Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • USA

MXS-R Acrobático 3D Avión 20CC Balsa 1625mm (ARF)

MXS-R Acrobático 3D Avión 20CC Balsa 1625mm (ARF)

QTY:

Now save guardar 0,00 € 0,00 €

244,55 €
Stock:
Peso:
7500 g
SKU:
248000004-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

Uno de los aviones acrobáticos buscando más caliente alrededor es el MXS-R. La buena apariencia por sí sola no es suficiente, el Hobbyking MXS-R 20CC ha sido diseñado con una cosa en mente, impresionante y acrobacias aéreas extremas.

La calidad de la MXS-R 20CC es simplemente tan bueno como se pone, la estructura del avión se ha construido para mantener el peso volar mínima, pero lo suficientemente fuerte para soportar el castigo de las acrobacias aéreas extremas. La excelente calidad de cobertura ha sido aplicada por expertos y para el toque final, los pantalones de la capucha, del pabellón y las ruedas tienen un acabado en pintura brillante de profundidad. El hardware que incluye ruedas, tanque de combustible y los cuernos de control de fibra de carbono es excelente y también elegido para mantener el peso volar a un mínimo absoluto. Además de las características modelo de complemento en las alas y el aterrizaje de fibra de carbono conjunto de engranaje y rueda de cola.

El HobbyKing MXS-R 20CC realiza cada pulgada tan bien como se ve, naturalmente, que lo convierte en un gran avión acrobático deporte, sino que sería justo decir que el hardcore en 3D es lo que el MXS-R ha sido diseñado. El peso ligero y la precisión de la estructura del avión, las grandes superficies de control, impresionante aspecto y las características principales de calidad de línea hacen que el MXS-R 20CC un avión debe tener para todos los pilotos acrobáticos y 3D!

caracteristicas:
• casi listo para volar - Sólo tiene que instalar su elección de motor, la batería y la electrónica
• Construcción de balsa y contrachapado
• conjunto de tren de aterrizaje de fibra de carbono y la rueda de cola
• Dos enchufe pieza en las alas
• Con una excelente aplicado, de alta calidad que cubre
• plano de cola de perfil aerodinámico completo / ascensor / aleta y el timón
• Excelente combinación de colores para una fácil orientación
• escotilla de acceso grande fuselaje
• extremos de las alas opcional generadores de fuerza lateral

Especificaciones:
Envergadura: 1625mm
Longitud: 1.500 mm
Área de ala: 50.1dm2
Vacío Peso: 2700G

Se requiere:
20CC del motor de gas
6 Standard- alto par servos
5-6 canales transmisor y el receptor
receptor de la batería
Varios Adhesivos

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    248000004-0
  • Brand:
    No
  • Peso ( g)
    7500.00
  • Longitud
    1230.00
  • Ancho:
    295.00
  • Altura:
    470.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
This is a very well made airplane.
This MXS-R is also made under brandnames like Aerobeez and/or Flight Models.
The airplane looks a lot like Extreme Flight, only this one is a little bit heavier.
The airframes weight is just above 2 KG (this is without electronics/motor).
I have converted mine to electric. My setup is: TurnigySK3-5055/430kv motor, and 100 A esc with BEC.
Lipo battery is 3700Mah 6S. APC 16x10 propellor. Total weight just under 3200 grams.
I haven't flown it yet, but expectations are high.
Quality
Value
Overall
Quality
Value
Overall
Hi everyone,

I highly recommend this kit, it is a top quality ARF with strong hardware. I had to reorder due to my learning curve in gas engines. Installed an OS GT-22 with rubber mounting (Dubro) and it is a great choice. Used recommended servos but make sure you put a strong receiver battery (ideally the most powerful 2S lipo suggested).

I'm still in the break-in period with the motor so not completely sure but I'd say this is not a pure 3D model, more a Sport flying but I will try to move weight and maybe use a smaller gas thank. Other than that go ahead and order it for such a low price!
Quality
Value
Overall
Quality
Value
Overall
Update now that the MXS-R is built.
Hardware spec (electric conversion) is:

Motor: Turnigy SK3 5055 430kV
ESC: Yep 120A c/w 10A SBEC
Battery: 6s, 5000mAh, 40c
Prop: Zoar/JXF 18x8 wood
Servos: 'Goteck' HV Std size Coreless

It all went together perfectly. I used 75mm standoffs to position the motor. The dual elevator servos needed 2mm packers to stop them hitting each other. balance was spot on.
She flies great, ample power and needed virtually no trim. the wheel pants cracked a little due to longish grass but that's a general problem with wheel pants when flying off grass. Handling is great, very little coupling and good post stall handing, no wing rock to speak of. Highly recommended.
Quality
Value
Overall
Quality
Value
Overall
Top quality kit, rivaling the liked of Extremeflight. This is the exact same airplane that you can buy elsewhere for double the price from the likes of Aerobeez and others.
Quality of the airframe and components really are top notch. The only slight criticism I can level at it is the paint on the canopy does not match the covering very well but that's not a big deal.
One thing to watch when choosing servos: Servo cutouts are for standard size servos, but infill plates for mini servos are supplied. The dual elevator servos ideally need to be quite low profile to avoid them hitting each other. About 22mm from bottom of servo case to mounting tab, max.
Quality
Value
Overall
Quality
Value
Overall
Wow! What a great flying plane and at such a great price. One of the best looking and best flying planes you can have. I have had many including 3d HobbyShop and this compares to it. Does anything you want and can just Elevator it down to the runway. Check around and you will see Hobbyking has it 100-200 dollars cheaper than other sites. This is a "Flight models" model. I have the green one and know bought this one.
Quality
Value
Overall
Quality
Value
Overall
Just want to start by saying, what a great quality kit. All the hardware is top quality with carbon fibre horns and ball joints. Everything fitted together well with a few small adjustments here and there. Being my first balsa kit it was still quite straight forward to put together. The supplied CD contains a basic manual that is some help but leaves a fair bit to the imagination.

I set my plane up as ep with an ntm 5060 380kv motor, yep 100amp esc, 4500mah 6s batt, 18x10 wood prop and towerpro mg996r servos . All that was needed to make it ep was a hk adjustable motor mount.

The only problems with the build being the 2 elevator servos hit together inside the fuse as it get very narrow towards the tail. I fixed this by putting a small block of wood on one side of servo as a spacer. Also a similar problem with the control horns in the rudder touch as you push them though either side so can't go all the way in but I just evened them out and glued them and they seem solid.

Quality
Value
Overall
Upload
Videos
  • 20cc MXSR

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.