New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

OrangeRX abierto LRS 433 MHz transmisor 1W (JR / Turnigy Compatible)

OrangeRX abierto LRS 433 MHz transmisor 1W (JR / Turnigy Compatible)

Shipped From:
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

28,45 €
Estado:
En stock
SKU:
9171000284-0
WANT FREE SHIPPING? Click here to find out more!

El nuevo módulo TX todas OrangeRX Abiertas LRS es un módulo transmisor de código abierto que puede ser programado para utilizar el tipo de protocolo y cualquier canal en el rango de 400 ~ 460MHz. Es un sistema transmisor de RF totalmente personalizable por el usuario. Incluso se puede programar para utilizar las características adicionales, tales como telemetría cuando se utiliza con el módulo OrangeRX OpenLRS Rx.

El OrangeRX abierto LRS TX Módulo una unidad muy versátil perfecto para sus proyectos personalizados.
Se utiliza una unidad de 1000 mW RF y el procesador Atmega328 con Arduino Bootloader que le permite cargar los códigos pre-escrito o escribir su propia para adaptarse a sus necesidades del transmisor.

El código por defecto utiliza 3 canales de salto de frecuencia. Si desea utilizar un protocolo diferente, puede escribir sus propios códigos de lupulación o simplemente descargar uno de los muchos juegos de códigos OpenLRS pre-escritos que ya están disponibles.

caracteristicas:
• Soporte de 3.3v FTDI para una fácil programación (no utilice los adaptadores de serie 5V / AVRISP)
• puerto serie para una carga de firmware y la aplicación de telemetría
• Puerto I2C para aplicaciones de sensores (Wii Motion Plus Headtracker basados)
• Procesador de 16 MHz Atmega328 con Arduino Pro Mini cargador de arranque compatibles.
• Regulador de tensión de 3,3 voltios LM2937
• conector UFL entre el PCB y la antena
• Zumbador para información audible
• La salida de 1000mW, salto de frecuencia y capacidad de cientos de funciones

Especificaciones:
Compatibilidad: 5 pines JR compatibles transmisores basados ​​en módulos
Frecuencia: 433 MHz
Entrada de tensión: 6,8 ~ 12VDC
IC: ATmega328P
Potencia: 1000mW
Rango: Sistema completo Gama

incluye:

OrangeRx OpenLRS Tx Módulo (compatible JR)
Antena

* Nota: La configuración y el uso de LRS abierto requiere conocimientos de programación de ordenadores y experiencia básica Arduino. Este no es un sistema "plug and play". Ver el documento adjunto en la pestaña "Archivos" de recursos en información de programación, descargas de firmware y más.

* Nota: LRS Abiertas utiliza el soporte 3.3v FTDI, NO use un adaptador de serie 5V / AVRISP o puede ocurrir daño.

* Nota: Por favor, consulte a las autoridades locales en relación con la operación de este equipo antes de comprar. Reglamento sobre la salida de potencia, frecuencias utilizables y licencias para operar varían de una región a otra.

* Nota: Este no es un producto original de marca Arduino.

  • SKU (Número de Referencia) 9171000284-0
  • Brand Orange
  • Capacidad ( mAh ) -
  • Peso 78.0000
  • Longitud 90.00
  • Packaging Width 35.00
  • Altura 70.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This was the best emitter that could even be used as receiver using the Ultimate LRS software. Compatible with Ardupilot telemetry, it provides an awesome range.
Considering that you don't even need the hkpilot telemetry set when you use these, I can say the value for the price is amazing. Please HK we need restock! Check the ultimate LRS website to see the improvments that you should make to this module to get the best range possible.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This was the best emitter that could even be used as receiver using the Ultimate LRS software. Compatible with Ardupilot telemetry, it provides an awesome range.
Considering that you don't even need the hkpilot telemetry set when you use these, I can say the value for the price is amazing. Please HK we need restock! Check the ultimate LRS website to see the improvments that you should make to this module to get the best range possible.

Best LRS option considering its price in the market so adviced.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Best LRS option considering its price in the market so adviced.

good for mods with my apm. nice

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good for mods with my apm. nice

these have crap range out of the box but all you need is to turn the stock antenna into a half wave whip all you need is a wire and antenna tube start at 350mm and slowly cut it back checking rrsi dont cut shorter than 310mm use a quarter wave on rx i left the rx in my house and walked half way across town without lossing signal i didnt go to the max range ill never fly that far away

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

these have crap range out of the box but all you need is to turn the stock antenna into a half wave whip all you need is a wire and antenna tube start at 350mm and slowly cut it back checking rrsi dont cut shorter than 310mm use a quarter wave on rx i left the rx in my house and walked half way across town without lossing signal i didnt go to the max range ill never fly that far away

WARNING! I bought 3 of these orange lrs modules and in ALL of them the ground plane on the pigtail was broken. If you are getting 200-300m range probably yours is broken too. And here is the real fun part: You probably burned the TX at this point(practically run the module without antenna)

I strongly recommend running a continuity test on the pigtail before ever turning the module on. Also if you have an soderin iron put dab of soder on SMA's pins. That was botced one of my modules too. Seriously messed up QC

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

WARNING! I bought 3 of these orange lrs modules and in ALL of them the ground plane on the pigtail was broken. If you are getting 200-300m range probably yours is broken too. And here is the real fun part: You probably burned the TX at this point(practically run the module without antenna)

I strongly recommend running a continuity test on the pigtail before ever turning the module on. Also if you have an soderin iron put dab of soder on SMA's pins. That was botced one of my modules too. Seriously messed up QC

After a couple of months I have been trying to get my OpenLRS Orange RX 1W TX to work correctly. It's still not, at least not as good as you'd expect it to work.
No problem with the flashing process (OpenLRSNG) and binding, so far everything was fine. However, even with decent antennae (SR771 on TX and Sander on RX), the maximum range I could achieve was 1.8Km, beyond that the RX went into failsafe. Not even close to what you can get with FrSky system (I have achieved 2.5Kms easily).
I also had a defective pintail that was replaced by an SMA cable directly soldered onto the board. At full power, the transmitting power is ~420mW which is supposed to give ~50Km range with good antennae.
A friend of mine had the same setup and didn't manage to get it to work correctly having a range even worse than mine. We decided to go back to FrSky which works way beyond what you can expect of a 2.4G system.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After a couple of months I have been trying to get my OpenLRS Orange RX 1W TX to work correctly. It's still not, at least not as good as you'd expect it to work.
No problem with the flashing process (OpenLRSNG) and binding, so far everything was fine. However, even with decent antennae (SR771 on TX and Sander on RX), the maximum range I could achieve was 1.8Km, beyond that the RX went into failsafe. Not even close to what you can get with FrSky system (I have achieved 2.5Kms easily).
I also had a defective pintail that was replaced by an SMA cable directly soldered onto the board. At full power, the transmitting power is ~420mW which is supposed to give ~50Km range with good antennae.
A friend of mine had the same setup and didn't manage to get it to work correctly having a range even worse than mine. We decided to go back to FrSky which works way beyond what you can expect of a 2.4G system.

Works excellent with my Turnigy 9x (ER9X firmware). Flashed with the newest version of openLRSng it provides lots of cool features, such as Spectrum Analyzer or telemetry (orange RX module can transmit data back to TX module which beeps on lost packets). Overall, OrangeRx Open LRS is one of the best TX modules you can buy for your JR or 9x transmitter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works excellent with my Turnigy 9x (ER9X firmware). Flashed with the newest version of openLRSng it provides lots of cool features, such as Spectrum Analyzer or telemetry (orange RX module can transmit data back to TX module which beeps on lost packets). Overall, OrangeRx Open LRS is one of the best TX modules you can buy for your JR or 9x transmitter.

There is no information regarding whether the unit requires to be flashed with the firmware in order for the unit to work. So, I tried to bind it to a OrangeRx open lrs 9 channel receiver. It never made the five beeps and never bound. After making 20 attempts to get the firmware updated (it would never connect), using the Orange RX firmware update kit, I noticed the unit LED's were dead and I am assuming the unit is now dead. Not worth spending $20 to ship it back to China only to have to wait for several months to get another one back, assuming HK will actually warranty it.
Waste of money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There is no information regarding whether the unit requires to be flashed with the firmware in order for the unit to work. So, I tried to bind it to a OrangeRx open lrs 9 channel receiver. It never made the five beeps and never bound. After making 20 attempts to get the firmware updated (it would never connect), using the Orange RX firmware update kit, I noticed the unit LED's were dead and I am assuming the unit is now dead. Not worth spending $20 to ship it back to China only to have to wait for several months to get another one back, assuming HK will actually warranty it.
Waste of money.

Incorrect part sent to me. One month on, still waiting for part to be authorised and delivered.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Incorrect part sent to me. One month on, still waiting for part to be authorised and delivered.

Great little thing here. I have a FrSky DF combo which I'm very satisfied with, but aiming for longer range brought me to this and adding also the fun setting it up, choosing and flashing firmwares, the possibility to flash it as a receiver and have 1W telemetry in both ways, makes this module unbeatable.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little thing here. I have a FrSky DF combo which I'm very satisfied with, but aiming for longer range brought me to this and adding also the fun setting it up, choosing and flashing firmwares, the possibility to flash it as a receiver and have 1W telemetry in both ways, makes this module unbeatable.

  1. 1
  2. 2
  3. 3
Customer files
Conexión externa FTDI al receptor Download [3366]
how connect tx module to hk usb tool Download [2623]
Flash OrangeRX LRS FW and Taranis Download [1236]
this document helped me alote Download [164]
ULRS - Go for it Download [773]
better photo of pcb Download [4350]
No File Name Download [2054]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save