Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

MultiWii V2.0 regulador de vuelo w / FTDI

MultiWii V2.0 regulador de vuelo w / FTDI

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
30 g
SKU:
381000133
Descripción
del

La V2.0 MultiWii es un controlador de vuelo giroscopio / acelerómetro de que se carga con las características. Con opciones de expansión y capacidad de programación completa, este dispositivo puede controlar casi cualquier tipo de aeronave. Este es el controlador de vuelo ideal para su avión multi-rotor.

caracteristicas:
• Tamaño pequeño, agujeros de montaje 35x35mm
• 6 canales de entrada para receptor estándar y el receptor PPM SUMA
• Hasta 8 eje de salida del motor
• Salida de 2 servos para el sistema de PITCH y cardán RODILLO
• Se puede utilizar la salida de un servo para activar un botón de la cámara
• Toma de TTL de FTDI / UART para la depuración, el firmware de carga o pantalla LCD
• Toma de I2C para extender sensor, LCD I2C / pantalla OLED o junta CRIUS I2C-GPS NAV
• 3.3V y 5V independiente regulador de voltaje LDO
• ATMega 328P microcontrolador
• MPU6050 6 ejes giroscopio / acelerómetro con unidad de procesamiento de movimiento
• HMC5883L 3 ejes magnetómetro digitales
• Sensor de presión digital BMP085
• A bordo de convertidor de nivel lógico

Modo vuelo:
• Uno de los siguientes modo básico
- Acro
- Nivel
- Hold Alt
- Bloqueo de la cabeza
• El modo opcional
- Headfree (el CareFree)
- Retención de GPS (Necesidad receptor GPS + I2C-GPS Junta NAV)
- GPS Volver a la posición inicial (Necesidad receptor GPS + I2C-GPS Junta NAV)

Especificaciones:
Dimensión: 40x12x40mm
Peso: 9,6 g
La fijación de separación entre agujeros: 35 mm (Se puede cambiar a 45 mm por el Consejo CRIUS Distribución)
Diámetro del agujero: 3 mm

Contenido del paquete:
MultiWii FC x 1
(Cable mini USB es necesario, pero se vende por separado) 1 x tablero programa USB
3 pines al cable 1Pinx3 100 mm x 2
3 pines a 3 pines cable de 100 mm x 1


Más información se puede encontrar en el sitio web MultiWii.
http://www.multiwii.com

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    381000133
  • Brand:
    N/A
  • Capacidad ( mAh )
    No
  • Peso ( g)
    30.00
  • Longitud:
    130.00
  • Ancho:
    10.00
  • Altura
    90.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Never Buy it from them. they will send you

XZN MWC MultiWii SE Standard multi-Copter 4-axis Main flight con

http://www.geeetech.com/xzn-mwc-multiwii-se-standard-multicopter-4axis-main-flight-con-p-552.html

this board which is very poor and cheaper(US 19) than the item shows in their listing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
They sent me the wrong board the 1st time. Did a RMA to replace wrong board and they sent me the same wrong board again. Can't comment on functionality because I've never received what I ordered!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good board for my 20 cm. arm small tricopter flying great with D2822/17 kv 1100 motor and 1,5 Ah lipo pack for about 10 minutes of very fun.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi All! I've got MultiWii 2.0 installed and running on my Quadro. HobbiKing Rx, HobbiKing 10A ESCs are used. Previously I used HobbyKing Multi-Rotor Control Board and it flied well. On this MultiWii control motors running not fast enough to take quadro off the ground. Even if I move throttle stick to the most up position it does not fly. Can anyone say what is wrong?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice board flying very well But when I tried to plug the battery monitor on A3 input as shown on file "pin assignments" (lipo directly on this input) I burn the Atmega ...I had to add the divider resistor before input the direct lipo voltage.So be carefull bfore wiring this batterie monitor input (A3 pin).
I put a updated picture of the pin assignments with the rsistors in the file section
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this board on a 55cm quad, replacing a homemade combo of Arduino ProMini and 4 single sensors boards... Adding a LZ-GPS was very easy because I2C is brought out on its own pin header. The HK S2 V2 board has the Crius V2 layout and comes with preloaded MultiWii 2.1 firmware for Quad X constellation. Firmware can easily be updated or changed to any other config with the FTDI header and Arduino 1.01 software. The MPU 6050 gyro/acc gives really great and stable flight behaviour with an very smooth ACC level mode never seen before. BMP baro is not state of the art anymore (low resolution), but its OK to get a height hold mode within 2-3 meters. Overall: Great board with good quality, small boards size, totally worth the money. Will buy a 2nd one for my Flydumini as soon as they are on stock again.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A good product!!! This comes pre-programmed. But the PID values are all out of boundaries. So you will face a hard time setting it up...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bu gne kadar kullandm kartlar arasnda en iyisi.
gps modl de almanz tavsiye ederim.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The ever expandable MultiWii controller
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The 0.03 hectopascal maximum resolution of the BMP085 is an optimum enabling the sensor to respond to differences in altitude of 25 cm.



At this days pressure sensors have ~ 10cm. altitude sensitivity!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.