Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

Mirage 4000 de combate w / sin escobillas EDF y retrae Plug-n-Fly

Mirage 4000 de combate w / sin escobillas EDF y retrae Plug-n-Fly

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
3389 g
SKU:
CBCMirage4K
Descripción
del

avión de combate acrobático altamente reducido EDF Plug-n-fly.The Mirage-4000 EDF chorro viene 97% pre-construcción y dispone de un potente sistema de EDF y tren de aterrizaje retráctil sin escobillas 45A. Pliego de condiciones: Envergadura: 785 mm Longitud: 1230mm Altura: 345 mm Peso del vuelo: 940g Canal: Motor 6 canales: 2600kv sin escobillas Outrunner ESC: 45A Servo: 7 x 9 g EDF: 70mm Requerido: Su propia Tx y Rx de la batería 2200mAh 14.8V 20C 4S

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    CBCMirage4K
  • Brand:
    N/A
  • Peso ( g)
    3389.00
  • Longitud
    1095.00
  • Ancho:
    185.00
  • Altura:
    350.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Guys, have found what I believe could be the source of the fan vibration at mid rpm. When I wobbled the fan end of the unit sideways I could feel a definite movement that I think is excessive for a hi speed motor. I dismantled the unit and found the front and rear bearings are loose in the housing, but a good fit on the shaft. I will lubricate the bearings as others recommend and re-assemble the unit using bearing lock(green Loctite) on the outside of the bearings to fix them in the housing. I will report my findings when I have tested my fix.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this plane for about a year ago.
This has been my favorite model from the start.
Very easy to control, flying both slow and relatively fast.
This was my first EDF model and fit fine for me as a beginner at the time, but the model is still as much fun to fly with today.
Fan is unbalanced and the retracts is no good, the nose wheel broke on my second takeoff.
I fly mostly on grass, so the small wheels were not ideal for this anyway, so I took off the wheels.
Wheel wells are now perfectly suited as a handle so the model is very easy to launch by hand.
It does high alpha very easily, just pull the elevator and control the throttle.
Good value for money!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Eu inaugurei o meu e voou perfeito, fcil de pilotar, tem pouso estvel e em alta velocidade tambm. Estou usando a configurao original Hk, tempo de voo com lipo 4s 2200mah 25/50c de 5 min. em breve vou atualizar para lipo 5s 35/70c, edf 70mm com 6 ps de 2600kv. comprei os vetores de cauda sugerido mas eles no cabem no avio, as sadas de ar so muito juntas, bom avio, estvel, rpido, estrutura de qualidade.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Once again i will give a 2 star till hobbyking stop deleting the true reviews from customers
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This model is one of those models that you spend half hour building and literally fly...the CG is right on with 2200mah 4s as recomended, power is good floats with no power, and looks awesome in the sky...i get these by standers going oohhh ahhh like they are making love with themselves.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received this plane as a gift. It was well packaged and had no damage. It went together well as most of it was built. It would have been great to have some short carbon spars or wood dowls installed so that there was something supporting and aligning the wings while they were glued....I installed my own.


I had to modify the hatch, the part that protrudes down into the battery area....this was too long and with my pack, the canopy would not seat. So I shortened it just a tad.

Landing gear...these needed a little bit of work. First the tail gear...the wheel and strut assembly has to be screwed into the retract mechanism...the strut is threaded on when end. A problem I encountered was the holes in the plastic retracts were not drilled deep enough. This caused me to strip them out slightly before I figured out what was going on. I ended up drilled them a tad deeper and they threaded in just fine...without doing this the wheels would not seat in the wheel wells when retracted. Second thing I found is the gear would not positively lock when extended. I found the retract mechanisms are of the lock design however on the rears, the linkage was not extended far enough to put them into lock position. The same was true on the front, however it was binding severely to get into lock. So pulled the front apart and with a dremel, smoothed down the cam inside the retract, reassembled, adju
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have a couple of these planes..... one of the best for the buck hands downs. She flies very stable....fast or slow. High Alpha is a blast. Big and durable being EPO.... does not get much better. I will order another for sure. 2 Thumbs Up.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is such a great plane, it flies so nice. It's no rocket, but plenty fast for me, and slow flight is so easy, no bad stalls. High alpha is no problem, just take the elevator back and slow down the throttle, and there you go.

The retracts are not good, loose, heavy and breaks of easy. I removed them on mine, and got at 1:1 power to weight ratio, it got 123 grams lighter.

With a Zippy 4s 2200mah 40c batt, and the CG just right. I get about 5 min. flights.

The quality is great accept for the retracts, and the esc is easy to setup, and the servos are cheap but do the job great.

All in all this is a great plane, I would recomend this Mirage 4000 to poeple who is trying edf for the first time.

I didn't buy mine from hobbyking, didn't know they had it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Best jet for the money.I have nine very nice jets and this on is the best flying.Retracts work great if you set your end point adjustment correctly. See how well it flys at >



http://www.youtube.com/watch?v=dgdpLfAh-4E
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice model, qc needs checking on though, 1 canard was damaged whilst it was packed in the box.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Mirage 4000 Fighter w/ Brushless EDF & Retracts Plug-n-Fly

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.