New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Mini intruso A-6 EDF del avión de combate de EPO (PNF)

Mini intruso A-6 EDF del avión de combate de EPO (PNF)

Shipped From:
  • USA
Discontinued Product

Please continue searching for a similar product.
SKU:
A6-EDF-PNF
WANT FREE SHIPPING? Click here to find out more!

El intruso A-6 fue diseñado como un avión de ataque de tierra todo el tiempo y fue el reemplazo de chorro para el legendario Douglas Skyraider, que ha tenido una distinguida carrera, que abarca 4 décadas. Este mini A-6 está hecha de espuma EPO accidente resiliant que includeds 3 servos 9g x, ESC 20A y un mini vez poderosa 50mm ventilador de la unidad de motor EDF y todos los pre-instalado. Todo lo que se requiere para terminar el modelo es su propio transmisor / receptor (Tx / Rx), un 3S1P 850mAh Lipo y alrededor de 45 minutos de tiempo de construcción.

Especificación:
Envergadura:
585mm
Longitud: 696mm
Volar Peso: 345 g
Motor: Potente outrunners
ESC: 20A
Servo: 9g 3 x
EDF: 50mm
Batería: 850mAh 3S 11.1V 20C (no incluido)

Necesario:
Su propia Tx y RX
Batería: 850mAh 3S 11.1V 20C

  • SKU (Número de Referencia) A6-EDF-PNF
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 1379.0000
  • Longitud 650.00
  • Packaging Width 115.00
  • Altura 335.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Hello
Mini Jet trs sympa, plane trs bien malgr le didre invers.
Ncessite du dual rate sur les commande, car devient facilement incontrlable.
Je l'ai crash 2 fois, et rpar 2 fois, Modle trs solide, idal pour temps peu venteux.
Attention la place pour votre rcepteur. Modle facile monter (compter 40min max)

Finalement : Agrablement surpris par ce petit modle, 3 4 vols pour le prendre bien en main.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hello
Mini Jet trs sympa, plane trs bien malgr le didre invers.
Ncessite du dual rate sur les commande, car devient facilement incontrlable.
Je l'ai crash 2 fois, et rpar 2 fois, Modle trs solide, idal pour temps peu venteux.
Attention la place pour votre rcepteur. Modle facile monter (compter 40min max)

Finalement : Agrablement surpris par ce petit modle, 3 4 vols pour le prendre bien en main.

Already had the F35 from this range so o bought the a6 as well! wings were a bit bent and slightly warped so I got everything straight and true before starting to put it all together, just did it with finger and thumb pressure no heat gun or steaming 1000 Mah Lipo right to the front of the cockpit and c/g was right on the button. Ailerons set to 60 pcnt and Elevator on 50pcnt throws gave good balance of the controls really good feel around the sky rock solid even in inverted without needing to hold in down trim!. hand launched on full power she started climbing straight away no stall or wing drop pretty quick around the sky and could slow right down without the dreaded tip stall but keep it straight and level and turn gentle at slower speeds or it will drop a wing just like any plane does. overall superb I would have another if this one dies.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Already had the F35 from this range so o bought the a6 as well! wings were a bit bent and slightly warped so I got everything straight and true before starting to put it all together, just did it with finger and thumb pressure no heat gun or steaming 1000 Mah Lipo right to the front of the cockpit and c/g was right on the button. Ailerons set to 60 pcnt and Elevator on 50pcnt throws gave good balance of the controls really good feel around the sky rock solid even in inverted without needing to hold in down trim!. hand launched on full power she started climbing straight away no stall or wing drop pretty quick around the sky and could slow right down without the dreaded tip stall but keep it straight and level and turn gentle at slower speeds or it will drop a wing just like any plane does. overall superb I would have another if this one dies.

I had bought the mini T 45 which was excellent and flew great. Bought this one and what a different model !! Wings bent, every cover (for elevator servo/receiver, motor cover) bent. Not good quality to say the least. Anyhow went ahead and built it. Motor was way out of balance so had to balance and centre it. No problem launching the model but what a load of rubbish !! Must keep full power otherwise it will stall really quickly, after 2 crashes it was obvious the model was just unstable regardless of c of g or battery used - tried 850Mah and 1300Mah. If full power kept on and VERY easy turns especially downwind then flights were possible. Not recommended I am afraid. Must do better HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had bought the mini T 45 which was excellent and flew great. Bought this one and what a different model !! Wings bent, every cover (for elevator servo/receiver, motor cover) bent. Not good quality to say the least. Anyhow went ahead and built it. Motor was way out of balance so had to balance and centre it. No problem launching the model but what a load of rubbish !! Must keep full power otherwise it will stall really quickly, after 2 crashes it was obvious the model was just unstable regardless of c of g or battery used - tried 850Mah and 1300Mah. If full power kept on and VERY easy turns especially downwind then flights were possible. Not recommended I am afraid. Must do better HK.

Well, mine arrived with bent wings and stabilizers, one wing bent up and one bent down. To make it a bit more tricky, the wings were as well twisted. Didn't dare to try flying. However this can be fixed easily using steam. Just hold the parts over cooking water and bend into the desired direction, let it coll down 10-20sec and relieve. Be careful and do many small steps until finished. Looks good now and anyway, for that price I paid Engine, ESC and servos, the EPO parts were free anyway.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well, mine arrived with bent wings and stabilizers, one wing bent up and one bent down. To make it a bit more tricky, the wings were as well twisted. Didn't dare to try flying. However this can be fixed easily using steam. Just hold the parts over cooking water and bend into the desired direction, let it coll down 10-20sec and relieve. Be careful and do many small steps until finished. Looks good now and anyway, for that price I paid Engine, ESC and servos, the EPO parts were free anyway.

I love this plane. Its not mega powerful on stock set up but it has enough power to be enjoyable. People have said it is difficult to launch. Just keep the plane straight until you are up to speed. Naturally the plane will drop out of the sky if you are going too slow.

Once you are safely in the flight envelope this plane will not give you any problems. I could fly it for hours.

You don't need much rates at all. Its only a small plane so the control surfaces have plenty of influence. I think I use about 60pcnt.

What a bargain for the price!! Thank you Hobbyking

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I love this plane. Its not mega powerful on stock set up but it has enough power to be enjoyable. People have said it is difficult to launch. Just keep the plane straight until you are up to speed. Naturally the plane will drop out of the sky if you are going too slow.

Once you are safely in the flight envelope this plane will not give you any problems. I could fly it for hours.

You don't need much rates at all. Its only a small plane so the control surfaces have plenty of influence. I think I use about 60pcnt.

What a bargain for the price!! Thank you Hobbyking

Habe meine A-6 letzte Woche bekommen.

Betreibe sie an einer 6 Kanal Anlage und habe die Querruder auf einzelnen Kanlen mit Mixer kombiniert. Zustzlich habe ich die Querruder als Flaps reingemixt. Die Aussentanks habe ich weggelassen, werde sie aber vielleicht mal mit doppelseitigem Klebeband dranmachen. Schwerpunkt ist 139mm von der Nase, und wenn der Akku in der vorgesehenen Aussparung vorne, und der Empfnger im Heck beim Hhenruderservo ist, passt er genau.

Der Erstflug war problemlos - Flieger mit Kraft wie ein Dartpfeil geworfen (ohne Flaps, da sie sonst zu lagsam wird und abschmiert) und er fliegt fast von allein. Schub ist OK aber nicht berauschend. Landung mit Flaps - dann verliert sie ohne Schub auf 10m Flug ca. 1m an Hhe.

Fazit: kein rasanter Jet, aber fr Impelleranfnger sehr zu empfehlen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Habe meine A-6 letzte Woche bekommen.

Betreibe sie an einer 6 Kanal Anlage und habe die Querruder auf einzelnen Kanlen mit Mixer kombiniert. Zustzlich habe ich die Querruder als Flaps reingemixt. Die Aussentanks habe ich weggelassen, werde sie aber vielleicht mal mit doppelseitigem Klebeband dranmachen. Schwerpunkt ist 139mm von der Nase, und wenn der Akku in der vorgesehenen Aussparung vorne, und der Empfnger im Heck beim Hhenruderservo ist, passt er genau.

Der Erstflug war problemlos - Flieger mit Kraft wie ein Dartpfeil geworfen (ohne Flaps, da sie sonst zu lagsam wird und abschmiert) und er fliegt fast von allein. Schub ist OK aber nicht berauschend. Landung mit Flaps - dann verliert sie ohne Schub auf 10m Flug ca. 1m an Hhe.

Fazit: kein rasanter Jet, aber fr Impelleranfnger sehr zu empfehlen.

Put in a Turnigy 800ma battery and checked balance which was spot on. Give it a good healthy throw and it is a great little flyer. Great fun!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Put in a Turnigy 800ma battery and checked balance which was spot on. Give it a good healthy throw and it is a great little flyer. Great fun!

Many people ask for CG.
I have read on RCGroups that CG is 139mm from the air intake.
I have tested this is OK.
The most difficult is hand launch but after that it flies well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Many people ask for CG.
I have read on RCGroups that CG is 139mm from the air intake.
I have tested this is OK.
The most difficult is hand launch but after that it flies well.

Required:

Your own Tx & RX

Battery: 850mah 3S 11.1V 20C

I did not get a remote control and battery, is it true

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Required:

Your own Tx & RX

Battery: 850mah 3S 11.1V 20C

I did not get a remote control and battery, is it true

Bought mine with 3 of the Zippy 800mah. Great plane flys stable but must double check the CG.... Read all the reviews and nose heavy is better and I didn't fly with the drop tanks.... So when CG and trim is right its a fun plane to fly..... Wings come worpped it of the box but nothing trimming can't fix...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought mine with 3 of the Zippy 800mah. Great plane flys stable but must double check the CG.... Read all the reviews and nose heavy is better and I didn't fly with the drop tanks.... So when CG and trim is right its a fun plane to fly..... Wings come worpped it of the box but nothing trimming can't fix...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
batery fit perfect Download [114]
fan Download [114]
very cool Download [115]
Construction A6 Download [1426]
Construction A6 Download [561]
No File Name Download [335]
No File Name Download [326]
A-6 all finished Download [332]
Nice Plane Download [2708]
Nice Plane Download [2708]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save