Nemesis NXT fibra de vidrio 1450mm (ARF)

• Overall
• Quality
• Value

Ein schönes Modell

Apr 07, 2017

Schönes Flugzeug, sehr "preiswert,aber: "Steckungen" für Tragfläche und HLW sind aus CFK Vollmaterial, durch Röhrchen ersetzen, auch wg. Gewicht. Überhaupt, ist das Modell im Heckbereich zu schwer gebaut. Um den Schwerpunkt auf ca. 60 mm von der Nasenleiste zu bekommen, musste ich noch ca. 180 Gramm in die Nase packen, obwohl ich den 5000er Akku 6S bis vorne in den Motordom gelagert habe. Von einer Rasenpiste ist das Modell kaum vernünftig zu starten geschweige zu Landen, weil das Fahrwerk so nahe am Schwerpunkt liegt. (Kopfstand) Das Ding fliegt sonst sehr gut und schnell. Ich habe ein Einziehfahrwerk verbaut. Beim Fahrwerk ist ein weiterer Schwachpunkt. Wegen des rel. hohen Gewichts von 4200 gr. und der schlechten Fahrwerksbefestigung, wenig Klebstoff an den richtigen Stellen, blieb das Fahrwerk auf unserer Rasenpiste bei der 1. Landung am Aufsetzpunkt alleine zurück. habe das wieder repariert und weitere Flüge gemacht. Wie gesagt, große Probleme bei Start un Landung auf Rasen.

• Overall
• Quality
• Value

Good Looking Plane

Mar 02, 2017

I received the plane kit, I try to assembly it but only to find out that there is no CA hinges included for the rudder. Also there a minor damages in the cowling and the rudder has been seperated from fiberglass. I will use G60 for the motor, I am hoping that the oleo strut included can fit to Servoless Retract with Metal Trunion 44mm x 41mm Mount. They claim in the description that I can use the Oleo strut and put it to Ratract. But overall It is Beautiful plane, I cant say anything about that.

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 20, 2016

Well I just got her and may I say, WOW she is a beaut! The wings seem a bit short, at first, till you realize the body adds over 6 inches, to the wing length. Then you will get another 4 inches, from the add on wing tips. Just be ready to have one half of the wing, to be completely, "Baby Blue" with no body cut in. (You can see what I mean if you look closely at photo 7 on the listing). Hay I have a long way to go with her yet, so stay tune for more to come. Also I do think it would be worth, buying retracts for this one.

• Overall
• Quality
• Value

Customer Rated

Nov 26, 2015

This is such a great kit! and one of the most beautifully finished fuselage for @$100.00! currently on the bench and getting closer to maiden-day, I can't wait!,NTM 5050-580kv,A-spec 3700-6s-60c,deluxe 100a esc,hk 41x40 plastic retracts-5mm,16x10 apc

• Overall
• Quality
• Value

Customer Rated

Sep 08, 2015

I received my Nemesis over the weekend and was pleasantly surprised. Good quality and surprisingly strong formers to add strength and durability to this model. Landing gear mounts are strong- there is plenty of support inside the fuselage and that paint job is awesome. My only problem- the vertical stab has some damage. The support where you would attach the rudder has been broken so come loose from the fibreglass- it is however fairly simple to repair.

I look forward to building and flying her.

• Overall
• Quality
• Value

Customer Rated

Mar 07, 2015

Very beautiful and well painted plane. Got mine with slightly damaged tail and cowling as others but nothing serious. The packing is wrong no styrofoam and both ends of the plane get bashed in transportation.
If you plan to make I bullet out of this like I did - forget about it. Fuselage is insanely wide like a boat, can accommodate 12s battery and a 1kg motor but the wings won't lift it up. On 6s I believe this will fly like a warbird but not a racer due to very thick forms. 1.6m wingspan P-51 I have has fuselage at least twice thinner.

• Overall
• Quality
• Value

Customer Rated

Aug 23, 2014

She is a real Beauty and Looks awesome - very smooth and shiny finish.
Fuselage is quite heavy and has a lot of heavy bulkheads which can/should be removed.
horizontal tail and rudder are extrodinary heavy and should be rebuilt of light balsa.
Wing tips are also heavy but no idea how to replace them without too much efford.
Spars for horizontal tail were missing in my kit - no Problem at all (Standard CfK-tubes)
Wheels are on the small side (but almost scale) - wheel cutouts in the fuselage have a Diameter of ~70mm; expandable to 90, maybe even 95mm (limited by to bulkheads).
Who accepts a little (more) effort on this plane will get a real bargain.

• Overall
• Quality
• Value

Customer Rated

Apr 07, 2014

I received this beautiful kit well painted in an undamaged box only to find the cowl was pushed up against the motor mount causing 4 ugly holes in a otherwise beautifully well built kit. Hobby king are there spare parts you can offer for this plane.

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 11, 2012

2 tage nach bestellung bereits erhalten!! alles war sehr gut verpackt!! der flieger sieht einfach super toll aus!!! rumpf ist wirklich sehr schn verarbeitet. flgel und hhenruder knnte etwas schner sein! aber fr diesen preis top! ein paar kleinteile waren leider nicht vollstndig im set enthalten... sollte aber kein problem sein! das GFK vollrohr fr das hhenruder war leider in 4 kurze stcke geschnitten, anstatt in zwei lange!

ein fahrwerk kam schon zerbrochen. HK habe ich kontaktiert und die werden mir das fahrwerk ersetzen. leider dauert es 3 monate!! was ich ziemlich lcherlich finde! mchte nicht wissen, wie lange es dauert, wenn das kit mit einem defekten rumpf oder flgel kommt...

der flieger ist ein echter hingucker...super schnes modell! werde es mit 6 oder 8S betreiben.

flieger TOP....fahrwerk service FLOP!