Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • USA

Receptor 2.4Ghz 4Ch Compatible Micro OrangeRx R415 DSM2

Receptor 2.4Ghz 4Ch Compatible Micro OrangeRx R415 DSM2

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
29 g
SKU:
R415

Combine

essential items and
servo
acc
Descripción
del

Compatible con todos los transmisores DSM2.

Una pequeña foamie perfecta o receptor de interior. Muy pequeño y muy ligero!
La nueva gama de receptores OrangeRx se construyen con componentes originales y de MCU y con el estado de la automatización SMT para asegurar un producto de calidad cada vez.
Todos los receptores OrangeRx se prueban control de calidad antes de salir de fábrica.
El OrangeRx trabajará con cualquier transmisor de 2,4 GHz compatible DSM2

El OrangeRx R415 4 canales micro sólo 2,0 g de peso y 29x15x8mm de tamaño. Grande para los planos micro, pequeñas y foamies interiores parkflyers.

Las características clave.
2,0 g de peso ligero estupendo!
Voltaje: 3.6 ~ 9V
Compatible con DSM2 1024/2048 radio de la aeronave y sistemas de módulos
4 canales
29x15x8mm compacto diseño
antena de 29 mm corto para montar en casi cualquier lugar.
Micro Molex 3 conectores de clavijas con 1,25 mm de espaciado

Incluido.
OrangeRx R415 4 canales micro receptor compatible DSM2

*Nota:
1) Esto no es un producto Spektrum DSM2, ni es una copia de un producto Spektrum DSM2.
La marca Spektrum DSM2 y es una marca comercial de EE.UU. Horizonte aficiones.
2) No se trata de un producto Spektrum falsa mercado negro subterráneo. Se garantiza la calidad OrangeRx.
3) Aceptada por el MAAA en Australia, ver el MAAA MOP58 de orientación

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    R415
  • Brand:
    N/A
  • Capacidad ( mAh )
    No
  • Peso ( g)
    29.00
  • Longitud:
    59.00
  • Ancho:
    5.00
  • Altura
    45.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 4 of this receiver, only 1 work. The other 3 has a brownout issue and crashed my brand new plane. Always do range test first before flying and don't use the receiver if it failed on range test. I already crashed my plane before I learned this. I hope this will not happen to others. The good thing is hk gave me credit points for all 3 that have failed. Unfortunately I crashed my aircore airframe because of it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
small compact dsm 2compatible! im using it for small indoor toys

micro
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Small and light receiver. Suited for micro servo connector sold here. Ex. HK-5330. Work from 3V up.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice little receiver, I've bought a few of these. The HK micro 1.7g servos plug straight in (micro-Molex 'picoblade' connectors) and the pin assignments are shown on the label of the Rx so you can check that your servos match the pinout.

Beware the relatively high minimum operating voltage for 1S applications - I've used these in gliders, with just the servo loads to worry about, and had no problems at all with brownouts or range on 1S, but if you're also driving a motor, most ESCs don't cut the throttle until the voltage drops to around 3.0V, and this Rx is only specified to run down to 3.6v.

HK sell a voltage booster that can (allegedly) supply about an amp at 5.0v from 1S, but if you want to supply the receiver via that and the servos/ESC straight from the LiPo, you'll need to sort out level matching on the signal connections. For 1S powered models with motors, the SuperMicro range of receivers sold by HK now include some DSM2 models with built-in ESC etc, which cost more but probably work out simpler.

Overall, these little receivers are brilliant value and perform very well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A fantastic little RX! I used this, paired with Hobbyking 3A Single Cell ESC (Product=11885), to convert a Ky0sh0 minium warbird which had numerous TX/RX issues. Was fairly close to a PNP refit.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good receiver, good quality....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bon produit rein a dire
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
perfect little receiver for my 900mm mini DLG glider. using Molex to servo-lead adapters. runs on 1s or 2s Lipos. outputs were lableld correctly. had to have power to battery input in order to bind. very nice. Roger
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
worked a treat but no leads available.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This receiver is worthless. It's impossible to bind the receiver to a Spektrum DM8 HF Module. I tried 2 different R415 without success. After long brainstorming with other users I can exclude all other error sources.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
servo
acc

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.