New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Laser230 Kit compuesto Drone FPV (230mm)

Laser230 Kit compuesto Drone FPV (230mm)

Shipped From:
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

20,76 €
Estado:
En stock
SKU:
366000017-0
WANT FREE SHIPPING? Click here to find out more!

El Laser230 es una construcción 230mm avión no tripulado árbol que abraza todas las carreras FPV compuesto. El Laser230 tiene lo que se llama un sistema limpio y sucio, que utiliza dedales de vibración para aislar el motor y el pilar de la vibración de la FC y la cámara. El sistema limpio y sucio le permite ejecutar más apretado de PID y tener una sesión de video FPV libre de gelatina.

El soporte motor brazos de montaje de 16x19mm y 12mm de separación. El tamaño máximo es de 5 pulgadas puntal y perfecto para los motores de clase 1704 ~ 2206. La construcción compuesta duradera viene con muchas disposiciones para el montaje y correas, por lo que instalar un broche de presión. El marco tiene 8 dedales de vibración para el aislamiento, así como una nueva cámara FPV prospectivas se montan entre los marcos. El Laser230 tiene algunas apariencia elegante con separadores de aluminio anodizado de color rojo calientes y un acabado mate fresco, haciendo de este un gran pequeño quad de recorrer su sitio local de vuelo.

caracteristicas:
• Construcción mixta
• Amplia gama de opciones de motor y potencia
• Gran marco de aislamiento de vibración secundaria para tener más espacio y el diseño más fácil
• Tamaño compacto para la proximidad volar alrededor de obstáculos

Especificaciones:
Distancia entre ejes: 230mm
Peso: 180 g
Altura: 82 mm con tren de aterrizaje y la jaula centro

Necesario:
4 x Motors 1506 ~ 2208
1 batería de 1300mAh 800 ~ 7.4 ~ 11.1V (2 o 3) células LIPOLY
4 x Hélices de hasta 5º en
7 ~ 4 x 12A de la ESC
1 x controlador de vuelo del Multi-rotor
de radio de 4 canales (6 canales recomendada para FPV y el uso FC)
engranaje de FPV (opcional)

  • SKU (Número de Referencia) 366000017-0
  • Brand Other
  • Capacidad ( mAh ) -
  • Peso 247.0000
  • Longitud 210.00
  • Packaging Width 30.00
  • Altura 100.00
  • FPV250 Low Hung
  • Added heli landing gear to offer the battery some protection.
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

good frame for the price. flies well but a bit heavy (180g)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good frame for the price. flies well but a bit heavy (180g)

Frame seems sturdy for composite structure and leaves some room for modification. However 5" propose are very tight fits, don't think you can put 6" somehow on this thing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Frame seems sturdy for composite structure and leaves some room for modification. However 5" propose are very tight fits, don't think you can put 6" somehow on this thing.

Not a bad frame at all, great price too. There is no instructions but, it is really straightforward. I am concerned about the arm mounts at it is only 2 screws holding it, may break the arm in a crash. I have not seen any replacement parts for this one anywhere.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not a bad frame at all, great price too. There is no instructions but, it is really straightforward. I am concerned about the arm mounts at it is only 2 screws holding it, may break the arm in a crash. I have not seen any replacement parts for this one anywhere.

Excellent frame. No complaints at all. Highly recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent frame. No complaints at all. Highly recommended.

Okay, This frame is cheap and looks good. But out of 2 sets of motors only one fits. spacing on mounts fit multistars but not emax. 1806 motors cant Clear the bottom plate of the frame while on flight. i would not get this again i enjoy my fov250 and Qav 250 more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Okay, This frame is cheap and looks good. But out of 2 sets of motors only one fits. spacing on mounts fit multistars but not emax. 1806 motors cant Clear the bottom plate of the frame while on flight. i would not get this again i enjoy my fov250 and Qav 250 more.

Good value and quality is nice however the clean/dirty design is a fatal weakness. Any minor crash results in separation of the two parts which will likely snap a few of the ESC wires too.

Nice idea but I'm going to replace the frame with a carbon mini-blackout clone.

As a side note mine weighed in at 550g with 3S2200mah and FPV gear (but no gopro/mobius). Feels a bit slugish with 1806-2300kv.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good value and quality is nice however the clean/dirty design is a fatal weakness. Any minor crash results in separation of the two parts which will likely snap a few of the ESC wires too.

Nice idea but I'm going to replace the frame with a carbon mini-blackout clone.

As a side note mine weighed in at 550g with 3S2200mah and FPV gear (but no gopro/mobius). Feels a bit slugish with 1806-2300kv.

high quality, nice design.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

high quality, nice design.

Ok bought this to just have something better than the FPV250 sold here with the one solid frame for like 9 bucks. It's a nice frame clean all the bolt holes lines up and lots of hardware to. It is a little heavy but then it's a 4 plate frame, I was able to place my 12amp escs between the botom 2 plates for a nice clean look . The arms are a little weak but not broke them just can bend them some but its a good looking and feels as good as some of my more expensive frames . The rubber grommets holding the bottom fraam to top half are a little soft and loose so make sure use small zip ties to keep it from popping apart on crash or in flight. I placed a CC3d flight board on mine with Sunnysky 2204-16 2300kv motors and 12amp escs 5030 tri props and std props with a Mobus cam and 700tvl fpv camera and 250watt Bosscam transmitter and 1500 25/50c batt total weight loaded is 630 grams. flies 7 minutes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok bought this to just have something better than the FPV250 sold here with the one solid frame for like 9 bucks. It's a nice frame clean all the bolt holes lines up and lots of hardware to. It is a little heavy but then it's a 4 plate frame, I was able to place my 12amp escs between the botom 2 plates for a nice clean look . The arms are a little weak but not broke them just can bend them some but its a good looking and feels as good as some of my more expensive frames . The rubber grommets holding the bottom fraam to top half are a little soft and loose so make sure use small zip ties to keep it from popping apart on crash or in flight. I placed a CC3d flight board on mine with Sunnysky 2204-16 2300kv motors and 12amp escs 5030 tri props and std props with a Mobus cam and 700tvl fpv camera and 250watt Bosscam transmitter and 1500 25/50c batt total weight loaded is 630 grams. flies 7 minutes.

I've bought a Laser230 and I disappointed with it. 5X3 propellers can't fit of this frame the arms are shorter than normal. I made new arms for this but now it looks like a mule. I'm looking for a proper 250 size frame somewhere.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've bought a Laser230 and I disappointed with it. 5X3 propellers can't fit of this frame the arms are shorter than normal. I made new arms for this but now it looks like a mule. I'm looking for a proper 250 size frame somewhere.

The kit is OK and despite the arms being of the same, fairly thin material as the rest, my quad with "Baby Beast" motors and HK carbon 5030 props survived a pretty impressive scratch with no damage at all. The vibration dampening design is a joke though. Make the frame rigid by using nylon bolts & spacers through the 8 bolt holes next to the dampening balls instead or you get crazy shakes. Dampening is only needed for a small camera platform. For the money, it is great choice though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The kit is OK and despite the arms being of the same, fairly thin material as the rest, my quad with "Baby Beast" motors and HK carbon 5030 props survived a pretty impressive scratch with no damage at all. The vibration dampening design is a joke though. Make the frame rigid by using nylon bolts & spacers through the 8 bolt holes next to the dampening balls instead or you get crazy shakes. Dampening is only needed for a small camera platform. For the money, it is great choice though.

  1. 1
  2. 2
Customer files
laser230 pdb Download [1597]
Laser230 RTF Download [1283]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save