Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Mini distribuidor de energía DP BEC

Generating Links

Mini distribuidor de energía DP BEC

Precio:

Now save ahorra 0,00 € 0,00 €

75,94 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
373000009-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

Min Potencia Distribuidor UBEC apropiado para los modelos de 30 cc, más impulsados ​​por gas.

Esta unidad tiene grandes características, que incluyen: entrada de batería dual, 5v aislado lineal RX BEC, 20 Amp voltaje ajustable UBEC en todos los canales de salida, 8 canales de entrada RX con dos salidas en cada canal - la simplificación de las superficies de control de doble servo.

Grandes inclusiones son el regulador de 5V lineal independiente que proporciona una fuente de alimentación independiente para el receptor, aislamiento óptico CDI y en la matanza de encendido remoto incorporado. las fuentes de alimentación del receptor, servos y CDI están completamente aislados unos de otros.

Este es el primer sistema distribuidor de energía para anidar el receptor dentro de la distribución de energía "bloque" acortando así los tendidos de cable, la adición de protección a su receptor importante de todo el exceso de velocidad y el tiempo de configuración de forma segura.

caracteristicas:
• 5v lineal RX BEC
• 20 amperios Servo UBEC
• Los usuarios de voltaje ajustable UBEC
• 8 (1) de corte CDI canales de entrada
• 16 canales de salida
• LEDs de estado de verificación 5
• Bandeja receptor acolchado y Montaje seguro
• La potencia CDI aislado
• CDI de control de encendido remoto (corte a distancia)
• CDI luz indicadora de estado de la fuente
• CDI terminal de salida de potencia
• Monitor de tensión CDI LED

Opcional: Display de tensión de entrada / salida con interruptor de alimentación externa

Especulación:
Los canales de entrada: 8 (1) de corte CDI
Canales de salida: 16
Voltaje de entrada: 6V-13V
Servo UBEC actual: 20A (30Amp Ráfaga)
Voltaje de salida: 4.8-9.7V (ajustable por el usuario; por defecto es 5.2V)
De potencia RX: BEC lineal 5v
Temperatura de trabajo: -20 a 85 grados C
Peso: 80 g
Dimensiones: 116mm x 88mm x 13mm

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

J.A. | Comprador verificado

  • Overall
  • Quality
  • Value

Good, but be careful

Dec 21, 2018

A very nice device. But it involves a potential danger: the 5V power supply to the receiver has only 1A. This is just enough for the receiver and the internal ignition switch. But it is not enough for powering any other device from the receiver. I tried it: already with 1 servo the voltage-drop causes the receiver to stop working. So: DO NOT CONNECT ANY EXTRA DEVICE (Servo, ESC, SBUS Decoder etc.) TO THE RECEIVER!!
But there is a “workaround” if you want to connect additional devices: use the 20A power supply and to achieve that you have to do the following:
- disconnect both (!) red wires from the servo-connectors ;
- take a short female-female Futaba-lead and remove the black (ground) and white (signal) wires completely;
- take, on 1 side, also the red pin out of the connector and put this pin into the middle (!) position of one of the servo connectors;
- put the other side of the servo-lead into one of the (double) servo slots.
I did not cut away the two loose red wires but did put a shrink wrap over the pins. By doing that it is possible to bring the power supply back to its original state eventually.

Douglas | Comprador verificado

  • Overall
  • Quality
  • Value

Almost the same as the yellow one.

Oct 17, 2017

The only difference I can see between this one and the yellow one is that this has 20A bec and the yellow has 30A bec. Then why is this more expensive?? I don't know, maybe cuz black is "cooler"..?? Works great for me, dual battery supply, adjustable bec voltage, I set mine to 6v. Easy to set with a simple voltage meter. It would be nice if it had led V display, but that would add more $ and not really neccessary, imho. I will get another for my next 30cc bird, maybe the yellow one, but I don't really need 30A bec!

Jorge | Comprador verificado

  • Overall
  • Quality
  • Value

Question

Jan 21, 2017

Excuse my ignorance Which batteries do you recommend for use with 8 standard servos?
Thanks :)

michael | Comprador verificado

  • Overall
  • Quality
  • Value

NO MORE POWER PROBLEMS EVER AGIN!!!!!

Dec 15, 2016

i have this ajustable power distributer in all my planes its the CATS MEE-OUH !!! TWINN BATTERY ADJUSTABLE POWER THERE OUT THERE FOR A HECK OF ALOT MORE$$$$$$ LIKE TWICE THIS PRICE. GET ONE AND YOU WILL NEVER HAVE A POWER PROBLEM AGIN !!!! FROM THE AVIATER UNCLE MIKE IN MENDOCINO CALIF

Patrick.Jurek@al | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 13, 2015

Gute Akkuweiche Funktioniert super fr ganz kleines Geld.

Benutze Sie in einer 2,70m Extra mit 10 Servos auf 8,4 Volt

DrifterTR | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 26, 2015

It is the best product for power distribution. Going to use on 1/4 piper cub

Archivos de clientes
Altimètre.pdf Download [558]
german manual Download [13]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!