Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

L-39 Albatros EPO 90mm Jet ARF (n Servo)

L-39 Albatros EPO 90mm Jet ARF (n Servo)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
5480 g
SKU:
L-39-ARF

Combine

essential items and
esc
battery
servo
Descripción
del

El L-39 Albatros fue desarrollado en la República Checa como un ataque ligero y aviones de entrenamiento. Se cree que aproximadamente 2.800 de la nave aérea Albatros L-39 todavía están en servicio en la actualidad.

Con una unidad de EDF grande de 90 mm y de gran alcance 3660-1600kv sin escobillas Inrunner con rejillas de ventilación de este gran escala de EPO chorro sonará tan bueno como parece. La unidad de EDF 6 cuchilla viene con el motor pre-instalado para una fácil instalación. Se requerirán 5 x 9g servos par 1.8kg pasadas de las superficies de control y la rueda de nariz orientable. Los trenes de aterrizaje fijo también incluyen la suspensión de trabajo y se suma a la mirada de escala y la sensación del L-39. Se requerirá un 4400mah 22.2V 6s Lipo y su propio transmisor y el receptor (Tx / Rx) para completar el modelo. Terminó en un esquema de color auténtico de la Fuerza Aérea República Checa, el L-39 Albatros hará una adición impresionante a sus squadren de combate.


Especificación:
Envergadura: 1192mm
Altura: 405 mm
Longitud: 1.520 mm
Área de ala: 35dm2
Perfil aerodinámico: RG-14
Unidad de EDF: 90 mm ​​- 6 cuchilla (Incluido)
Motor: 1600KV sin escobillas Inrunner (Incluido)
Servo: 5 x 9 g (Obligatorio)

Necesario:
ESC: 60A
Batería: lipo 22.2V 4400mAh 6S
Servo: 5 x 9 g
Su propia Tx / Rx

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    L-39-ARF
  • Brand:
    N/A
  • Peso ( g)
    5480.00
  • Longitud
    930.00
  • Ancho:
    295.00
  • Altura:
    610.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
My order called for EPO foam. However what I received was not in my opinion EPO as the paint came off with every scrape and ding. I added servos for the flaps and routing them out sure did not feel like working with EPO foam. They should include some touch up paint to take care of the paint removal which will definitely occur when assembling the model
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is my first 90mm jet and it's very nice! I posted a vid in the vid section for the chinese warehouse version that's plug and play. I'm the one w/the sunglasses setting it up in the beginning ;)

The wing spare is a nice feature as well as the EPO. Flight characteristics are pretty good too, even though it doesn't have a rudder or flaps. I got the Hobby top gun/Flyfly retracts here at HK too (EXCELLENT PRICE!!!!) and they work surprisingly well for 45 bucks1!!!!

The stock motor combo works well, just make sure it's fairly balanced. I simply used hot glue and duct tape on the rotor to get the main resonance out. And DO NOT use high timing on the motor. I did that in the vid and the reason why i couldn't taxi back was because the motor burned out and melted the shroud. Like almost all inrunner EDF setups, it's safer to use low timing w/the exception of those built for higher timing like RClander stuff.

There are some things to be aware of in terms of the landing gear, which was the worst part of the plane. The strut posts that came were pretty good but kept bending, especially the nose one because it wasn't case hardend. So I drilled the holes in the retracts and landing gear a little bigger and just used some fat case harded bolts from a hardware store and they work way better.

Doesn't like to handle slow speeds as well, especially when there's wind that's not a headwind,
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
EDF plane. . EDF 5s. Thrust 1.5 . 4 .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome right out of the box, pulled 58 amps on a turnigy 6s 2.65 batt and flew great. Switch over to a ARC 36/75/1 and wemo minifan pro 90mm. WOW disappears straight up in a matter of seconds :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is my first EDF plane, so I didn't know what to expect. Very pleasantly surprised, the flight characteristics are very good, plane handles like a dream. The stock motor on 6S is ok, but a little more power would be nice.

I run it on a Turnigy 5000Ma 6S 20C pack, after a 3 min flight it uses 3/4 of the pack, at the high altitude i'm at I need to fly it mostly at full throttle. The motor tested just over 900 Watts static, more like 1400-1500 would be desireable.

I recommend it, but you should have a good bit of building experience before trying to tackle this one.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Albatros Reno paint job download now [93kb]

Combine

essential items and
esc
battery
servo

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.