Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global
  • USA

Multistar 2206-2150KV 3 ~ 4S 320W FPV Drone Motor "La bestia del bebé"

Multistar 2206-2150KV 3 ~ 4S 320W FPV Drone Motor "La bestia del bebé"

QTY:

Now save guardar 0,00 € 0,00 €

11,53 €
Stock:
Peso:
82 g
SKU:
9192000151-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

Buscando el sistema de energía final para su próximo proyecto multi-rotor? ¡No busque más!
Los outrunners Turnigy MultiSTAR están diseñados con una cosa en mente - maximizando el rendimiento del Multi-rotor! Cuentan con imanes de alta gama, rodamientos de alta calidad y alta recuentos de polo para reducir el ruido, potencia suave, sensible y una mayor eficiencia. Tienen montaje de encargo del motor, y todos son de precisión equilibrada para un funcionamiento suave, estos motores están diseñados específicamente para su uso multi-rotor y no se basan en motores de avión.

El 2206-2150KV Multistar apodado el "bebé bestia", es el motor del monstruo de las pequeñas cuadricóptero 250 de clase! Diseñado para 5 o 6 pulgadas 4 apoyos de hoja, este motor tiene un poder de barril, y listo para su plena carga 250. El motor se ha reforzado en todos los lugares adecuados para la durabilidad FPV, con un eje central de 3,17 mm, brida de 11 mm y prop un eje de la hélice de 5 mm, no hay necesidad de preocuparse por el árbol de vez en cuando en el camino. Está equipado con rodamientos de calzar y precargados y cables de silicio de alto grado. Si usted está buscando más potencia, durabilidad y valor por su multirotor sub-300mm, pensar .... Multistar 2206 la Bestia bebé

Multistar está simplificando el mundo de multi-rotores con su propósito construido línea de productos y tomar el trabajo de adivinar de su configuración.

* Nota: la longitud del tornillo de montaje inferior es fundamental para comprobar. La carcasa rebajado se redujo en altura para hacer un buen compacto 2206, la desventaja es el devanado del motor está más cerca de la parte inferior, para que los tornillos de montaje demasiado largo podría potencialmente en contacto con los devanados y dañar el motor.

El empuje de datos
Amplificación de empuje Tipo Prop
4 blade 5040 851grams 18.32amps

Especificaciones:
KV (RPM / V): 2150
Células Lipo: 3 ~ 4s
Potencia máxima: 320W
Amps max: 18A
Dimensiones (Dia.xL): 27 x 17 mm
Eje del motor: 3,17 mm (eje de la hélice de 5 mm)
Eje de la hélice: 5mm
Peso: 30 g
Espaciamiento de agujero de perno: 16 mm * 19 mm
Conectores: 2 mm de bala

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    9192000151-0
  • Brand:
    MultiStar
  • Peso ( g)
    82.00
  • Longitud
    100.00
  • Ancho:
    50.00
  • Altura:
    80.00
  • Kv (rpm / v)
    2150.00
  • Corrientes max (A)
    10.00
  • Potencia ( W ):
    120.00
  • B Longitud ( mm ):
    17.00
  • Puede longitud D ( mm )
    7.00
  • Max Voltaje ( V )
    12.00
  • Un eje ( mm ):
    5.00
  • Unit Weight (g):
    30
  • C Diámetro ( mm )
    28.00
  • Longitud Total E ( mm )
    34.00
  • Resistencia ( MH ):
    0.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
i Did not try it so far. But be careful:

The specs in the Description say 18 Amps 3-4 S.

The Spec Table says 10 Amps and 2-3 S (which is what the Package says as well.) No Mount ( M3.0 are needed i guess).
Update once i instelled it.




Quality
Value
Overall
Quality
Value
Overall
Let me just say that hobbyking makes good products. Motors run great and the price was good. Then while doing a checkout run on my new quad it turned into a 3 bladed lawn dart. Problem? The set screws on the motor were not installed. Glue for the screws lasted long enough to get in the air untill under stress. QC dropped the ball on me.
Quality
Value
Overall
Quality
Value
Overall
Ordered 4 of them, two came with noisy ball bearings, reflecting on a lot of vibration in the fpv video recording
the bad : poor quality control (ball bearings).
the good : runs warm with 6x4.5 , 3s battery, powerfull
Quality
Value
Overall
Quality
Value
Overall
Great motor with cool design and unstable quality. Ordered 5 of them. Two came disbalanced. One was rotating with noise because plastic clip inside the motor body which holds incoming wires was not in place, dont know how to repair it. Beasts are working with Red Brick 10A ESC (flashed Wii-ESC) at 2S and 3-blade GWS6030 just fine . My quad is almost happy with them, but still vibrating a lot. Will buy more with hope that they will come without defects.
Quality
Value
Overall
Quality
Value
Overall
As stated on video they don't actually work with the afro12a v3. Not sure if the afro need firmware update but has de-sync problems. If you do buy this motor with the recommended afro 12a esc make sure you also order the afro esc programmer.
Quality
Value
Overall
Quality
Value
Overall
Really very good quality. Best choice for 250 class multi copter
Quality
Value
Overall
Quality
Value
Overall
They got a good punch on a Laser230 frame and are decent value for the money, but need quite a bit of balancing. Still, a real nice choice for micro quads.
Quality
Value
Overall
Quality
Value
Overall
I got these motors. Running 3S 2200 30C battery with 5X4.5 3 blade props on the low slung 250. The motors are strong come down barely warm. I wish HK would sell them in a kit with two CW and CCW. I had been flying for a while then finally had one of my prop nuts back off resulting in a catastrophic crash broke the frame. I did put red lock tight on the nut, a guess not enough. This time I'm going to get nylock nuts and tie thread around props so they cant spin off. If you run these motors the motors that spin CW will tend to unscrew the prop nut. So M1 and M3 need to double nut lock tight or make sure the nut stays on double check every now and then.
Quality
Value
Overall
Quality
Value
Overall
Great little motors. I used them as an upgrade on my FPV250 V2 as I was tired of using 5x3x3 or 5x3x4 props with the stock motors. These swing a 5x3 prop nicely, plenty of power. Could probably even prop up to a 6x4 as these come down cool after a 5 minute flight.
Quality
Value
Overall
Quality
Value
Overall
A little heavy motors, but great perfomance. Running at 3S with a 500 gr self design quad, they work fine, smooth and powerfull. Recomended only to heavy microquads with rigid frame
Quality
Value
Overall
View all reviews
Upload
Videos
  • MultiStar 2206 Motor

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.