Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse

MultiWii y Megapirate regulador de vuelo AIO w / FTDI (ATmega 2560) V2.0

MultiWii y Megapirate regulador de vuelo AIO w / FTDI (ATmega 2560) V2.0

Now save guardar 0,00 € 0,00 €

41,13 €
Sin existencias!
Stock:
OUT OF STOCK
Peso:
45 g
SKU:
387000007

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Descripción
del

Esta tarjeta dispone de un interfaz de serie múltiple, así como una interfaz I2C dedicado. Ahora puede conectar un GPS directamente, y usted todavía tiene puertos adicionales para otros dispositivos externos. Además de eso, los nuevos ATmega 2560 tiene más pines IO por lo que puede tanto leer la señal PWM de su receptor y tiene suficientes salidas PWM para el control de los CES directamente sin la necesidad de hacer la señal PWM en el software.

Este controlador tiene incluso un puerto microUSB derecho en el tablero, no hay necesidad de conectar una interfaz USB adicional FTDI.

El lado de detección de movimiento cuenta con una nueva generación de MEMS Gyro, un MPU6050 por InvenSense, que tiene el sensor MEMS Gyro / acelerómetro en un solo chip. También hay un magnetómetro de 3 ejes y un sensor de barómetro con una resolución de 0,01 milibares - a unos 10 cm de diferencia de altura.

Interesados ​​en la funcionalidad de GPS? Pues esta es una de las maneras más rentables para empezar - sólo tiene que añadir un módulo GPS 10Hz (próximamente) y ya está bueno para ir!



caracteristicas:
• Con el apoyo del firmware MegaPirateNG y MultiWii
• Hasta 8 eje de salida del motor
• 8 canales de entrada para receptor estándar
• 4 puertos serie para la depuración / módulo Bluetooth / OSD / GPS / telemetría
• Salida de 2 servos para el sistema de PITCH y cardán RODILLO
• 1 salida de servo para activar un botón de la cámara
• 6 Salida analógica para extender dispositivo
• Un puerto I2C para extender sensor o dispositivo
• 3.3V y 5V independiente regulador de voltaje LDO
• ATMega 2560 microcontrolador
• MPU6050 6 ejes giroscopio / aceleración con la unidad de procesamiento de movimiento
• HMC5883L 3 ejes magnetómetro digitales
• MS5611-01BA01 de alta precisión del altímetro
• FT232RQ chips USB-UART y USB micro receptáculo
• A bordo de convertidor de nivel lógico



Modo de vuelo para MultiWii:
• Uno de los siguientes modos básicos
- Acro
- Nivel
- Hold Alt
- Headinglock

• El modo opcional
- Headfree (el CareFree)
- Retención de GPS (Necesidad receptor GPS)
- GPS Volver a la posición inicial (Necesidad receptor GPS)



Modo de vuelo para MegaPirate:
• Acro
• En espera Alt
• Loiter (utiliza el GPS)
• Guiado (utiliza el GPS)
• Posición (GPS utiliza)
• círculo (utiliza el GPS)
• RTL (utiliza el GPS)
• Auto (utiliza el GPS)
• Follow Me (utiliza el GPS)

tamaños:
Dimensión: 50mmX50mm
Altura: 11.6mm
La fijación de separación entre agujeros: 45 mm
Diámetro del agujero: 3 mm
Peso: 14,2 g

incluye:
1 x AIO PRO FC
3 x 3 pines para cable de 100 mm 1Pinx3
1 x 3 pines para cable de 100 mm 3 pines
100 mm de cable 1 x 1.25mm Molex de 4 pines
100 mm de cable 1 x 1.25mm Molex 6Pin del
100 mm de cable 1 x 1.25mm Molex 8Pin

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    387000007
  • Brand:
    N/A
  • Peso ( g)
    45.00
  • Longitud
    115.00
  • Ancho:
    25.00
  • Altura:
    95.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Pretty good, has all the sensors and lots of ports to plug pretty much everything. Not recommend for a small quad, but perfect for 400 experimental multirotors. Had some problems with serial3, when all other ports are busy it drops the speed.
Quality
Value
Overall
Quality
Value
Overall
Can not believe the sale price!!!! Picked up a few to go with my new colors!
Quality
Value
Overall
Quality
Value
Overall
Great fc for people that want to get into gps and open source fc's. This board is all inclusive at a great price. Will except a wide range of accessories with great community support.
Quality
Value
Overall
Quality
Value
Overall
Very good board with ATmega 2560, full of features and expansion possibilities. Great!
Quality
Value
Overall
Quality
Value
Overall
Amazing features with so many interfaces. Was able to update firmware using only mission planner only. Had it running Megapirate in under 5 minutes. included cables are also a bonus. Do wish there was more documentation though
Quality
Value
Overall
Quality
Value
Overall
I have bought two of these now and absolutely love them! Both projects were hex copters. Gps is easy to attach, I recommend the NEO-6M GPS Module.
Quality
Value
Overall
Quality
Value
Overall
easy to flash with the Megapirate Flash Tool, works great in my Plane
Quality
Value
Overall
Quality
Value
Overall
I have this for almost 6 months and still haven't discovered all of the options. So far I've connected: bluetooth (must have), OLED (sold - no use for it), telemetry, GPS, minimOSD. USB port is well soldered - no problem with it.
Very good sensors - compass needs to be far away from ESC, barometer needs thick foam glued on. Default MW PIDs work with most X and frames. AltHold needs tuning, but that's another story.
All in all - great product, worth it's price. APM has nothing on it.
Quality
Value
Overall
Quality
Value
Overall
Excellent quality and price, full of features and expansion possibilities.
Quality
Value
Overall
Quality
Value
Overall
Very impressed by this board! I flashed it with MegapirateNG, connected a GPS receiver (uBlox Neo 6) and a Bluetooth module.

Flying goes very well! Also altitude hold & loiter are handled perfectly by this board. I recommend buying the Bluetooth module as it makes configuring a lot easier, with e.g. an Android phone or tablet.

If you're a beginner: this might be a bit too difficult to start with. Maybe the KK2.1.5 is a better choice in that case.
If you are experienced and you want to move on: this is definitely the board for you. Be aware that you need a bit of computer skills (compiling the Arduino code), but when you have everything up and running, this is an amazing piece of hardware!!!
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.