v1.1 minim OSD

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 24, 2015

Great OSD! Fully customizable and programmable. Great value for the price and quality. All fans of flying first person - I recommend.

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 24, 2015

good OSD, great quality as always

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 18, 2015

Good quality.

Works immediately.

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 14, 2015

These things are amazing. Someone even figured out how to get FrSky telemetry on this.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 21, 2015

OSD works a treat with APM 2.6. Update the firmware with a ftdi and you have a good osd.

• Overall
• Quality
• Value

Certified Buyer Rated

May 21, 2015

Cheap and powerful, these will connect to the Naze32, MultiWii, APM, and Pixhawk. Out of the three I've bought, one has succumbed to a voltage spike. This was most likely caused by a crash and not a defect in the product itself. In general, I'm very happy with these.

• Overall
• Quality
• Value

Customer Rated

May 08, 2015

bought this osd to go with my first MultiWii.

though not setup out the box to work with MW boards (set for APM & PIXHAWK standard) theres tons of simple info and advice available all over the place and as this OSD is long established there are many available firmwares to suit just about any FC out there, Took a noob like me half an hour to flash new firmware via a Ftdi adapter and configure the display before I was out and in the air with my new OSD working a treat. WORTHY OF NOTE(as not mentioned here).... The V1.1 and newer versions DO NOT suffer the same overheat failures that the earlier versions did so the 12v side of the board can now be happily fed with a 12v feed (as was intended)

• Overall
• Quality
• Value

Certified Buyer Rated

May 05, 2015

??????????? ????? ? ???? ???????= ???????? - ??? ???????? ) ?????? ????? ?????? ? ?? ??????? ) ??? ?????? ???????? ) ?? ?????????????? ???????? ???????????? )

• Overall
• Quality
• Value

Customer Rated

Mar 29, 2015

Very nice Osd with an awesome price! You can have all the information from this little board but be careful if you are a newbie because it requires some skill! It's not plug and fly but once correclty setup it works like a charm. there are a lot of useful videos on how to program and install it.

• Overall
• Quality
• Value

Customer Rated

Mar 24, 2015

Two units was bought. MCU (not video chip) of the first one fried after two days of usage. After replacement of the dead MCU I have the same problem- inadequate temperature of the MCU. Nevertheless it still working after putting heat sink on the chip.
Second unit works perfectly except one thing: it is impossible to configure it through the serial link as the Tx channel of the OSD is dead. The quality of this product is really disappointing.