Multirotor fibra de carbono T-Style hélice 15x5.5 Negro (CW / CCW) (2pcs)

• Overall
• Quality
• Value

Very good and durable

Nov 08, 2021

Works great, balanced and extremely durable

• Overall
• Quality
• Value

Need some balancing

Feb 08, 2017

I bought 2 sets of them, 1 need no balancing, but, the others need some balancing using prop balancer.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 22, 2016

Top Quality, a bit balancing and ready to fly

• Overall
• Quality
• Value

Customer Rated

Mar 16, 2016

I've always been a big believer in you get what you pay for but today I was proven wrong. I've a full set of 15x5 t-motor propellors and they were a real pig to balance. It was mainly the hubs that were off which took the best part of a day to balance by grinding the heavier side and using glue on the lighter side.

However, I bought a set of these. For a fifth of the price the quality is far superior. Hubs are balanced and only a tiny amount of sellotape to balance to blades. They fit the t-motors perfectly, no boring the holes like some cheap quanum ones I had previously.

If your looking for props you can't go wrong with these.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 17, 2015

needs a little balancing, but flies really nice with these props

• Overall
• Quality
• Value

Customer Rated

Jan 12, 2015

Very nice props taking into consideration the price. they need a bit of balancing but not a big thing. I'm using it with my DJI 320kv motors - to fit them I needed to grind central part because they are to broad. Overall I recommend them as replacement of original CF props for DJI S800.

• Overall
• Quality
• Value

Customer Rated

Oct 20, 2014

I mounted these on my Hexacopter of 4Kg AUW. They hover well around 45pcnt throttle on 490kv motors and 4S setup.
Couple of them needed little balancing using dubro balancer. Build quality is sturdy. Overall best quality propellers, I believe there is no need to buy anything expensive, they are at par with much low price

• Overall
• Quality
• Value

Customer Rated

Sep 22, 2014

These props are fantastic! I bought them to be used in conjunction with the Turnigy Multstar 4108-480KV motors. The props are solid carbon fiber weave, not foam-filled laminated with the weave. They are extremely light yet stiff for their size. The construction quality is pretty good, not the best, but for the price? Unbeatable! I would highly recommend them to anyone interested in a great value!

• Overall
• Quality
• Value

Customer Rated

Aug 03, 2014

Didn't like these. The balance is really bad. Each pair,one prop is acceptably close and requires minor weight balance, while the other is wayout. Props are not as rigid as carbon props should be. Noticeably more flex than tarot props.

• Overall
• Quality
• Value

Customer Rated

Mar 12, 2014

These must be balanced before use. The 3 sets I have needed 2 or 3 100mm lengths of Sellotape "Diamond tape" on the back of the light blade. They are also too wide at the hub for the earlier style of top retaining plate ( it has 2 overhanging shoulders) of the Multistar 4114 320 kv motors that I have. ( the new stock of this motor is different in the picture and I suspect would be no problem. Still yet to run on my hex though)