Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

Micro GT-1 RTF w / 5A sin escobillas (Plug-n-Fly)

Micro GT-1 RTF w / 5A sin escobillas (Plug-n-Fly)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
611 g
SKU:
GT-1
Descripción
del
El micro GT-1 viene el 90% de pre-construcción y dispone de motor, ESC y servos necesarios para completar.
Este pequeño avión linda incluye un micro motor sin escobillas outrunner y 5A esc también requerida es de 2 servos 2.5g.
Sólo tiene que añadir una lipo 200mAh 2S estar lista para volar en una noche.
Presupuesto:
Longitud: 328 mm
Envergadura: 400mm
Peso del vuelo: 95-110g
Motor: outrunner C05 3700kv sin escobillas
ESC: 5A / 2S
Objeto: 4 pulgadas
Servos: 2x2.5g (no incluido)
Batería: 7.4V 200mAh Lipo 2S (no incluido)
Necesario:
Su propia TX y RX
7.4V 200mAh Lipo 2S
2 x 2,5 g
Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    GT-1
  • Brand:
    N/A
  • Capacidad ( mAh )
    No
  • Peso ( g)
    611.00
  • Longitud:
    450.00
  • Ancho:
    110.00
  • Altura
    150.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Great light plane for sub-micro reciver instalation :). The included ESC regulator is programable, however programing manual is not included or downloadable :( .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this as an indoor plane but found it way too fast for our hall, however I've had a ball flying it at parks & at the club. I find it handles a bit of wind too.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i got two of these. made one so far. had trouble finding the CG. the stock prop sucks. soft foam, but looks great and a great value for the price. the motor needs some extra cooling holes. this is the acro bipe that was all the rage converting a few years back. if you get an upper wing with a twist in it, think twice about 'fixing' it. i had a twins in mine and 'fixed' it flat, but the plane has a severe torque roll to it. the twist in the wing would have helped. not sure if this is intentional or not, but i have seen on RCgroups a simular thing happen.

this is not a plane for a beginner build. beginner flyer yes, but beginner builder, no.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Didnt like, Motor shaft bent as supplied, it was replaced with piano wire same guage. Rudder hinge sloppy, it also needs hinging to the body at the bottom. Prop adaptor, throw it away and fit a 1.5 mm prop saver, if you don't have one then wind a strip of drink can twice around the prop shaft and use a 2mm prop saver.

Flying is good and will cruise level flight at 1/3 throttle, on full throttle will go verticle on a lighter build than mine, test fly outside.

Setup, rudder /_ 5mm, Elevator /_ 5mm, C.G.approx 9mm behind lower trailing edge, good starting points.

As built, flying weight 87g, battery 360mah (22g), Reciever 6g, servo 2x3.5g. I can easily save 12 g with a change of servos rec. and battery.

Tip, covering the tailskid with fuel tube helps stop ground loops.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Following all of the reviews and discussions I took care to make sure the wings were aligned properly. I also unscrewed the motor from the mount and drilled out cooling holes in the firewall so the motor could breath. Using linear servos, I then built a 4 servo aircraft. 2 servos to control the 4 ailerons/flaps, one for rudder, and one for elevator. Even after that the total weight with battery and reciever was still only 70 grams. I don't know why the flying weight is listed at 100 grams. It's nowhere near that heavy. The provided motor/prop combo gives it about 60 grams of static thrust. The plane is NOT RTF. The whole airframe has to be assembled and the control linkages have to be built. All of the required building material is included to make it a 2 channel rudder and elevator controled plane. But the only electronics included are the motor and esc.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wing markings are not correct. After connecting the wings to the designated positions.... they were not aligned.

First flight... sloppy... pulled sharply to the left probably because of the wings. Also... no way to mount the lipo outside. If you mount the lipo inside... you have to rechage it for a second flight. No opening in the

canopy for switching lipos.



buy something else
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little plan, take your time to get wing lined up, it can be hard to fix if not done right the first time.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
gli ho messo due micro servi nelle ali da due grammi, uno al direzionale ed al profondit di 3,7,devo decidere per l'apertura, ma penso di incollare tutto e ricavarla nella capottina per accedere anche ai servi,invier foto
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Be careful mounting the upper wing. The preassembled struts are off. The motor burned out after 15 seconds of full power on a 7.4V 2S 240mah Lipo. The motor cooling is completely blocked off by the mounting plate. My 2nd attempt will be to use a smaller battery, 200mah, and open up the mounting plate for some cooling.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received 6/8/2010. Package in good shape. No servos. Some places say includes servos, some places say 2 servos needed. One wing sturt connection point in wrong place, easy to correct. Stablizer connection piece not on straight,not easy to correct. Shoddy workmanship, probably will have to replace stab, very hard to remove to replace.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.