Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

Minimoa Motovelero OEP 2000 mm (PNF)

Minimoa Motovelero OEP 2000 mm (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
2649 g
SKU:
HK-Minimoa
Descripción
del

Este famoso planeador alemán diseñada en 1935 es casi un clásico de culto entre los pilotos de planeador de la vieja escuela y aquellos que buscan algo un poco diferente. Se nariz distintiva, cola corta y alas de gaviota son a la vez atractivo y funcional, ayudando a la versión original para llegar a un récord de altitud de 6,687m en 1938!

Nuestra Minimoa es un gran planeador (2mtr) PNF hecha de espuma EPO súper fuerte reforzada.
Este modelo viene pre-construido con motor, ESC y los servos ya instalado. Todo lo que necesita hacer es instalar su propio receptor y batería para estar listo para volar en 10 minutos.

El HK Minimoa está bien diseñado, con fácil acceso al compartimiento de la batería, y las alas que se elimina fácilmente con 2 tornillos de nylon y una abrazadera de soporte del ala, haciendo de este un planeador fácil de configurar en el campo y encajar en la parte trasera de su coche ya que toma alrededor de 3 minutos para montar las alas principales.
Las alas de gaviota se mantienen fuertes con 2 varillas de refuerzo, insertada en el momento de moldear la OEP; que están fijos en su lugar y nunca se moverán, proporcionando un apoyo firme y libre de decantación de las alas.

Todo está incluido con este kit, todo lo que necesita para ofrecer es su propio transmisor, receptor y batería (2200 mAh alrededor de 2 o 3S, 20C).

Especificación:
Envergadura: 2000mm / 78.7in
Longitud: 980mm / 38.6in
Peso: 720 g / 25,4 oz
Motor: 1200KV sin escobillas outrunner
ESC: 20A
Servo: 9gx4

Necesario:
Transmisor y receptor de Canal 4
Batería 3S 11.1V 2200mAh LiPoly

Nota * ala tiene dos largueros de refuerzo y 1 transversal del mástil miembro.

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    HK-Minimoa
  • Brand:
    No
  • Peso ( g)
    2649.00
  • Longitud
    1111.00
  • Ancho:
    230.00
  • Altura:
    245.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Aprs petites modifications d'entre et vacuation d'air pour le moteur et rgl le cg avec un poids fourni dans le kit et un accu 2200mA tout l'avant. Juste un mixage des ailerons en frein(relevs) une petite compensation profondeur(2mm piquer)et les snapflaps (35pcnt), trs beau vol jusqu' 20 Km/H. Trs content de mon achat (surtout pour ce prix!) pour un planeur trs joli en vol; voltige, s'abstenit!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bravo pour ce petit modle qui fait mieux que se "dfendre" : il vole et vole mme trs bien (max 25 km/h de vent).deux petites choses cependant, bien rgler le centrage au moins 65mm et non pas 54mm bord d'attaque; arer le cne moteur et le support hlice pour "ventiler" le moteur et creuser une aration devant le cockpit afin d'vacuer l'air chaud hors du fuselage. je l'utilise avec les dbattements maximum partout, du diffrentiel aux ailerons'2 voies) un mixage snap flaps et des freins (ailerons relevs et compensation profondeur 15 pcnt). Je l'ai achet juste pour le "look" mais il va devenir mon testeur de pente favori!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Had mine for about 12 months now. drilled out spinner for extra air flow over motor removed added weights and used 3000ma 3s climbs nice with a little down mix thermals great. Well done HK great first glider
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well finished, beautiful looking bird. I have read the forums and so have the manufacturer. They have put a latch to hold down the cockpit and even supplies some weights to add to the front. These were shortcomings that were pointed out from reviewers of the early version of this bird. Everything was great till I flew it and then the bird floundered in the wind like a dodo trying to fly and I eventually landed it with no damage. Discovered that who ever was responsible for attaching the motor took a nap and clean forgot to tighten the screws. It was a delicate job to reattach the motor due to the narrow confines. Bad Quality Control so this deserves 4 stars. I add my comments to help future buyers - check those motor mount screws!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Sorry, but at this glider definitely something is wrong designed. On the maiden light fist of all the engine goes out and I lost the spinner. Had immediately to go down not to crash it. On one wire on the end the engine was still holding, if this would not happen I would lose him completely.
After repairing and fixing the engine back, on the second maiden flight, the plane just want to go up and up, so I had to give the elevator to the max down, what is not good after turn of the engine.
Finale is necessary to adjust normally the elevator and keep it down during flight with engine so that is possible the gliding without engine.
Generally the designers did something completely wrong on this plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
fliegt aus der Box heraus, Schwerpunkt stimmt, alles ohne Probleme, Empfnger einbauen, Laufrichtung der Servos einstellen und los gehts.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I love flying my Minimoa. It is the most beautiful and graceful plane to watch in the air and all this for $110, thanks HobbyKing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
complete rubbish much much to heavy and electric motor got no power
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
?? ????? ? ?? ??? ?? ???.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received this plane from the USA warehouse in perfect condition. Every thing went together with no problems, until I tried to run up the motor. The motor would not run at all, it just stuttered. I removed the motor and found some broken wire coming out of the white wire and touching the metal base. I went ahead and removed the plastic mount with a dremel. I then epoxied a X mount to the nose and put in a Hyperion motor that came out of a 25e Hyperion Piper Cub. I used the spinner off my wrecked ArtTech Diamond 2500 with 12x7 folding prop. Because of the heavier motor, ESC, and spinner I ended up putting 1 Oz in the tail to get a good COG. I will maiden tomorrow.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.