Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

MultiWii regulador de vuelo ATmega32U4 MicroWii USB / BARO / ACC / MAG

MultiWii regulador de vuelo ATmega32U4 MicroWii USB / BARO / ACC / MAG

Now save guardar 20,66 € 20,66 €

Special Price 8,53 € 8,53 €

You save guardar 20,66 € 20,66 €

Was  29,19 €

Sin existencias!
Stock:
OUT OF STOCK
Peso:
34 g
SKU:
9387000008

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Descripción
del

El MicroWii es un controlador de vuelo completa multi-rotor. Se basa en la ATmega32U4, que es el procesador de la Arduino Leonardo. El MicroWii incorpora un chip MPU-6050, que es un giroscopio y un acelerómetro combinado más un barómetro MS5611 precisa y magnetómetro HMC5883L.

Esta es la última solución para un rendimiento potente vuelo con su proyecto multi-rotor. Las posibilidades son infinitas con el MicroWii, sólo limitado por su imaginación!

caracteristicas:
• USB en el chip (sin FTDI o UART es necesario)
• Puerto serie libre (que es posible utilizar un satélite DSM2 junto con la interfaz gráfica de usuario)
• 6 entradas de los receptores
• 6 de alta resolución salidas PWM (11 bits)
• Es compatible con todas las configuraciones hasta OKTO con soporte de leva-puñalada
• 2,5 kb de RAM
• ATmega32U4 basado Leonardo con el cargador de arranque
• 10DOF matriz de sensores
• MPU-6050 (GYRO / ACC)
• HMC-5883L (MAG)
• MS5611-01BA03 (BARO)
• / conector Bluetooth GPS (en la parte inferior, y sólo satélite GPS o DSM2 se pueden utilizar en un momento dado que el 32U4 sólo tiene una UART)

Especificaciones:
Chip principal: ATmega32U4
Velocidad de la CPU: 16MHz
Tamaño de inflamación: 32 kB (3.3kB son tomadas por el gestor de arranque)
Entrada: 6 x entradas de RX de alta resolución (2 canales AUX)
Salida: 6 ~ 8 salidas de motor (motor 1-6 son de 11 bits PWM)
Dimensión: 50x50x16mm
Peso: 14g

* Nota: Este no es un producto original de marca Arduino.

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    9387000008
  • Brand:
    No
  • Peso ( g)
    34.00
  • Longitud
    70.00
  • Ancho:
    20.00
  • Altura:
    65.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This is a nice board, but it lacks memory. The unstable barometer uses just enough that you can add a lcd. That would be a great improvement. The board and components are well constructed. About the barometer, it is unstable and needs a filter capacitor to buff the noise. Even buffered it still don't actually want to hold at any height. A suggestion is if you purchase this board is to omit the barometer and use it like any other multiwii board. If anyone knows how to do that please post it!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This FC board is very nice but is not so used, there are no tutorial about it and if it's your first FC is quite hard to setup and make it work. Anyway i worked out most of the problem, and i can say that the flight is very stable now. If you are looking for a manual, you can find it in the International Warehouse product, but is not so completed and well explained. Anyway, it's a nice FC!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this for building a octocopter with altitude hold. After a lot of fiddeling, changing code etc, I gave up trying to get 8 motor channels working. The barometer pretty much sucks, very fuzzy uneven readings (installed a capacitor helped a little), but who wants to do SMD on a small flight controller? You also need to enclose the sensor, or it will go banana as soon as some wind gets to it. I ended up destroying the board because the capacitor came loose, tearing a bit of the copper off at the same time.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've bought it to replace a MultiWii328P. It slightly more expensive, but I can use the USB and a satellite receiver port together. It works very well with MultiWii 2.2.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Worked good for a long time. Everything worked exactly as it should. Until one day magic smoke appeared from the possessor. After that it was useless. I think it's good value, however it does not have enough memory it needs to use all the multiwii features. For example GPS.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good product, it's my first quad , with this FC it was easy to configure with Multiwii 2.3 , but be carefull of the pinout, i add a document which describe the association
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This board is not worth anything it does not work you will break you're quad before anything.....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Es ist ein sehr gutes Board. Ich benutze es mit MW 2.2. Die vielen Sensoren ermglichen viele Mglichkeiten. Das Board ist gut verarbeitet. Leider habe ich aber Probleme mit der Bindung eines Bluetoothmoduls mit dem seriellen Port.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought it for my mini quadrocopter. I flashed it with MultiWii 2.1, everything works fine if you define following switches in MW source: #define FREEIMUv043
#define A32U4ALLPINS
#define RCAUX2PIND17
Quad hovers very stable. Using the board in combination with attached orange rx100 satellite which also works great.
Don't know if MultiWii 2.2 will bring any improvements, for now i will stick with 2.1
Mayke sure you only connect it to USB 2.0 otherwise it won't work.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ho montato questa Multiwii sul x230 mini quadcopter, finalmente sono riuscito a fare funzionare tutto.

Ho usato il software multiwii 2.2, per fare andare la scheda e poter usare tutti i canali bisogna attivare questi valori nel file config.h

#define FREEIMUv043 // same as FREEIMUv04 with final MPU6050 (with the right ACC scale)

#define FORCE_MAG_ORIENTATION(X, Y, Z) {magADC[ROLL] = X; magADC[PITCH] = Y; magADC[YAW] = Z;}

#define A32U4ALLPINS

#define RCAUX2PIND17

facendo questo la pinnatura dell'input della rx sar modificata risultera la seguente partendo dal THR:

Thr - Yaw (Coda) - Aux1 - Pitch (Elevatore) - Roll (Alettoni) - Aux2

Cosa molto importante anche mettere la scheda nel verso giusto, il senso della freccia e la lettera N serigrafata sulla scheda indicano il verso di montaggio, in pratica la scheda andr montata col connettore USB rivolto nella parte posteriore del quad, e cmq non di spigolo come altri fight controller.

Prossimamente montero anche un GPS, ma adesso devo prima affinare i settari, anche se con quelli di default il quad vola gia abbastanza bene.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.