Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Junta de Control de Vuelo Openpilot Mini CC3D

Generating Links

Junta de Control de Vuelo Openpilot Mini CC3D

Precio:

Now save ahorra 7,53 € 7,53 €

Special Price 7,62 € 7,62 €

You save ahorra 7,53 € 7,53 €

Was  15,15 €

Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
571000053-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

Junta de Control de Vuelo Openpilot Mini CC3D

Este es el nuevo controlador de vuelo Mini CC3D. Es aproximadamente la mitad del tamaño de la CC3D regular, pero tiene la misma funcionalidad. La junta Mini CC3D es un controlador de vuelo de hardware todo-en-uno de estabilización, que se ejecuta el firmware OpenPilot. Se puede volar cualquier fuselaje de ala fija a un Octocopter y está configurado y controlado mediante el software potente y fácil de usar la estación de control de tierra OpenPilot (GCS).

Usando el potente STM32 de 32 bits micro controlador le da características de manejo preciso cuando se vuela a su TRICOPTER vuelo, quad, hexagonal, Octocopter, e incluso los aviones de ala fija. El tamaño pequeño le permite adaptar este, incluso en los marcos más pequeños.

No se deje engañar por el tamaño. Mini CC3D proporciona una funcionalidad similar a otros controladores de vuelo de gama alta a una pequeña fracción del costo.

caracteristicas:
• Alrededor de la mitad del tamaño de la normal OpenPilot CC3D, pero con la misma funcionalidad.
• El CC3D proporciona una sensación más clara cuando se vuela tricopters, quads, hexas, octocopters y aviones de ala fija, incluso.
• Potente STM32 de 32 bits micro controlador funcionando a 90MIPs con 128 KB de Flash y 20 KB de RAM.
• 3 ejes de alto rendimiento MEMs giroscopios y 3 ejes MEMS de alto rendimiento acelerómetro.
• PCB de 4 capas para la reducción de ruido eléctrico superior y un rendimiento de vuelo.
• El soporte de software para Windows, Mac y Linux.
• Soporte de alta velocidad USB directa sin controladores necesarios.
• Soporte de receptor de satélite Spektrum.
• soporte de hardware S-BUS Futaba.
• La tecnología Flexi-puerto innovadora para la flexibilidad de los puertos superior.
• 4Mbits EEPROM a bordo para el almacenamiento de configuración.
• Esta placa OpenPilot Mini CC3D viene en una alta calidad, caja protectora.
• pasador horizontal

Especificaciones:
Tamaño: 28x21x9mm
Peso: 4g

El paquete incluye:
1 x Mini regulador de vuelo CC3D
1 juego de cables

  • Mini CC3D & Nano N32 FC
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

FlyHi | Comprador verificado

  • Overall
  • Quality
  • Value

Top value

Mar 22, 2022

Top, nice and tiny!

auke | Comprador verificado

  • Overall
  • Quality
  • Value

Great!

Jan 27, 2020

Great unit, small price.
All you need to fly!!!!
(safe and easy)

Daniel | Comprador verificado

  • Overall
  • Quality
  • Value

Great for micro quads

Jun 13, 2017

I mounted this little board in a crusader 130 frame with some 1306 3500kv motors and 3035 x3 props. After downloading librepilot, updating the firmware and configuring my radio/quad, I took it for a spin with the default settings. It flew surprisingly great! The only downside so far is that the boot pins are not exposed in the board, meaning no flashing with betaflight unless you have a STM link. Still a great board for small copters or even helis.

Roland | Comprador verificado

  • Overall
  • Quality
  • Value

I love it!

Jan 22, 2017

Plugged and supplied it and rhino update was done in a few moments. great product, i like librepilot and its options.
i run this one on a race quad, and the settings can be adjusted by fine steps. there are a lot options with this flight controller and a wide community with good support. for basic settings there are a lot of youtube vids too. will buy it again for next multirotor.

andreas..k | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 04, 2016

ordered this one for fixed wing- 4 flap wing- to have some differet stabilisation options during thermal flights- offeres 6 setups that you can change via TX. very very good hardware- and you need some time to work with it as it offers lots of functions, nothing to be compared with a 3 axis flight stabilisation

Terry | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 26, 2016

Nothing I can do with this board. Librepilot will not update. It downloads and then times out at the bootloader stage. This tells me that the board does not have a bootloader. In addition to that there are no boot pads like on the cc3d. That means there is no way for me to load a bootloader.

Christian | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 17, 2016

If you directly hookup a satelite receiver to the main or flexi port (e.g. Spektrum SPM9645 <4g) you end up with a receiver flight controller solution that
weighs 8g in total.

Since the SPM9645 runs on 3.3V you need to add a 3.3V regulator (e.g. AMS1117) - the CC3D runs on 5V.

The only drawback is - if you wan to have
satelite receiver GPS OSD current measuring module - there aren't enough connections.
If you want/need all of the above go with the CC3D revolution instead.

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 22, 2016

surprised at the size very small very stable will be using this board for more projects only thing make sure your using a cord that does more then charge a phone or board will not connect to computer love this controller will be getting more

Soldier2580 | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 27, 2016

I could not get serial connection via Openpilot GCS to this board, tried different firmwares, bootloaders and GCS but no serial connection. Then I flashed cleanflight for CC3D and it works :) I see no reason at all to buy the twice as expensive NANO N32 board, that one doesn't even have onboard FTDI (USB) which I find very usefull

lweber | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 30, 2015

Fantastic capability at an amazing price. The Openpilot GCS makes it easy to set up and optimize for most options. The CC3D Atom might be a better choice to drive servos on flybarless helicopter.

Archivos de clientes
custom PDB Download [261]
33CDMini Layout Download [132]
Layout Download [562]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios