New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

P-47 Thunderbolt Compuesto 1800mm (ARF)

P-47 Thunderbolt Compuesto 1800mm (ARF)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
P-47D
WANT FREE SHIPPING? Click here to find out more!

Precio de venta $ 179 Limtied Stock


El P-47 Thunderbolt fue producido en mayor número que cualquier otro boxeador estadounidense, aunque podría decirse que fue en el papel de caza / bombardero que el "jarro" realmente hizo su nombre y fue uno de los mejores Ataque en tierra de aeronaves de la 2 ª Guerra Mundial, allanando el camino para el concepto moderno de aviones capacidad multi-función.

Este es un gran rayo! Diseñado como un modelo semi-escala Deportes, ofrece todas las ventajas de un buen volante deportivo combinado con un Warbird buscan lo mejor de ambos mundos. Nada vuela como un gran pájaro de guerra y no hay duda, este modelo tiene un aspecto fantástico en el aire, motor de gruñir ya que strafes la pista de aterrizaje! Para los entusiastas del warbird escala hay un montón de posibilidades de "ampliación", pero que vuela tan bien, no va a ser una reina de la suspensión que sólo puede ser trasladado cuando las condiciones son tan.

El acabado de pintura que cubre y está bastante excepcional, un kit completo de hardware se incluye y se fija con arreglo al carro también se incluye, el modelo también se retraiga listo para aquellos que no quieren dangly la pierna de arruinar la mirada! Hay una gran cantidad de espacio en el fuselaje para el engranaje RC y una amplia gama de dos motores de brillo y de gas para elegir, una cosa es segura, no va a ser una acumulación caro para un modelo de este tamaño y clase. Con solapas para mantener baja, bajo peso al vuelo velocidad de aterrizaje y un ala de pájaro de guerra diseñada para evitar desagradables, como punta-estancamiento, esta es una gran opción para una, cada volante deportivo práctica día con un poco de carisma.

Especificaciones:
Envergadura: 1800mm
Longitud: 1400mm
Área de ala: 42dm2
Carga alar: 107g dm2
Peso del vuelo: 4500g
5-6 Canal

incluye:
Instrucciones
Todo Hardware Inc tanque de combustible y el motor se montan
Hoja de la etiqueta

Se requiere:
Su propio canal 6 TX / RX
6-7 servo estándar
0.90 1.20 dos tiempos o de cuatro tiempos Motor del resplandor
20cc motor de gas 26cc ~
1.20 retrae de clase (Opcional)
batería RX

  • SKU (Número de Referencia) P-47D
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 7305.0000
  • Longitud 1195.00
  • Ancho 365.00
  • Altura 385.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Bought this a while ago for $150.00 I have been recovering from some issues with my heart but I couldn't pass on this aircraft now I just checked the aircraft out in my recovery center room pic attached nice bird for the bucks spent some issues but nothing that will keep this from moving forward. damage on the rudder feathers ,wrinkles on the covering but I am very happy with it overall.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this a while ago for $150.00 I have been recovering from some issues with my heart but I couldn't pass on this aircraft now I just checked the aircraft out in my recovery center room pic attached nice bird for the bucks spent some issues but nothing that will keep this from moving forward. damage on the rudder feathers ,wrinkles on the covering but I am very happy with it overall.

Ok I hate when people complain about the instructions. But the instructions are no help(build the wing install the engine) lol. no instructions on where to bolt the engine I did it centerd right to left and then from center of the crank to the top of the cowl same as crank to the sides. I did not beef up the gear mounts and it is holding up well. all the hardware is good I did add a joiner wire between the elevators I don't like Y connectors on elevators. build was easy and fast. power is from a bx1 1.08 2 stroke mg heavy duty on elevator and rudder standerd on ailerons. First flight nice long rollout easy takeoff cog is perfect as per the instructions took me a lot of lead to get it there. 2 clicks of trim and she flew nice and well behaved tracking is rock steady. in a stall she just drops her noes and stays level. this plane is clean fast a joy to fly no bad habbits in the air landing gear is crazy wide so landing is cake. flaps work well need a bunch of down elevater mixing but stays stable. Overall I love this plane fun build fun to fly looks nice and it is fast. fiberglass is thin in non critical areas some cosmetic flaws. After fliying it I no it can easily handle a 180fs or 30cc gas.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok I hate when people complain about the instructions. But the instructions are no help(build the wing install the engine) lol. no instructions on where to bolt the engine I did it centerd right to left and then from center of the crank to the top of the cowl same as crank to the sides. I did not beef up the gear mounts and it is holding up well. all the hardware is good I did add a joiner wire between the elevators I don't like Y connectors on elevators. build was easy and fast. power is from a bx1 1.08 2 stroke mg heavy duty on elevator and rudder standerd on ailerons. First flight nice long rollout easy takeoff cog is perfect as per the instructions took me a lot of lead to get it there. 2 clicks of trim and she flew nice and well behaved tracking is rock steady. in a stall she just drops her noes and stays level. this plane is clean fast a joy to fly no bad habbits in the air landing gear is crazy wide so landing is cake. flaps work well need a bunch of down elevater mixing but stays stable. Overall I love this plane fun build fun to fly looks nice and it is fast. fiberglass is thin in non critical areas some cosmetic flaws. After fliying it I no it can easily handle a 180fs or 30cc gas.

The kit was in dbl box all parts bagged and taped down well. No damage in shipping. The fiberglass is thin in non critical areas so you can't man handle it like some other fiberglass kits. Some paint bleeding on cowl and panel lines and the fuse does not have perfect lines. Due to those to things i'd say this is not the plane to try to all out mod and make a super scale p-47. However I wanted a good looking large warbird to put a big engine on and go fast at a good price! And this plane is perfect for what I want it for. It is good looking nicely built I would buy it again now that I have seen it up close. I will post a build review and flight review once it is in the air.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The kit was in dbl box all parts bagged and taped down well. No damage in shipping. The fiberglass is thin in non critical areas so you can't man handle it like some other fiberglass kits. Some paint bleeding on cowl and panel lines and the fuse does not have perfect lines. Due to those to things i'd say this is not the plane to try to all out mod and make a super scale p-47. However I wanted a good looking large warbird to put a big engine on and go fast at a good price! And this plane is perfect for what I want it for. It is good looking nicely built I would buy it again now that I have seen it up close. I will post a build review and flight review once it is in the air.

Sehr schnes Kit! Man sollte nur die spannten und die klebestellen GFK/Holz kontrollieren und am besten mit einer lage GFK verstrken. Die Landeklappen werden ber umlenkgestnge vom rumpf aus angelenkt, also keine seperaten Landeklappen Servos in den Flchen, sondern nur eins im Rumpf. Ich finde die Lsung garnicht verkehrt, aber wer mchte kann auch zwei servos von oben in die flchen setzen, was aber zustzliches gewicht bedeutet.
Leider fehlt die bauanleitung, aber eigentlich ist alles sehr eindeutig. Ich werde baustufenfotos, und nach dem erstflug auch den CG hier nachtragen. Fr gewhnlich liegt der aber im bereich der hauptsteckung.
Also: Updates folgen....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr schnes Kit! Man sollte nur die spannten und die klebestellen GFK/Holz kontrollieren und am besten mit einer lage GFK verstrken. Die Landeklappen werden ber umlenkgestnge vom rumpf aus angelenkt, also keine seperaten Landeklappen Servos in den Flchen, sondern nur eins im Rumpf. Ich finde die Lsung garnicht verkehrt, aber wer mchte kann auch zwei servos von oben in die flchen setzen, was aber zustzliches gewicht bedeutet.
Leider fehlt die bauanleitung, aber eigentlich ist alles sehr eindeutig. Ich werde baustufenfotos, und nach dem erstflug auch den CG hier nachtragen. Fr gewhnlich liegt der aber im bereich der hauptsteckung.
Also: Updates folgen....

Customer files
P-47 Thunderbolt Composite 1800mm Download [1490]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save