KDA 20-40 15turnL GWS ME262

Nov 14, 2007

I had used a twin of this motors for my ME 262 of GWS ducted fan.

The ducted fan are the 64mm.

Whith poliquest 2000 3s 30C I had mesured 30 Amp (15A+15A).300wat of power.

A great performance , It is the perfect motor for 64 fan and at half price of oficial gws motor recomended.

• Overall
• Quality
• Value

KDA 20-40 15 Turn L

Nov 14, 2007

Tip Top dans une turbine Hyperflow 56 mm Great Plane.



J 'utilise ce moteur avec Un lipo Hobbycyty 1200 3s1p et un controleur HXT 018 , 35000 t/mn , ca pousse pas mal.

• Overall
• Quality
• Value

KDA 20-40 15L - Easy Star MPX

Nov 14, 2007

I installed this model on my EasyStar MULTIPLEX in place of the original PERMAX 400".

It is great. In combination with a 1300 mA Lipo 2 cells, it become possible to climb very fast.

The combination of superior performance and a competitive price makes these motor a great value.

I'll put another one (16L) on my easy glider Multiplex. Best to buy !