New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

KINGKONG 188 FPV que compite con aviones no tripulados Frame (Kit) (Negro)

KINGKONG 188 FPV que compite con aviones no tripulados Frame (Kit) (Negro)

Discontinued Product

Please continue searching for a similar product.
SKU:
426000040-0
WANT FREE SHIPPING? Click here to find out more!

KINGKONG 188 FPV que compite con aviones no tripulados Frame (Kit) (Negro)

El equipo Kinkgkong han salido con un excelente marco corredor FPV ligero. Su peso es de tan sólo 74 g para una distancia entre ejes de 188 mm.

El marco de nylon reforzado fuerte proporciona un marco rígido para las carreras. Viene con la posibilidad de montar la cámara FPV ya sea estándar o inclinada con una envolvente para su lente. Hay incluso una cámara de montaje en acción con amortiguación para que pueda capturar toda la acción. También empaquetado es un conjunto de hélices 4045 con un par de piezas de repuesto tirado.

El PCB tiene todas las conexiones para el CES de, el vuelo de la batería y equipo de FPV haciendo que se trata de una construcción limpia muy ordenado. También se incluye un enchufe simplemente la conexión de la parte trasera incluido frente super brillante luz LED.

Vamos a correr con este pequeño peso ligero, marco, de bajo costo.

caracteristicas:
• Chasis de nylon reforzado completamente moldeado
• montajes de doble cámara (cámara FPV y la acción de la cámara)
• Cámara FPV montaje se puede establecer como estándar o inclinada
• placa de distribución de alimentación (5V 1A con BEC)
• Módulo LED super brillante
• 4045 hélices (3 x 3 x CW y CCW)

Especificaciones:
AP BEC: 5V 1A
Distancia entre ejes: 188mm
Peso: 68 g

Incluido:
1 x 188 Kinkgkong kit de bastidor
Correa 1 x batería
1 placa de distribución de la energía de x
1 x tira de LED
3 x 4045 hélices CW
3 x 4045 hélices CCW
1 x Manual de instrucciones

Necesario:
4 x 1306 ~ 1806 Motors
4 x 6 CES ~ 12A
1 x 2 ~ 800 ~ 3S 1300mAh batería LiPoly
1 x Control de vuelo
5 ~ 6 canales de radio y el receptor
engranaje de FPV (opcional)

  • SKU (Número de Referencia) 426000040-0
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 224.0000
  • Longitud 165.00
  • Ancho 42.00
  • Altura 164.00
  • KingKong 188 Quad Frame
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

low plice, but Troubled in place.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

low plice, but Troubled in place.

Tough and durable little quad frame, east to build and fly

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tough and durable little quad frame, east to build and fly

Ok, back from the build experience - it's quite a challenge getting all the wires tucked in. I managed to mount the ESC's over the arms so that it gets some cooling. The bottom main frame was slightly warped, not an issues but just what to expect. I also noticed the LED housing when mounted pointing down at the back would slightly touch the ground causing the frame to pitch forward, not good during calib, also while landing, eventually it would break. So I have them mounted pointing up also used longer screws. The led's themselves are quite bright (mine are red). With 2300kv, 4045 stock props, 3S 30C, no FPV and CC3D settings for zmr 250, I have to say there was no tuning reqd, flew straight out, no twitching. But feels slightly underpowered, probably be better of with 3000 kv motors for this, or will have try 4045 BN props.

Very happy so far - I mean for this price what you get is incredible. Dont know the quality of the PDB and regulator onboard, time will tell. What I'm really happy is I didn't have to do any mods to put this together with std parts. Motors lack protection, so crashes will be bad.

Great one from HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok, back from the build experience - it's quite a challenge getting all the wires tucked in. I managed to mount the ESC's over the arms so that it gets some cooling. The bottom main frame was slightly warped, not an issues but just what to expect. I also noticed the LED housing when mounted pointing down at the back would slightly touch the ground causing the frame to pitch forward, not good during calib, also while landing, eventually it would break. So I have them mounted pointing up also used longer screws. The led's themselves are quite bright (mine are red). With 2300kv, 4045 stock props, 3S 30C, no FPV and CC3D settings for zmr 250, I have to say there was no tuning reqd, flew straight out, no twitching. But feels slightly underpowered, probably be better of with 3000 kv motors for this, or will have try 4045 BN props.

Very happy so far - I mean for this price what you get is incredible. Dont know the quality of the PDB and regulator onboard, time will tell. What I'm really happy is I didn't have to do any mods to put this together with std parts. Motors lack protection, so crashes will be bad.

Great one from HK.

First up, the frame feels overall on the upper side of quality. The material looks quite good for the price. Some issues already mentioned by others such as center standoff getting in the way of FC. Also the space between the PDB and frame bottom side is not enough to hide the ESC's, forget it. Other than that, the PDB itself is pretty ok - you have multiple solder points for VCC, and 5V o/p's for powering the FC and LED (nice addition). An important thing to note is it provides both 5v and 12v along the video connection points front and back, which is a great feature. I still haven't flown this one yet, but it looks promising. Hope there wont be too much flex. It will always be a tight fit with FPV gear, but should be achievable. Overall a great value-frame from HK. Hope it flies just the same.
Will come back and update sometime.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First up, the frame feels overall on the upper side of quality. The material looks quite good for the price. Some issues already mentioned by others such as center standoff getting in the way of FC. Also the space between the PDB and frame bottom side is not enough to hide the ESC's, forget it. Other than that, the PDB itself is pretty ok - you have multiple solder points for VCC, and 5V o/p's for powering the FC and LED (nice addition). An important thing to note is it provides both 5v and 12v along the video connection points front and back, which is a great feature. I still haven't flown this one yet, but it looks promising. Hope there wont be too much flex. It will always be a tight fit with FPV gear, but should be achievable. Overall a great value-frame from HK. Hope it flies just the same.
Will come back and update sometime.

Customer files
satkk188 Download [331]
protocol's kingkong 188 Download [223]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save